What type of oil should be used for the Excelle?

Where is the Toolbox Located in a BMW 5 Series?

BMW 5 Series Toolbox is located under the trunk lid or beneath the front passenger seat. BMW 5 Series: The BMW 5 Series is a mid-size luxury sedan produced by BMW. The long-wheelbase version of the BMW 5 Series has body dimensions of 5087mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3108mm. The 2020 domestic BMW 5 Series is equipped with either a low-power 2.0-liter turbocharged engine or a high-power 2.0-liter turbocharged engine. BMW 5 Series Powertrain: The domestic BMW 5 Series utilizes two types of engines: a low-power 2.0-liter turbocharged engine and a high-power 2.0-liter turbocharged engine.

5

4

Share

What transmission does the new Kia KX5 use?

The new Kia KX5 is equipped with either an automatic transmission (AT) or a dry dual-clutch transmission (DCT). Functions of transmission: Changing the transmission ratio to expand the range of torque and speed variation of the driving wheels; enabling the vehicle to reverse while maintaining the same engine rotation direction. Also known as a gearbox, the transmission is a mechanism used to alter the speed and torque from the engine, capable of fixing or changing the transmission ratio between the output shaft and input shaft in different gears. Classification of transmissions: Stepped transmissions use gear drives with several fixed transmission ratios; continuously variable transmissions (CVT) can obtain any transmission ratio within the speed range continuously; integrated transmissions refer to hydromechanical transmissions composed of a torque converter and a geared stepped transmission.

7

1

Share

How to Deal with Jaguar XJ Suspension Failure?

Suspension failure may manifest as abnormal suspension noise, front wheel wobbling or deviation, noise from the suspension universal joint drive shaft, excessive body roll caused by the suspension, heavy steering, or poor steering wheel return. It is necessary to conduct a step-by-step inspection to identify the fault. Automobile Suspension System: The suspension system refers to the entire support system composed of springs and shock absorbers between the body and the tires. The functions of the suspension system are to support the body and improve ride comfort. Different suspension settings will provide drivers with different driving experiences. Troubleshooting Methods: First, check the air suspension system's air reservoir. The air reservoir maintains stable air pressure in the air suspension system. Carefully inspect its exterior for damage and air leaks. Next, check the distribution valve connected to the air reservoir. The distribution valve is equipped with a pressure sensor to monitor system pressure. Then, inspect the connection of the distribution valve pipes and use foam to check the air pipe joints on the distribution valve for any leaks.

20

0

Share

Why Does the Audi Brake Pad Make Noise?

Audi brake pad noise is caused by not polishing the old brake disc or issues with the brake pad material. Not polishing the old brake disc: When installing new brake pads, if the old brake disc is not polished, it can lead to improper installation. If the installation is improper or new pads are installed without polishing the old disc, the new pads will directly rub against the uneven surface of the old disc, resulting in uneven wear of the new brake pads. In fact, 90% of noise issues are caused this way. Solution: First, polish the edges of the brake pads to ensure they do not rub against the brake disc, which will eliminate the noise. If this doesn't work, the brake disc must be polished and smoothed using a brake disc repair machine to solve the problem. Brake pad material issues: If the brake pad material contains large particles, it can easily cause noise during braking. The solution is to replace the brake pads with better-quality ones, such as ceramic brake pads.

13

0

Share

Can a 26-ton three-axle truck drive on the highway?

No, it cannot drive on the highway. According to the "Regulations on the Administration of Over-Limit Transport Vehicles Driving on Highways," the weight limit for a three-axle truck on the highway is 25 tons, while the limit for a three-axle articulated vehicle is 27 tons. The load capacity of a three-axle articulated vehicle is significantly higher than that of a three-axle truck, and its length is also much greater. The toll standard for three-axle vehicles on highways is based on weight. The specific calculation method is as follows: For vehicles weighing between 10 to 20 tons, the fee rate decreases linearly from the standard rate to 5/6 of the standard rate. For vehicles weighing between 20 to 40 tons (inclusive), the fee rate for the first 10 tons or less is charged at the standard rate. For the portion between 10 to 40 tons, the fee rate decreases linearly from the standard rate to 30% of the standard rate. For vehicles exceeding 40 tons, the first 10 tons or less are charged at the standard rate, while the portion exceeding 10 tons is charged at 30% of the standard rate. Relevant provisions of the "Regulations on the Administration of Over-Limit Transport Vehicles Driving on Highways": Over-limit transport vehicles carrying divisible loads (referred to as illegal over-limit transport) are prohibited from driving on highways. Vehicles whose overall dimensions or total mass do not exceed the limits specified in Article 3 of these regulations but exceed the load, height, width, or length restrictions of specific highways, bridges, or tunnels are not allowed to drive on those roads, bridges, or tunnels. Freight origin units and road transport enterprises should strengthen education and management of freight vehicle drivers, urging them to comply with legal transport requirements. Road transport enterprises are the primary entities responsible for preventing illegal over-limit transport and must monitor the entire process of vehicle loading and operation in accordance with relevant regulations to prevent drivers from engaging in illegal over-limit transport.

7

4

Share

Where is the engine control module located in the BMW 5 Series F18?

BMW 5 Series F18 airbag control module is located under the hood, near the right side of the engine compartment. BMW 5 Series: The BMW 5 Series is a mid-size luxury sedan under the BMW brand. The dimensions of the long-wheelbase version of the BMW 5 Series are 5087mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3108mm. The 2020 domestically produced BMW 5 Series is equipped with either a low-power version or a high-power version of a 2.0-liter turbocharged engine. Automotive Control Module The automotive control module is an electronic device that automatically processes input signals from various sensors according to a predetermined program and then outputs signals to actuators to control the operation of the vehicle.

5

3

Share

What type of oil should be used for the Excelle?

Where is the Toolbox Located in a BMW 5 Series?

What transmission does the new Kia KX5 use?

How to Deal with Jaguar XJ Suspension Failure?

Why Does the Audi Brake Pad Make Noise?

Can a 26-ton three-axle truck drive on the highway?

Where is the engine control module located in the BMW 5 Series F18?

What is the fuel consumption per 100 kilometers for the new Alto?

Where is the fuel filter of the Venucia T70 located?

Why is the paint peeling on the Mercedes-Benz C steering wheel?

Where is the reset button on the Audi TT?