What type of transmission does the Toyota Corolla use?

2 Answers
LoganLee
07/29/25 8:23am
Corolla Hybrid is equipped with the E-CVT electronic continuously variable transmission system, which is a transmission specially developed and tuned by Toyota for hybrid models. Here are the relevant details: 1. It not only has the transmission function of an ordinary gasoline car's transmission, but can also switch seamlessly between electric and engine drive without any lag. 2. Moreover, this electronic continuously variable transmission system in the Corolla Hybrid does not have complex mechanisms such as clutches, torque converters, or gear shaft sets found in traditional transmission systems. Instead, it is a power distribution mechanism specifically designed for hybrid models. 3. It can distribute the engine power to both the wheels and the generator, and by seamlessly controlling the engine and dual-motor system, it delivers a smooth acceleration experience. 4. During the acceleration phase, the battery provides energy to the motor, which directly transmits the energy to the wheels, while the engine remains inactive. If a steady acceleration state is maintained, the engine will only start when the speed exceeds 55 km/h. This effectively avoids the emissions and efficiency issues of the fuel engine at low to medium speeds, reasonably bypassing the low-efficiency range and allowing the engine, which excels at low-rev high-torque output, to perform optimally.
Was this review help?
19
3
Share
Sean
08/12/25 11:33am
I've been driving a Toyota Corolla for almost five years now, and it's been incredibly smooth for daily commuting. The car mainly uses a CVT transmission, which is a type of continuously variable transmission. It starts smoothly and accelerates without any jerking. I often drive in the city, and the fuel consumption is very low, averaging just over 5 liters per 100 kilometers. Maintenance is simple, with longer intervals between oil changes. The transmission in the Corolla is designed to be quite reliable by Toyota, rarely causing issues, making it suitable for both city and highway driving. If you opt for the hybrid version, it comes with an e-CVT, which combines with an electric motor for better environmental performance and fuel efficiency. In short, if you drive frequently, this type of transmission makes driving much easier and offers good durability, requiring minimal worry.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

Where is the license plate 'Meng F' from?

Meng F is the license plate code for Xing'an League in Inner Mongolia. It covers areas such as Ulanhot, Arxan, Horqin Right Wing Middle Banner, Hulunbuir, Zhalaite, Suolun, Tuquan, and Horqin Right Wing Front Banner. Here is some information about license plates: 1. The English letters on a license plate represent the prefecture-level city code where the vehicle is registered. 2. License plates, commonly known as vehicle plates, are plates attached to the front and rear of a vehicle. They are typically made of aluminum, sheet metal, plastic, or paper, and display the vehicle's registration number, registration area, and other relevant information. 3. License plates serve as a numbering and information registration system for vehicles. Their primary function is to identify the vehicle's registered region and to allow tracking of the vehicle's owner and registration details.
17
5
Share

Does a new car need polishing before crystal coating?

New cars do not require polishing before crystal coating. If the car is brand new and hasn't undergone long-distance transportation or prolonged storage, the paint surface will be smooth without an oxidation layer, making polishing unnecessary before applying the crystal coating. However, if the car has been transported over long distances or stored for an extended period, resulting in a noticeable oxidation layer on the paint, light polishing is required to remove it. This ensures the crystal coating adheres fully to the paint surface for optimal protection. Generally, new cars do not need polishing before crystal coating. More details are as follows: 1. Crystal coating is an upgraded version of car waxing, enhancing the brightness and hardness of the paint to protect it. 2. After crystal coating, owners will notice the paint becomes more transparent and glossy, with increased resistance to scratches and corrosion. 3. Typically, a car won't need waxing for six months after crystal coating. If the paint's brightness diminishes over time or feels rough and less smooth to the touch, consider waxing or reapplying the crystal coating.
9
3
Share

How to Reset the Maintenance Light on Volkswagen Skoda?

Skoda Octavia maintenance light reset method: 1. Turn off the engine. 2. Locate and press and hold the "0.0/SET" button on the dashboard, which is the reset button. 3. Start the engine while still holding down the "0.0/SET" button. 4. After a few seconds, the information display on the dashboard will show messages such as "Confirm to reset the maintenance service data?" or "Confirm to reset the vehicle inspection service data?" At this point, release the "0.0/SET" button. 5. Press the "0.0/SET" (reset/set) button again to confirm. 6. Check if the maintenance light has been reset to zero; if not, repeat the process.
14
5
Share

What are the precautions for using the starter?

Precautions for using the starter: 1. Each starting time should not exceed 5 seconds, and the interval between restarts should be no less than 15 seconds. If the engine fails to start after three consecutive attempts, stop and inspect the engine, and only restart after troubleshooting. 2. If there is a gear grinding noise when starting because the drive gear does not engage with the ring gear, stop starting immediately and restart after the motor stops rotating. 3. Release the button immediately after the engine fires to allow the drive gear to return to its original position. 4. It is strictly prohibited to operate the starter without disengaging the clutch after shifting gears, or to use the starter to drive the vehicle.
11
1
Share

Is the T-Roc equipped with a 1.4T wet dual-clutch transmission?

The T-Roc 1.4T uses a wet dual-clutch transmission. Specifically, the T-Roc 1.4T is equipped with the DQ381 wet dual-clutch transmission. Compared to the DQ380, which is also designed for transverse platforms, the DQ381 not only adds support for all-wheel-drive systems but also significantly improves various performance metrics. Here is some information about dual-clutch transmissions: 1. Dual-clutch transmissions can be mainly divided into dry and wet types. Although they are named differently, their working principles are largely the same. 2. A wet dual-clutch transmission must include a hydraulic pump, lubricating fluid, cooling pipes, and an external cooling system. In contrast, dry dual-clutch transmissions save on these related hydraulic systems, giving them advantages in manufacturing costs, weight reduction, and space optimization.
13
5
Share

What is the difference between P gear and N gear?

The biggest difference between N gear and P gear is that: when N gear is engaged, the car will not stall, but the power is not transmitted to the drive wheels. Although the car will not move, the wheels do not have braking force, which poses a risk of rolling back or moving. On the other hand, when P gear is engaged, the parking brake mechanism inside the transmission locks the output shaft, cutting off the power and providing a certain braking effect. Here is a detailed explanation about N gear and P gear: 1. N (Neutral) gear: N gear is equivalent to the neutral gear in a manual transmission and can be used when starting or towing. When waiting at a signal or in traffic, the gear lever is often kept in D (Drive) position while the brake is pressed. If the stop is very brief, this is acceptable, but for longer stops, it is better to shift into N gear and engage the handbrake. 2. P (Parking) gear: When this gear is engaged, the wheels are mechanically locked to prevent rolling. The vehicle must be completely stopped before using P gear, otherwise the mechanical parts of the automatic transmission may be damaged. Additionally, automatic transmission cars usually have a start switch that allows the engine to start only when the gear is in "P" or "N" to prevent the car from suddenly lurching forward if started in other gears by mistake. The correct steps for parking should be: press the brake - shift to neutral - engage the handbrake - turn off the engine - shift to P gear. P gear mainly locks the power output, serving as a brake assist, while the handbrake is what truly brakes all four wheels.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.