What type of vehicle is the Tiida?

What does it mean when brake pads reach the wear limit?

Brake pads reaching the wear limit means that the brake pads have reached their maximum allowable wear and need to be replaced promptly. Failure to do so may result in brake failure and damage to the brake discs. The following situations indicate the need for brake pad replacement: 1. Check the thickness: Typically, a brand-new set of brake pads is about 1.5cm thick. When the visible thickness is less than 0.5cm, it's time to prepare for replacement. Each brake pad also has raised indicators on both sides, which are about 2-3mm thick. This represents the minimum replacement thickness limit. If the brake pad thickness is level with these indicators, immediate replacement is required. 2. Listen for sounds: If you hear a metallic scraping or hissing sound when lightly applying the brakes, the brake pads must be replaced immediately. This indicates that the wear indicators are already grinding against the brake disc, showing the pads are beyond their limit. 3. Feel the resistance: If the brake pedal feels soft or requires deeper depression to achieve normal braking performance, or if the pedal position is noticeably lower during emergency braking, this suggests the brake pads have likely lost their friction capability. Replacement is crucial at this stage to prevent serious accidents.

6

2

Share

What is the steering angle between the steering wheel and the wheels?

The steering wheel typically rotates 540-630 degrees from the center to one side, corresponding to a wheel turn of approximately 40-42 degrees. For every 13-16 degrees of steering wheel rotation, the wheels turn by 1 degree. One full rotation of the steering wheel results in a wheel turn of about 25 degrees. When the car's steering tires and the body are perfectly aligned, the steering wheel is at 360°, and the steering tires are at 45° because the steering tires can only turn up to 45° left or right. Steering wheel techniques: For a left turn, first activate the left turn signal, use your left hand to turn the steering wheel to the left, and assist with your right hand to push it left. After the turn, use your right hand to turn the steering wheel back to the right to align the direction straight. For a right turn, first activate the right turn signal, use your right hand to turn the steering wheel to the right, and assist with your left hand to push it right. After the turn, use your left hand to turn the steering wheel back to the left to align the direction straight. For continuous curves, the key is to reduce speed. Before entering the curve, slightly lean to the right. If turning right, lean slightly to the left. The exact number of steering wheel rotations depends on the actual situation.

3

5

Share

How to deal with the electronic parking brake failure of Haval H6?

Haval H6 electronic parking brake failure solutions: 1. Temporary fault code: You can first try to restart the car to see if the fault code still exists. If the fault code disappears and the vehicle is functioning normally, no further action is needed; 2. Wiring issues or onboard computer problems: If the fault code persists after restarting the vehicle, it indicates wiring issues or problems with the onboard computer. The Haval H6 is a flagship model under the Haval brand, positioned as an urban intelligent SUV. It offers Mitsubishi 2.0L gasoline-powered models and Green Power 2.0T diesel models, with dimensions of 4640mm in length, 1825mm in width, and 1690mm in height, and a wheelbase of 2680mm.

9

1

Share

How to Avoid Crossing the Line in S-Curves?

In Subject 2 of the driving test, the most challenging part of navigating an S-curve is maintaining control without crossing the lines. Simply relying on mnemonics like "turn once, then straighten" makes it difficult to master the technique. Here are the most effective methods to avoid crossing the line in S-curves: 1. Use the car's roof corners to align with the lines: There's a useful mnemonic for S-curves—"left point aligns with the right line, right point aligns with the left line." The left and right points refer to the front corners of the car's roof. When turning in a particular direction, use the corresponding roof corner to follow the opposite side's edge line. 2. Slow down in advance: Before entering the curve, reduce your speed. If you're going too fast, it becomes hard to observe and steer simultaneously, increasing the risk of crossing the line and failing. Additionally, follow the principle of taking the outer line by choosing the path with the largest turning radius. For example, if preparing for a left turn, keep the vehicle to the right side. 3. Steering technique: Starting with a left turn, when the left corner of the car touches the right edge line, turn the steering wheel one full turn to the left, keeping the left corner aligned with the right edge line. This ensures the vehicle stays within the lines.

2

0

Share

What is the difference between direct injection and multi-point fuel injection in cars?

The biggest difference between direct injection engines and multi-point fuel injection engines lies in their fuel injection methods. As we all know, the fuel injection system of automobile engines has evolved from the earliest carburetors to single-point fuel injection, and then to multi-point fuel injection. Each evolution aims to further improve combustion efficiency by enhancing fuel injection efficiency. The specific details are as follows: 1. Multi-point fuel injection engine: Taking the most common 4-cylinder gasoline engine as an example, you can see 4 intake manifolds (black tubes) on the engine, each responsible for the intake of one cylinder. Multi-point fuel injection technology involves installing an electronic fuel injector in each intake manifold. The high-speed air flowing into the intake manifold mixes with the gasoline sprayed by the electronic fuel injector, forming a combustible mixture, which is then drawn into the cylinder for combustion and work. These injectors in the intake manifolds are responsible for fuel injection in their respective cylinders (divided into single-point and multi-point injection), hence the term "multi-point fuel injection" technology. 2. Direct injection engine: Simply put, it involves moving the electronic fuel injector from the intake manifold of a multi-point fuel injection engine to the cylinder head, allowing the electronic fuel injector to directly spray gasoline into the cylinder. The gasoline then mixes with the air entering the cylinder from the intake manifold before combustion and work.

4

2

Share

Where is the Brake Disc Wear Limit Indicator Located?

The three grooves on the surface of the brake disc serve as the wear limit indicators. When these three grooves are worn flat, it's time to replace the brake disc. Alternatively, you can use professional tools to measure the remaining thickness of the brake disc and compare it with the standard thickness. If the wear reaches 2mm, it indicates that the brake disc has reached its wear limit. Below is relevant information about brake discs: 1. Replacement timing: Brake discs typically need replacement after a vehicle has traveled 60,000-80,000 kilometers, though this isn't absolute. The wear condition of brake discs is closely related to the road conditions and driving habits of the owner. If the owner frequently drives in mountainous areas or congested urban roads where braking is more frequent, the wear on the brake discs will be greater, shortening the replacement cycle—sometimes requiring replacement before reaching 60,000 kilometers. Conversely, if the owner primarily drives on highways where braking is less frequent, the service life of the brake discs will naturally be longer. 2. Methods to determine replacement: If professional tools aren't available to measure the wear level of the brake disc, you can also judge the depth of scratches by touching the edge of the brake disc with your hand. If the edge becomes relatively sharp and there are obvious scratches on the surface, this indicates severe wear and the need for timely replacement. Note: Do not touch the brake disc when the car is hot, as it can easily cause burns.

20

5

Share

What type of vehicle is the Tiida?

What does it mean when brake pads reach the wear limit?

What is the steering angle between the steering wheel and the wheels?

How to deal with the electronic parking brake failure of Haval H6?

How to Avoid Crossing the Line in S-Curves?

What is the difference between direct injection and multi-point fuel injection in cars?

Where is the Brake Disc Wear Limit Indicator Located?

How to Open the Rear Door of a Land Rover?

What is the ground clearance of the Excelle chassis?

Can the following vehicle use high beams when tailing the leading vehicle at night?

How Early or Late Can a Driver's License Be Renewed?