What type of tires does the BYD Surui use?

What Causes Vehicle Authentication Failure and Failure to Start?

Engine authentication failure leading to failure to start may be due to a dead key fob battery, a malfunction in the push-button start function, or faults in the body control module or circuitry. It is recommended to contact your local 4S dealership for inspection and repair. Below are the relevant details: Items to check: (1) Verify whether the anti-theft system is locked. (2) Determine if the starting system is functioning (whether the starter motor is operating). (3) If the starting system is normal, check if the ignition system is functioning properly; if the starting system is abnormal (e.g., slow cranking), inspect the battery voltage, starter motor for faults, or excessive engine resistance; if the starter motor does not operate, examine the starter motor's circuit and solenoid switch. (4) Check if the fuel supply system is functioning correctly.

19

3

Share

Can the Vehicle License Annual Inspection Be Processed Online?

Vehicle license annual inspection cannot be processed online. Additional information: 1. 6-year exemption vehicles: Vehicles eligible for the 6-year exemption, without major accidents, can be exempted from online vehicle inspection. However, the annual inspection label must be collected from the vehicle management office every two years. Required documents for inspection include ID card, vehicle license, and valid insurance policy. 2. Required documents: For vehicles requiring annual inspection, prepare the original driver's license, original vehicle license, original ID card and one copy, duplicate of compulsory traffic insurance, and environmental compliance certificate. After passing the on-site inspection at the vehicle management office, the annual inspection label will be issued. 3. Early inspection: Annual inspection can be conducted up to three months in advance at the vehicle management office. Applications can be submitted within three months before the deadline. It is recommended to complete the inspection two months or slightly more in advance, rather than waiting until just a few days before the expiration date.

15

5

Share

How to Adjust the Time on Volkswagen Dashboard?

The left button on the dashboard adjusts the hour, while the right button adjusts the minute. Press the left button, wait for the trip computer's time to flash, then press the right SET button. Pressing SET once adjusts the time by one increment, while holding the SET button causes the time digits to change rapidly. Coordinate the use of both buttons to adjust the time. Below is related information about dashboard warning lights: 1. Brake System Warning Light: If this light illuminates while driving, it indicates low brake fluid level in the reservoir or a malfunction in the braking system. Immediate inspection is required. 2. Low Oil Pressure Indicator: If this light comes on, it may indicate critically low oil pressure. Stop driving immediately, turn off the engine, and check the engine oil level.

15

1

Share

How to Remove Oxidation Layer from a Car?

Methods to remove the oxidation layer from car paint include: repainting, waxing, glazing, and coating. The causes of oxidation layer formation are: 1. Increasing chemical substances: The rising chemical substances in the air oxidize the car paint surface. 2. UV exposure: Acid rain and UV radiation during hot weather. 3. Dust accumulation: Prolonged dust attachment. Introduction to car paint: Car paint refers to the coating applied to the car's surface, aimed at preserving the paint's gloss and providing a physical protective layer to safeguard the paint surface.

17

2

Share

How to Cancel the Overspeed Alarm in Mercedes-Benz?

Mercedes-Benz overspeed alarm can be canceled through the central control screen. Below is detailed information about the Mercedes-Benz overspeed alarm: 1. Related Models: Mercedes-Benz is the oldest automobile manufacturer in the world, renowned for producing high-quality, high-performance luxury vehicles. It is also one of the top ten automobile companies globally, ranking as the largest automobile company in Germany by sales revenue and the second by sales volume. 2. Function: The vehicle overspeed alarm is designed to ensure driving safety. However, speed control can also be achieved by setting a speed limiter to avoid overspeeding. When the vehicle reaches or exceeds the preset maximum speed during operation, the system will adjust the throttle to reduce the speed.

14

2

Share

What is the method for changing transmission oil in a 2017 Honda CR-V?

Honda CR-V transmission oil replacement methods: 1. Gravity Drain: The process is similar to changing engine oil. Loosen the drain bolt at the bottom of the oil pan and allow the transmission fluid to flow out under gravity. This is the most common and easiest method, but it cannot completely drain all the transmission fluid. Residual fluid tends to remain in uneven or hard-to-reach areas. 2. Machine Flush: New transmission fluid is added to a flushing machine, which connects to the transmission's fluid lines. The machine functions by pushing new fluid in to displace the old fluid, achieving a complete replacement. This method provides a more thorough cleaning of the fluid passages. The more new fluid used, the cleaner the system becomes. A machine flush typically requires about 10-13 liters of transmission fluid and takes approximately one hour. 3. Oil Pan Removal Method: This approach involves removing the oil pan for a thorough cleaning and replacement, and also allows for cleaning or replacing the dirty transmission filter.

6

1

Share

What type of tires does the BYD Surui use?

What Causes Vehicle Authentication Failure and Failure to Start?

Can the Vehicle License Annual Inspection Be Processed Online?

How to Adjust the Time on Volkswagen Dashboard?

How to Remove Oxidation Layer from a Car?

How to Cancel the Overspeed Alarm in Mercedes-Benz?

What is the method for changing transmission oil in a 2017 Honda CR-V?

How to Check If the Compulsory Traffic Insurance of a Used Car Has Expired?

How to Use a Slipper Clutch?

How many factories does BYD have?

How to distinguish cylinders 1, 2, and 3 in a V6 Teana?