What type of suspension does the Edge use?

How to Use the Heater in Changan 55

To use the heater in the Changan CS55, turn on the air conditioning and then adjust the temperature knob. Rotate it clockwise or counterclockwise to control the fan speed: clockwise (increase) and counterclockwise (decrease). Below are the methods for adjusting the air conditioning cooling and heating in the Changan CS55: 1. The fan speed is the main switch. If the fan is turned off, turning on the AC will have no effect. 2. If the fan is on but the AC is off, it will only blow air without cooling, but it can provide heating, which does not consume fuel. 3. If both the fan and AC are on, it will cool the air. If you increase the temperature, warm air will be added to raise the temperature slightly, but cooling will continue. This state of simultaneous cooling and heating is suitable for cold and humid weather, as it helps to increase the temperature while removing humidity.

6

2

Share

Where is the spare tire located on the Chevrolet Equinox?

The spare tire of the Equinox is located under the trunk floor panel. Open the trunk, lift the trunk floor panel, remove the foam tool kit on the rear seat, unscrew the locking knob of the spare tire, and then you can take out the spare tire. Relevant information is as follows: 1. Vehicle spare tires are divided into full-size spare tires and non-full-size spare tires. 2. The Equinox features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169ps, a maximum power of 124kw, and a maximum torque of 250nm. It is paired with a 6-speed automatic transmission. The vehicle dimensions are: length 4646mm, width 1843mm, height 1684mm, with a wheelbase of 2725mm.

15

4

Share

Is the Rapid Fuel-Efficient?

The Rapid is not fuel-inefficient. It utilizes the new EA211 engine paired with a new transmission, which together deliver excellent fuel efficiency, even achieving a fuel consumption of 5.5L per 100km (manual transmission). Below are the detailed specifications of the Rapid: 1. In terms of exterior design, the Rapid features a stylish, dynamic, and clean aesthetic with high practicality. Its body dimensions are 4512x1706x1469mm (LxWxH) with a wheelbase of 2603mm, ensuring ample interior space. 2. The interior adopts a family-style design, with a simple yet functional and aesthetically pleasing dashboard, equipped with features including cornering lights, start-stop system, rain-sensing wipers, daytime running lights, rear parking sensors, Bluetooth system, hill-start assist, and ESC stability control. 4. Under the hood, the Rapid is powered by a 1.5L inline 4-cylinder naturally aspirated engine, delivering a maximum power of 81kW and peak torque of 150Nm, mated to a 6-speed automatic transmission. The suspension setup consists of a front MacPherson strut and a rear torsion beam non-independent suspension.

7

3

Share

What is the fuel consumption of the CR-V?

The official combined fuel consumption of the Honda CR-V is 6.2-6.7L/100km. However, the actual fuel consumption is influenced by driving habits, techniques, road conditions, climate, and other factors. Based on real-world driving tests, the actual urban fuel consumption can range from 7.5-8.5L/100km. Below are some fuel-saving tips: 1. The initial acceleration at low speeds is a peak fuel consumption period, so gently pressing the throttle during startup and avoiding excessively high RPM can effectively reduce fuel consumption. 2. Pay attention to improving your "footwork"—avoid unnecessary high RPMs, as fluctuating engine speeds can significantly increase fuel consumption. 3. Perform regular maintenance, including oil changes and carbon deposit removal. 4. Try to avoid sudden braking. Anticipating road conditions in advance not only enhances driving safety but also saves fuel—for example, gradually slowing down before traffic lights and utilizing inertia to coast.

18

5

Share

Is it mandatory to use 95 octane gasoline for the Lynk & Co 03?

It is not mandatory to use 95 octane gasoline, but the Lynk & Co 03 requires a minimum of 95 octane fuel as all models are equipped with turbocharged engines. Below is additional information about the Lynk & Co 03: 1. The Lynk & Co 03 is equipped with two types of engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine, coded as JLH-3G15TDC, has a maximum power output of 115 kW, a maximum torque of 245 Nm, a maximum power speed of 5,000 rpm, and a maximum torque range from 1,450 to 4,000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a 7-speed dual-clutch transmission. 2. The 2.0-liter turbocharged engine has a maximum power output of 140 kW, a maximum torque of 300 Nm, a maximum power speed of 4,700 rpm, and a maximum torque range from 1,400 to 4,000 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed automatic transmission.

10

5

Share

How to Remove the Blower of Peugeot 308?

The method to remove the blower of Peugeot 308 is: first remove the three decorative panels on the center console, then dismantle the air conditioning blower, unscrew the fixing screws of the blower, and rotate the blower clockwise with force to remove it. The following are relevant information: 1. The blower of Peugeot 308 is located in front of the co-pilot seat. If you remove it by yourself, the workload is relatively large, requiring someone to assist in completing it, and there are many accessories to be removed. 2. The blower is mainly composed of six parts: motor, air filter, blower body, air chamber, base, and oil drip nozzle. The blower operates eccentrically by the offset rotor in the cylinder, and the volume change between the blades in the rotor groove sucks, compresses, and discharges the air. 3. During operation, the pressure difference of the blower is used to automatically deliver lubrication to the oil drip nozzle, which drips into the cylinder to reduce friction and noise. At the same time, it can keep the gas in the cylinder from flowing back. This type of blower is also called a sliding vane blower.

7

3

Share

What type of suspension does the Edge use?

How to Use the Heater in Changan 55

Where is the spare tire located on the Chevrolet Equinox?

Is the Rapid Fuel-Efficient?

What is the fuel consumption of the CR-V?

Is it mandatory to use 95 octane gasoline for the Lynk & Co 03?

How to Remove the Blower of Peugeot 308?

What are the main hidden features of BMW?

Why was the Audi A1 discontinued?

How to Use the Air Recirculation and Fresh Air Mode in Audi A3?

What is the method to reset the maintenance light on the 3008?