What type of USB interface does the Baojun 730 have in the car?

3 Answers
TannerDella
08/26/25 3:17am
The Baojun 730 car USB interface is a universal interface, which can be used to plug in a USB drive to listen to music, charge mobile phones and MP3 players, serve as a USB car cigarette lighter interface, function as an interface for electronic dogs and dash cams, and charge computers and tablets. The main purpose of the USB interface in the car is to use the car's standard power supply to charge DC-5V electrical appliances via the USB interface or to serve as a fixed power interface for electrical appliances. Here are some precautions for using the car USB interface: 1. Charging should only be done when the car's engine is started to avoid damage to electrical appliances due to unstable car power supply. 2. Do not connect too many electrical appliances to avoid overloading and damaging the car battery and generator. 3. Do not use the USB interface during thunderstorms to avoid lightning strike accidents. 4. Do not use the USB interface in a humid environment, as rust or water stains may cause the USB drive to fail to connect properly.
Was this review help?
20
5
Share
LeGideon
09/08/25 3:42am
The USB port in the Baojun 730 is a standard USB Type-A, supporting both data transfer and device charging. I often use this port to connect my phone for music or charge my tablet while driving, and its location is usually in the center console or dashboard area, making it very convenient for daily use. The port has a common rectangular shape with strong compatibility, working with most USB cables, such as those for Apple or Android devices. It is typically USB 2.0 or higher, offering adequate but not fast data transfer speeds. When charging, ensure stable current to prevent device overheating. It's recommended to regularly check for dust buildup to avoid loose connections affecting functionality. Overall, this simple yet practical design meets family travel needs and enhances in-car entertainment.
Was this review help?
6
4
Share
Expand All
RafaelLynn
10/22/25 3:45am
The USB port type of the Baojun 730 is a standard USB-A port, which I frequently use when driving my kids to school. It allows direct connection of a USB drive for music playback or charging phones, and the port is securely fixed inside the car without loosening. The port is a standard USB 2.0 type with decent charging speed, but I recommend using original cables to avoid voltage instability. In daily use, it eliminates the hassle of external chargers, making it very user-friendly. If the port stops working, check the wiring connection first before rushing to replace the device. Overall, this port enhances driving convenience, especially during long trips.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

Where is the coolant temperature gauge on the Rena?

The Rena does not have a coolant temperature gauge, only a temperature warning system is retained. Taking the 2020 Rena as an example, it belongs to the subcompact car category with body dimensions of: length 4300mm, width 1705mm, height 1460mm, wheelbase 2570mm, fuel tank capacity 43L, and curb weight 990kg. The 2020 Rena features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4L naturally aspirated engine producing maximum power of 95PS (70kW) and maximum torque of 132.4Nm, paired with a 5-speed manual transmission.
14
0
Share

How to Identify Car Gears?

P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport Mode), L (Low Gear). Below is a detailed introduction to car gears: 1. P Gear is the Parking Gear: When the gear lever is in the P position, the transmission is in neutral internally, but the output shaft is mechanically locked. At this time, the car will stop in place even without stepping on the brake, and it is generally used for long-term parking of the car. When engaging the P gear, the car must be completely stationary. Do not engage the P gear when the car is not fully stopped, and always apply the handbrake. When parking on a slope, you need to apply the handbrake first and then engage the P gear. 2. R Gear is the Reverse Gear: When the gear lever is in the R position, the rotation direction of the transmission output shaft is opposite to that of the engine, allowing the car to move backward. When engaging the R gear, the car must be completely stationary. Do not engage the R gear when the car is not fully stopped. 3. N Gear is the Neutral Gear: When the gear lever is in the N position, the gears inside the transmission are in an idle state, and the clutch is not engaged. The load on the transmission is minimal at this time. The N gear is generally used for short-term parking, such as waiting at a red light, and the transmission should also be in the N gear when the car is being towed. 4. D Gear is the Driving Gear: When the gear lever is in the D position, the gears inside the transmission automatically switch between the lowest and highest gears according to the set shifting rules, based on factors such as vehicle speed and throttle opening. In most cases, you can drive using the D gear.
7
0
Share

Are Automatic Transmissions Prone to Failure?

Automatic transmissions do not easily fail during daily use. Here are some relevant details: 1. The internal structure of an automatic transmission is relatively more complex compared to a manual transmission, which means it requires more attention to maintenance during daily use. The primary aspects of maintaining an automatic transmission include ensuring the quality of the lubricating oil and avoiding operation under overload conditions to prevent overheating and aging of internal components. Due to its complex structure, transmission fluid plays an even more critical role. 2. In daily vehicle use, most automatic transmission failures stem from issues with the transmission fluid. Besides lubrication and cooling, automatic transmission fluid also assists in power transfer. If the fluid is not replaced for extended periods, impurities and sludge can accumulate, reducing its lubrication effectiveness and increasing wear on components like gears.
5
4
Share

What to Do When Mercedes-Benz Seat Adjustment Fails?

Reasons for Mercedes-Benz seat adjustment failure: 1. Electric seat jamming or seizing up. The seat adjustment linkage needs lubrication. 2. Wiring issues. Check the fuse first, then inspect if the seat motor is functioning properly. 3. Adjustment linkage or slide rails are blocked or lack lubrication. Automotive seats should meet the following requirements: 1. The arrangement of seats within the entire cabin should be reasonable, especially the driver's seat must be in the optimal position. 2. The seat's design must comply with human physiological functions, ensuring comfort while striving for aesthetics. 3. Seats must be safe and reliable, with sufficient strength, stiffness, and durability, featuring a compact structure and minimizing weight as much as possible. 4. Various adjustment mechanisms designed for passenger comfort must have reliable locking devices to ensure safety.
17
0
Share

Can a sedan be equipped with a roof rack?

Sedans can be equipped with roof racks. The installation method for roof racks is as follows: 1. Choose a suitable roof rack; 2. Thoroughly clean the roof surface. If there are no pre-installed screws on the roof, adhesive-type roof racks can be installed; 3. Find symmetrical and suitable positions, ensuring balance both front-to-back and side-to-side; 4. Slowly peel off the adhesive backing of the roof rack, stick it to the roof, and press firmly for more than 10 minutes to allow the adhesive to bond properly. Precautions for using roof racks include: 1. Ensure cargo is tightly secured or properly fixed on the rack and evenly distributed; 2. Use non-elastic ropes to tie down the luggage; 3. Pay special attention when carrying large items on the roof rack.
20
1
Share

Why Are Car Bumpers Made of Plastic?

The reasons why car bumpers are made of plastic are: 1. Consideration for pedestrian safety; 2. Practical usage considerations; 3. Facilitation of vehicle design and production. The car bumper is a safety device designed to absorb and mitigate external impacts, protecting the vehicle body and passenger safety. Plastic bumpers are manufactured using polyester and polypropylene materials through injection molding. They consist of an outer panel, cushioning material, and a crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed by stamping cold-rolled thin steel sheets (approximately 1.5mm thick) into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is then bolted to the vehicle frame's longitudinal beams, allowing for easy removal when necessary.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.