What Type of Vehicle is the Great Wall Pao?

Will sleeping in a car without opening the windows in winter cause oxygen deprivation?

Yes, it can cause oxygen deprivation. Due to the difficulty of air convection between the inside and outside of the car, carbon monoxide emitted by prolonged engine operation will gradually accumulate inside the vehicle. Additionally, the oxygen in the car will be consumed by the occupants' breathing while carbon dioxide is exhaled. Over time, the oxygen level inside the car will decrease, and the occupants may unknowingly suffer from poisoning and lose consciousness, which can be life-threatening in severe cases. Below are precautions for sleeping in a car: Maintain air convection: Ensure air convection between the inside and outside of the car to allow fresh air to enter for breathing. Besides turning on the external circulation mode, you can also slightly open the car windows. This will not significantly affect the air conditioning effect inside the car while maintaining air exchange between the inside and outside. Lock the doors: When sleeping in the car, make sure to lock the doors securely and store valuable items properly in hidden places to prevent theft.

19

2

Share

What Does the Free First Maintenance at a 4S Shop Include?

Here is an introduction to the first maintenance of a car: 1. Engine: After cleaning and filtering the engine three times, it should ensure that the engine starts easily, runs smoothly, and the exhaust meets standards, with no abnormal noises, water leakage, oil leakage, electrical leakage, or air leakage. 2. Steering: The free travel and toe-in should meet requirements, steering should be light, flexible, and the front wheels should not wobble or deviate when driving. 3. Clutch: The operation should be convenient, separation thorough, engagement smooth, with no abnormal noises, and the hydraulic system should not leak oil. Check the transmission, drive, and front axle for good lubrication, reliable connection, easy gear shifting, and no oil leakage. Inspect the brake pedal and service brake to ensure good braking performance, no deviation or oil leakage, and the inertia proportioning valve works normally. 4. Tire Pressure: The tire pressure should be normal (according to the high and low-pressure standards specified for the same model). Accessories such as the generator, starter, lights, instruments, signal lights, buttons, and switches should be complete, intact, and functioning properly.

3

4

Share

What to Do When Your Driver's License Accumulates 12 Points in a Scoring Cycle?

Motor vehicle drivers must report to the traffic management department of the public security authority within 15 days to participate in a 7-day study session on road traffic safety laws, regulations, and related knowledge (Subject 1). They must then take an examination. Those who pass the exam will have their points cleared. The specific procedures are as follows: 1. The motor vehicle driver must report within 15 days to the traffic management department of the public security authority in the jurisdiction where the driver's license was issued or where the violation occurred to participate in a 7-day study session on road traffic safety laws, regulations, and related knowledge. 2. After completing the study session, the vehicle management office will administer an examination on road traffic safety laws, regulations, and related knowledge within 20 days. 3. Those who pass the examination will have their points cleared and their driver's license returned. 4. Those who fail the examination must continue to participate in study sessions and retake the exam. Those who refuse to participate in the study session or take the exam will have their driver's license suspended by the traffic management department of the public security authority.

16

1

Share

What is the width of a single lane on the highway?

For highways designed with a speed of 120km/h, the lane width is 3.75m, and the emergency stopping lane width is 3.5m. Here are the relevant details: 1. Article 78: Highways shall indicate the speed limit for each lane, with the maximum speed not exceeding 120 kilometers per hour and the minimum speed not less than 60 kilometers per hour. On highways, the maximum speed for small passenger vehicles shall not exceed 120 kilometers per hour, for other motor vehicles it shall not exceed 100 kilometers per hour, and for motorcycles it shall not exceed 80 kilometers per hour. 2. For two lanes in the same direction: the minimum speed for the left lane is 100 kilometers per hour; for three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 kilometers per hour, and for the middle lane it is 90 kilometers per hour. If the speed indicated by road speed limit signs is inconsistent with the above lane speed regulations, the speed indicated by the road speed limit signs shall be followed.

9

5

Share

What Causes Compressor Failure?

Compressor failure may be caused by liquid refrigerant entering the compressor, resulting in liquid compression, or poor oil return to the compressor. Below are detailed explanations of compressor failure: Liquid compression inside the compressor: When liquid refrigerant enters the compressor, it causes liquid compression, leading to the breakage of the scroll. As the liquid refrigerant enters the compressor chamber and undergoes compression, the incompressibility of the liquid exerts extreme lateral shear forces on the scroll, causing the fixed and orbiting scrolls to break and the compressor to seize. The solution is to immediately close the compressor's suction shut-off valve and stop the liquid supply by closing the expansion valve. Poor oil return to the compressor: Poor oil return (oil shortage) in the system prevents the compressor from delivering sufficient oil to all lubrication points. This causes friction at each lubrication point to intensify progressively from bottom to top. The friction leads to overheating of the orbiting scroll bushing, eventually causing it to burn out or even seize. In severe cases, the bushing may experience significant wear and breakage. It is essential to promptly check and replenish the compressor oil.

11

2

Share

What Are the Hazards of Idling for 2 Hours to a Car?

Idling for 2 hours can cause several hazards to a car, including carbon buildup, excessive fuel consumption, and damage to the catalytic converter. The specific hazards are as follows: Carbon Buildup: If the engine runs at idle for a long time, the throttle opening will be very small, and the fuel injector will spray highly concentrated fuel to keep the engine running. Therefore, idling itself is more likely to cause carbon buildup compared to driving or highway speeds. Prolonged idling will inevitably lead to more severe carbon buildup in the engine, directly affecting the car's power and comfort. Excessive Fuel Consumption: According to tests, idling for three minutes consumes fuel equivalent to driving one kilometer. This means that idling for 2 hours can consume almost 2–3 liters of fuel. Catalytic Converter Damage: Prolonged idling results in an overly rich air-fuel mixture in the engine, leading to low oxygen content in the exhaust gases. The unburned mixture may combust at the catalytic converter, which can easily damage it.

5

Share

What Type of Vehicle is the Great Wall Pao?

Will sleeping in a car without opening the windows in winter cause oxygen deprivation?

What Does the Free First Maintenance at a 4S Shop Include?

What to Do When Your Driver's License Accumulates 12 Points in a Scoring Cycle?

What is the width of a single lane on the highway?

What Causes Compressor Failure?

What Are the Hazards of Idling for 2 Hours to a Car?

Why does the car make a squeaking sound when braking?

What is the purpose of automatic headlights in vehicles?

How often should engine oil be changed if the car is not driven much?

How is a truck overloaded by 20% penalized?