What Type of Oil Should Be Used for Audi China VI Vehicles?

1 Answers
ArcherLynn
07/29/25 9:36pm
China VI vehicles do not have strict requirements for gasoline, but it is advisable to choose low-ash oil. Low-ash: Low-ash oil contains relatively low levels of ash. Currently, the latest SP-grade oil on the market is very suitable for China VI vehicles. This type of oil can effectively reduce the probability of the particulate filter becoming clogged. Oil viscosity: You can find out what grade of oil should be used by referring to the vehicle's manual. The oil grade recommended in the manual is the safest option. Generally, oil viscosity is indicated by symbols such as 5W30 or 0W20. The number before the W indicates the oil's resistance to low temperatures, while the number after the W indicates viscosity—the smaller the number, the lower the viscosity.
Was this review help?
20
3
Share
More Forum Discussions

Is the Tire Pressure Monitoring System of the Boyue Accurate?

The tire pressure monitoring system of the Boyue is accurate. The working principle of the tire pressure monitoring system is: it uses the sensing function of ABS to compare the number of rotations of the tires. A tire with insufficient pressure will have a shorter circumference, and if one of the four tires has insufficient pressure, its number of rotations will differ from the others while driving. The dimensions of the Boyue are: length 4519mm, width 1831mm, height 1694mm, with a wheelbase of 2670mm and a fuel tank capacity of 58 liters. The Boyue is equipped with a 1.8T turbocharged engine, with a maximum power of 120 kW, a maximum power speed of 5500 rpm, a maximum torque of 250 Nm, and a maximum torque speed range of 1500 to 4500 rpm. It is paired with a 6-speed manual transmission.
17
2
Share

Can a water-damaged car key be repaired?

Car keys that have been damaged by water can be repaired. A car key is a control system composed of three receivers: a transmitter, a remote central locking control module, and a driving authorization system control module, along with related wiring harnesses. Precautions for using car keys include: 1. Avoid contact with metal objects; 2. Do not store them with electronic devices; 3. Do not leave spare keys inside the car; 4. Avoid rough handling. Methods to address water damage in car keys are: 1. Use a hair dryer on the cold setting to dry the key—avoid using hot air; 2. Dry the surface of the key, open the casing, remove the battery, wipe internal components with a tissue, and clean internal buttons with anhydrous alcohol; 3. Do not start the vehicle to prevent water from seeping into deeper layers.
13
4
Share

Why did the warning light suddenly come on?

The reasons why the warning light suddenly comes on are: 1. When the water temperature, crankshaft position, air flow, intake temperature, or oxygen sensor is damaged, has poor contact, or signal interruption; 2. Irregular maintenance and poor driving habits can increase the burden on engine operation; 3. Failure to add the required grade of gasoline can cause engine wear; 4. Poor combustion of the air-fuel mixture; 5. Impact during driving, tampering with a certain engine connector, or temporary signal interruption in the ECU. Warning lights include: 1. Engine fault warning light; 2. Low oil pressure warning light; 3. Water temperature warning light; 4. Brake system fault light; 5. ABS system fault light; 6. Seat belt indicator light; 7. Airbag fault light; 8. Power steering warning light; 9. Tire pressure warning light.
7
1
Share

How long can the payment of motorcycle insurance be delayed after expiration?

Vehicle compulsory insurance can be delayed for up to 3 months for payment. The payment can be delayed, as long as the original auto insurance company can still accept renewal within 3 months. However, according to regulations, vehicles without compulsory insurance are not allowed on the road. Below is relevant information about compulsory insurance: Introduction: The full name of compulsory insurance is "Motor Vehicle Traffic Accident Liability Compulsory Insurance," which is China's first compulsory insurance system implemented by national law. Its premium is subject to a nationwide unified charging standard, stipulated by the state, but the price of compulsory insurance varies for different car models, with the main influencing factor being the "number of car seats." Claims: The compulsory liability insurance referred to in these regulations means that the insurance company compensates for personal injury, death, or property loss of victims other than the vehicle's personnel and the insured within the liability limits in the event of a road traffic accident caused by the insured motor vehicle.
15
4
Share

What does motorcycle ECU mean?

Motorcycle ECU (Electronic-Control-Unit) is the electronic control unit, also known as "on-board computer" or "vehicle computer", which is generally used in fuel-injected motorcycles to control the ignition program. The following is the relevant introduction of ECU: 1. The working voltage range of ECU is generally 6.5 to 16V (with voltage stabilizing device in key internal parts), the working current is 0.015 to 0.1A, and the working temperature is -40℃ to 80℃. It can withstand vibration below 1000Hz, so the probability of ECU damage is very small. 2. In the ECU, the CPU is the core part, which has the function of operation and control. When the engine is running, it collects the signals of each sensor, performs operations, and converts the operation results into control signals to control the work of the controlled object.
11
2
Share

What system does the highway ETC represent?

Highway ETC (Electronic Toll Collection) translates to electronic toll collection, which is a non-stop toll collection system. On highways, there will be one or more ETC lanes. ETC charging method: Through the dedicated short-range microwave communication between the on-board RFID tag installed on the vehicle's windshield and the microwave antenna on the ETC lane of the toll station, the application of software networking technology is used to conduct back-end settlement processing with the bank, thereby achieving the purpose of vehicles passing through bridge and road toll stations without stopping to pay tolls. Banks install this type of ETC express card with the principle of 'pass first, pay later'. ETC application conditions are as follows: Provide the original and photocopy of the vehicle owner's valid ID card and vehicle registration certificate. The photocopy of the driving license should include the page with the most recent annual inspection stamp; Postal credit card application form. This credit card is used to bind the ETC card. After obtaining the credit card, swipe it twice and present the POS slip to the designated postal outlet to receive and install the ETC on-board device for free, with no charges during the process; Be between 18 and 60 years old; Own a vehicle under personal name. Below are precautions for installing ETC: Do not block the view. It is best to install it behind the rearview mirror: Many car models have a large rearward angle of the windshield, which reduces the driver's field of vision. If this is not considered during ETC installation, it will increase the driver's blind spot. Install it on the right side behind the rearview mirror to avoid blocking the view. Do not affect charging: The ETC electronic tag consumes power, but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the blackened areas on the windshield and do not place it where the solar panel can be easily blocked. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After the electronic tag is installed, the windshield will press the anti-removal lever in. If it is removed arbitrarily, the anti-removal lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to go to an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Notes for using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle in front. The ETC lane recognition speed is 20 kilometers per hour. If the speed is too fast, the vehicle device information cannot be read, leading to failed deductions. When using a debit card to bind ETC, insufficient balance will also cause deduction failures.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.