What type of suspension does the Volkswagen T-Roc use?

1 Answers
AylaAnn
07/30/25 3:21am
The Volkswagen T-Roc uses a MacPherson strut independent suspension in the front and a multi-link independent suspension in the rear. The T-Roc is positioned as a compact SUV, and the suspension types used are well-suited for this vehicle category. The suspension system in automobiles supports the vehicle's weight via coil springs and employs shock absorbers with damping to reduce bumps and vibrations during driving. The T-Roc is equipped with Alcantara material seats, a panoramic sunroof, an electric tailgate, a BeatsAudio sound system, a 10.3-inch Active Info Display full LCD instrument panel, and also offers various active and passive safety features such as frontal collision warning.
Was this review help?
3
2
Share
More Forum Discussions

What is the reason why the Baojun 730 suddenly cannot engage reverse gear?

The reason why the Baojun 730 cannot engage reverse gear is that the car temperature is low, and the transmission oil is not fully lubricated; it is difficult to shift gears while moving, and the vehicle speed and gear do not match; first gear and reverse gear do not have synchronizers. Definition of reverse gear: Reverse gear, fully known as the reverse driving gear, is one of the three standard gears of a car, marked as R on the gear console, with the purpose of enabling the vehicle to move backward, belonging to a special driving gear. The solutions for not being able to engage reverse gear are: Try to engage reverse gear when the vehicle is stationary. If the transmission makes a clicking sound of gear collision during the process, it means that the clutch of the vehicle is not completely separated. After repairing the clutch, the fault can be eliminated; if reverse gear engages smoothly, but first gear is difficult to engage, it is recommended to go to a specialized repair shop to adjust the gear position and change the transmission oil, and the fault can also be eliminated.
9
2
Share

How many seconds does a turn signal flash once?

If the turn signal clicks three times, it corresponds to three seconds in time. This is because the normal flashing frequency of the turn signal relay is approximately 1 Hertz, meaning 60 times per minute, or about one flash per second. If the frequency suddenly increases, it might indicate a fault in one side of the turn signal or its circuit. Operation method of the turn signal: Generally, the turn signal switch in most vehicles is installed on the left side of the steering wheel. The operation can be summarized as "up for right, down for left"—pushing the lever upward (clockwise) signals a right turn, while pushing it downward (counterclockwise) signals a left turn. However, with advancements in automotive technology, many modern vehicles now feature a "one-touch triple flash" quick function on the hazard light switch. The driver only needs to lightly "tap" the lever, and the turn signal will flash three times before automatically turning off. This feature eliminates the hassle of manually turning off the turn signal when changing lanes or overtaking.
9
3
Share

Where to place the car refrigerator in Audi A4L?

Generally, car refrigerators are placed in the trunk of the car to avoid occupying passenger seats. Requirements for placing a car refrigerator: Nearby power source—12V/24V power supply with sufficient ventilation space. Possible locations for a car refrigerator: When placed in the trunk, it is recommended to install a cigarette lighter socket in the trunk and connect the refrigerator to the cigarette lighter using a power cord for power supply. Car refrigerators can also be adapted to different vehicle models and come in various sizes. For example, a small 12L refrigerator can easily fit on the front passenger seat and be secured in place. Alternatively, it can be placed on the rear seats, but proper fixation is necessary to prevent the refrigerator from tipping over due to sudden braking inertia. There are also car refrigerators designed for the armrest console, with a capacity of about 6L, which can be embedded into the driver's seat armrest console, allowing easy access to the refrigerator lid for convenient storage and retrieval of items.
1
5
Share

What are the speed limits for the high and low lanes on a two-lane highway?

Two-lane highways have speed limits ranging from 100 to 120. Speed limits for two-lane highways: For a two-lane highway in the same direction, the rightmost lane is the emergency lane and cannot be used under normal circumstances. Therefore, driving is only permitted in the left and right travel lanes. According to China's Road Traffic Safety Law, the speed limit for the leftmost lane on a two-lane highway is 100-120. Speed limits for three-lane highways: For highways with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 kilometers per hour, the minimum speed for the middle lane is 90 kilometers per hour, and the deceleration lane speed should not exceed 50 kilometers per hour. If the speed limit indicated by road signs differs from the above lane speed regulations, drivers should follow the speed limit indicated by the road signs.
7
2
Share

What are the differences between Porsche Macan and Cayenne?

There are three main differences between the Macan and Cayenne: Positioning: The Porsche Macan is positioned as a mid-size SUV, while the Cayenne is positioned as a mid-to-large-size SUV. Powertrain: The Porsche Macan is equipped with 2.0T, 2.9T, and 3.0T engines, while the Cayenne comes with 2.9T, 3.0T, and 4.0T engines. The Macan is paired with a 7-speed dual-clutch transmission, whereas the Cayenne uses an 8-speed automatic transmission. Body Dimensions: The Cayenne is larger than the Macan. The Macan's dimensions are 4696mm in length, 1923mm in width, and 1624mm in height, with a wheelbase of 2807mm. In contrast, the Cayenne measures 4918mm in length, 1983mm in width, and 1696mm in height, with a wheelbase of 2895mm.
8
5
Share

What Causes the Turn Signal to Stay On Without Flashing?

Turn signal staying on without flashing is usually caused by a faulty relay. The solution is to replace the fuse inside the relay. It may also be due to a loose connection in the wiring, which requires inspection and can be done at a repair shop. The two wires of the flasher have polarity; if they are connected in reverse, the light will stay on without flashing. In this case, simply swap the two wires of the flasher. Introduction to Turn Signals: Turn signals are important indicator lights that are activated when a motor vehicle is turning, alerting surrounding vehicles and pedestrians. How Turn Signals Work: Turn signal bulbs use xenon tubes, controlled by a microcontroller circuit, alternating left and right with continuous flashing. The turn signal employs a flasher to achieve the blinking effect. Types of Turn Signals: Turn signals can mainly be divided into three types: resistance wire type, capacitor type, and electronic type.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.