What type of transmission does the Infiniti QX70 use?

1 Answers
LeEli
07/29/25 11:10pm
Infiniti QX70 uses a 7-speed manual-automatic transmission, which has a relatively low failure rate and requires minimal maintenance during daily use. The only regular maintenance needed is timely replacement of the transmission oil. Currently, automotive transmissions on the market are generally divided into manual transmissions and automatic transmissions. Automatic transmissions are typically categorized into manual-automatic transmissions, dual-clutch transmissions, CVT continuously variable transmissions, and AMT transmissions. The Infiniti QX70 is a mid-to-large-sized SUV produced by Infiniti and belongs to the brand's imported models. In terms of power, the Infiniti QX70 is equipped with a 3.7-liter 6-cylinder naturally aspirated engine, delivering a maximum horsepower of 351 hp, a maximum power of 258 kW, and a maximum torque of 363 Nm.
Was this review help?
20
5
Share
More Forum Discussions

Should I use 12V or 24V to charge my car?

Generally speaking, ordinary gasoline cars use 12V, most gasoline vehicles are 12V, while diesel vehicles, trucks, buses and other large vehicles are 24V. Ordinary small diesel vehicles, such as SUVs, sedans, and off-road vehicles, mostly use 12V. Extended content, methods to protect the battery are as follows: 1. Lock the vehicle after turning off the engine: After the car is turned off, promptly turn off lights, audio, and other electrical appliances. For keyless entry and start vehicles, it is also necessary to lock the car to put it into sleep mode to prevent battery drain. 2. Turn off the air conditioning when shutting down: Develop the good habit of turning off the air conditioning when shutting down. Compared to the car's lights, audio, cigarette lighter, and other power-consuming devices, the air conditioning consumes a significant amount of electricity, especially in winter and summer when it is most frequently used. However, many drivers have the bad habit of not turning off the air conditioning when shutting down. If this happens, the air conditioning will automatically start running the next time the car is started, which will result in a high instantaneous power load on the car. 3. Regular inspection and timely charging: If the car is parked for a long time, the negative terminal of the battery should be disconnected. Because for cars that are not used for a long time, the battery's charge will slowly decrease. If the car is needed suddenly, it may cause difficulty in starting the car. Additionally, even if the car is left unused for a long time with the battery disconnected, if the car is used infrequently, it is still necessary to take the car out for a drive every once in a while, or regularly inspect the battery. If the charge is insufficient, charge it in time to keep the battery in a full state, thereby extending the battery's service life.
7
2
Share

What lights should be used when driving straight through an intersection at night?

When passing through an intersection with traffic signals at night, use low beam headlights; when driving straight through an intersection without traffic signals at night, alternate between high and low beam headlights at least twice. Precautions for night driving are as follows: Precautions for overtaking at night: When overtaking at night, turn on the turn signal in advance and observe the vehicles behind. If the following vehicle is too close, it is not recommended to signal and overtake, as this may easily catch the following vehicle off guard. Methods for using lights when driving at night: When driving at night without street lights, poor lighting, or encountering low visibility conditions such as fog, rain, snow, dust, or hail, vehicles should turn on headlights, clearance lights, and tail lights, but should not use high beams when following another vehicle.
17
0
Share

What Causes the Engine Idle to Sound Like a Tractor?

Engine shaking and sounding like a tractor is a phenomenon called "engine backfire." Engine backfire occurs when, after the piston completes its work in the cylinder, the exhaust gases from combustion should exit through the exhaust pipe. However, due to some malfunction, the exhaust valve closes, preventing the gases from escaping or not allowing enough time for them to exit. As a result, the exhaust gases are forced out through other parts such as individual cylinders in the cylinder head, the crankcase, the carburetor, or the throttle valve, commonly referred to as "backflow" or engine backfire. Here are the common causes of engine backfire: 1. Overly Lean Air-Fuel Mixture: Possible causes include faults in the fuel system or intake system: Fuel system issues are mainly due to insufficient fuel injection by the injector, which can be caused by low fuel pressure or a clogged injector. Intake system faults are primarily due to excessive air intake, which can result from a malfunctioning sensor that controls air intake or a leak in the intake manifold. 2. Ignition System Problems: Mainly insufficient ignition energy (excessive resistance in high-voltage wires; damaged ignition coil; insufficient power supply voltage) or faulty spark plugs. 3. Excessive Ignition Timing Advance: Causes include improper CKP (crankshaft position sensor) gap; loose CKP; damaged temperature sensor; engine load; or a faulty ECU. 4. Excessive Deviation from Correct Ignition Timing: Symptoms: If the engine exhibits both backfire and loud popping noises, it is often due to incorrectly connected high-voltage wires for the cylinders. If the symptoms are less severe but occur intermittently and seemingly with a pattern, it is usually caused by cracks in the distributor cap, leading to cross-firing between cylinders.
17
4
Share

What causes the exclamation mark on the Hyundai Mistra's reversing radar?

There are five possible scenarios when an exclamation mark appears on the car's dashboard: general malfunction, automatic transmission failure, brake system failure, abnormal tire pressure, and lighting malfunction. Below is a detailed analysis of these five situations: General malfunction: A triangle with an exclamation mark inside indicates a general performance or component malfunction in the car. This could include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the problem. Automatic transmission failure: A yellow gear with an exclamation mark inside is the automatic transmission failure warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. Transmission oil should be replaced promptly. Brake system failure: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, primarily indicating brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Abnormal tire pressure: A horizontal line under parentheses with an exclamation mark in the middle represents the tire pressure monitoring warning light. This light will illuminate when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting malfunction: A yellow bulb with an exclamation mark is the lighting malfunction indicator, signaling a fault in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
5
1
Share

What are the differences between Porsche 718 and 911?

The differences between Porsche 718 and 911 are as follows: 1. Luggage compartment location: 1. Porsche 718: It has both front and rear luggage compartments. 2. Porsche 911: The luggage compartment is located at the front of the car. 2. Power aspects: 1. Porsche 718: Equipped with 2.0T and 2.5T engines, achieving 0-100 km/h acceleration in 5.6 seconds and 4.4 seconds respectively, with power outputs of 250 horsepower and 350 horsepower. 2. Porsche 911: The Porsche 911 series is divided into Carrera series, Targa series, Turbo series, Turbo-S series, and GT series, equipped with 3.0T, 3.8T, and 4.0L engines, achieving 0-100 km/h acceleration in 3.2 seconds.
2
5
Share

What is the difference between Toyota A25A and A25C engines?

Toyota A25A and A25C engines have the following differences: 1. Version difference A25A represents Toyota's TNGA 2.5L engine, which is imported from Japan; the A25C engine is the domestically produced version. 2. Assembly difference A25A is imported as a complete engine assembly from Japan, fully assembled there before shipment; A25C involves importing all necessary engine parts from Japan, with assembly taking place at GAC Group's factory. Advantages of these two engines: Both A25A and A25C engines feature new technology that allows free switching between Otto cycle and Atkinson cycle systems, giving this internal combustion engine a compression ratio of (13:1). In terms of new technology and power performance, the 2.5L engine delivers 151KW (205 horsepower) with 240nM torque, providing strong and dynamic power for the new vehicle.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.