What type of suspension does the Song New Energy use?

How to Turn Off the Mercedes-Benz One-Button Start-Stop Function?

The method to turn off the Mercedes-Benz one-button start-stop function is: simply press the one-button start-stop button located next to the gear shift lever on the center console. Mercedes-Benz models include: Mercedes-Benz E260L, Mercedes-Benz S400L, Mercedes-Benz A180, Mercedes-Benz V260, Mercedes-Benz E300L, etc. Taking the 2021 Mercedes-Benz E260L as an example, it is a mid-to-large-sized sedan with body dimensions of: length 5078mm, width 1860mm, height 1484mm, and a wheelbase of 3079mm. The 2021 Mercedes-Benz E260L features multi-link independent suspension both at the front and rear, with a rear-wheel drive layout.

6

5

Share

What is the 0-100 km/h acceleration time for the Toyota Reiz?

Toyota Reiz's 0-100 km/h acceleration time varies depending on the engine displacement: 1. The model with a 3.0L engine achieves it in 7.8 seconds; 2. The model with a 2.5L engine completes it in 9.0 seconds. The 0-100 km/h acceleration time refers to the duration it takes for a vehicle to accelerate from 0 to 100 km per hour, serving as a direct indicator of the car's power. Various factors such as ambient temperature, road conditions, vehicle wear, and even the amount of remaining fuel in the tank can influence the test results. Taking the 2013 Toyota Reiz Jingrui Edition as an example, its body dimensions are: length 4750mm, width 1795mm, height 1450mm, wheelbase 2850mm, fuel tank capacity 70L, trunk capacity 480L, and curb weight 1520kg.

7

3

Share

What are the solutions for brake failure?

The solutions for brake failure are: 1. Release the accelerator pedal; 2. Shift the gear to manual mode and manually downshift from high gear to low gear sequentially; 3. When pulling the handbrake, hold the release button and pull the handbrake intermittently, do not pull it to the locked position; 4. After the vehicle stops, shift into the parking gear. The signs before brake failure are: 1. A feeling of weakness when stepping on the brake; 2. Deviation occurs when stepping on the brake; 3. The brake becomes soft when stepping on it; 4. Abnormal noise occurs when stepping on the brake; 5. The brake pedal does not return after stepping on it and there is no resistance felt when stepping on it. The brake system consists of a vacuum booster pump, master cylinder, wheel cylinder, brake pads, and brake discs.

19

0

Share

What is the principle of the fuel nozzle auto-shutoff?

The principle of the fuel nozzle auto-shutoff is: when the fuel tank is full, the air vent of the nozzle gets blocked, creating a negative pressure inside the nozzle's self-control membrane. This, in turn, causes the ball bearing and switch to disengage the nozzle's support plate, leading to the valve closing and the nozzle auto-sealing, resulting in the auto-shutoff. The reasons for the fuel nozzle auto-shutoff are: 1. Blockage or poor fuel flow in the fuel line; 2. The vent pipe next to the fuel filler neck is blocked or deformed; 3. High pressure inside the fuel tank due to hot weather, causing fuel to splash out easily during refueling; 4. Relatively fast refueling speed, leading to fuel splashing and triggering the auto-shutoff; 5. The fuel pipe structure in the fuel tank is too tortuous.

16

1

Share

How to Reset the BMW Tire Pressure Warning Light?

The method to reset the BMW tire pressure warning light is: After restoring the air pressure of all four tires to the standard level, press and hold the tire pressure reset button located next to the gear lever to deactivate the warning light. BMW models include: BMW 3 Series, BMW 7 Series, BMW X5, BMW X1, BMW 1 Series, etc. Taking the 2019 BMW 7 Series as an example, its body structure is a 4-door, 5-seater sedan with dimensions of: length 5273mm, width 1902mm, height 1498mm, a wheelbase of 3210mm, a minimum ground clearance of 120mm, a fuel tank capacity of 78 liters, and a curb weight of 1911kg.

20

1

Share

How Many Kilometers Does a Motorcycle Need to Clean the Carburetor?

Motorcycles need to clean the carburetor every 7,000 kilometers. Carburetor Classification: Carburetors are divided into simple carburetors and complex carburetors. Carburetors can also be classified as downdraft and sidedraft. Based on the throttle type, carburetors can be further categorized as rotary or lift-type. The rotary throttle involves a disc-shaped throttle that rotates around an axis between the carburetor throat and the intake pipe, adjusting the airflow area of the intake passage. Basic Structure of a Carburetor: A simple carburetor consists of three parts: upper, middle, and lower. The upper part includes the air intake and float chamber, the middle part contains the throat, jet, and nozzle, and the lower part includes the throttle, among other components. The float chamber is a rectangular container that stores fuel from the fuel pump, with a float inside that controls the fuel intake based on the fuel level height. The nozzle in the middle section has one end connected to the jet in the float chamber and the other end positioned at the throat of the carburetor.

19

5

Share

What type of suspension does the Song New Energy use?

How to Turn Off the Mercedes-Benz One-Button Start-Stop Function?

What is the 0-100 km/h acceleration time for the Toyota Reiz?

What are the solutions for brake failure?

What is the principle of the fuel nozzle auto-shutoff?

How to Reset the BMW Tire Pressure Warning Light?

How Many Kilometers Does a Motorcycle Need to Clean the Carburetor?

How to Adjust the Time on Wuling Hongguang?

What does the ECO light on the dashboard mean?

Which country does Tata belong to?

What Are the Solutions for Foggy Car Windshield?