What type of oil should be used for a three-cylinder Excelle?

1 Answers
OEva
07/30/25 12:17am
The three-cylinder Excelle should use 5W30 engine oil, which serves the functions of lubrication, cleaning, buffering, rust prevention, and heat dissipation in the engine. The working principle of a three-cylinder engine involves converting chemical energy into thermal energy by burning a mixture of gasoline and air in a sealed cylinder, thereby driving piston movement. The Excelle's body dimensions are: 4609mm in length, 1798mm in width, and 1464mm in height, with a wheelbase of 2640mm and a fuel tank capacity of 44 liters. The Excelle is equipped with a 1.5T naturally aspirated engine, delivering a maximum horsepower of 113 PS, a maximum power of 83 kW, and a maximum torque of 141 Nm, paired with a 6-speed automatic transmission.
Was this review help?
1
0
Share
More Forum Discussions

How to use cruise control in Audi Q5?

Audi Q5's cruise control can be used in two ways: 1. Press the button at the top of the cruise control lever, 2. Pull the cruise control lever back. Here is some relevant information about cruise control: 1. The Cruise Control System (CCS), also known as speed control system or autopilot system, automatically maintains the vehicle speed as set by the driver without the need to press the accelerator pedal, allowing the car to travel at a constant speed. This feature reduces driver fatigue during long highway drives by eliminating the need to control the accelerator pedal, while also minimizing unnecessary speed variations and saving fuel. 2. With regular cruise control, the driver must manually apply the brakes; only adaptive cruise control can automatically brake. However, electronic devices may occasionally malfunction, so it's important to monitor surrounding traffic conditions and be prepared to brake at any time.
5
5
Share

What does 'pull' mean on the windshield wiper?

The 'pull' function on the windshield wiper means pulling it upward to automatically spray water and clean the front windshield. Below are the relevant explanations: 1. Introduction: The wiper, also known as the windshield wiper, is a device used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. 2. Operating Principle: The power source of the wiper comes from an electric motor, which is the core of the entire wiper system. The quality requirements for the wiper motor are quite high. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part. The function of the worm gear mechanism is to reduce speed and increase torque. Its output shaft drives a four-bar linkage mechanism, which converts continuous rotational motion into left-right swinging motion.
5
3
Share

What is the difference between Corolla Hybrid and Corolla Hybrid E+?

The difference lies in the engine. The Hybrid E+ adds charging functionality, and the battery pack capacity is also increased, with higher energy density in the Hybrid E+ battery. The related details are as follows: 1. The Corolla Hybrid is positioned in the SML-H market, launched in 2015, within the price range of A-segment cars. It adopts Toyota's advanced hybrid dual-power technology, ensuring excellent performance while maintaining low fuel consumption and emissions. 2. The FAW Toyota Corolla Hybrid E+ is a plug-in hybrid, eligible for green license plates with controllable fuel consumption. Its combined fuel consumption is only 4.3L/100km without charging, making it highly fuel-efficient. 3. The interior of the Corolla Hybrid E+ feels warm and luxurious, featuring a leather-wrapped three-spoke multifunction steering wheel, a 4.2-inch LCD instrument panel, and an 8-inch touchscreen LCD display.
7
3
Share

What type of tires does the Outlander use?

This vehicle uses tires of a single size specification across all models, which is 225/55-R18. Below are relevant details about the tires: 1. Tires are the only components of a car that come into contact with the ground, and they are crucial for the vehicle's driving stability and safety. Being rubber products, tires are prone to aging over time, hence they require regular replacement. During routine use, it's essential to replace tires on schedule. Generally, cars need their tires replaced every four years. 2. When purchasing tires, always check the production date carefully. Many may not be aware, but tires have a shelf life. Typically, unused tires have a shelf life of three years. If you find that the tires have been in storage for more than three years at the time of purchase, it's advisable not to proceed with the purchase.
19
4
Share

What Causes the Engine Yellow Light on the Tachometer to Illuminate?

There are two main reasons why the engine yellow light on the tachometer illuminates, with the primary reason being vehicle self-inspection. Below are the relevant explanations: 1. Vehicle Self-Inspection: When the car's power is turned on, the vehicle undergoes a self-inspection. During this time, not only the engine yellow light but also other fault lights will illuminate simultaneously before turning off together. 2. Engine Fault: If the engine's yellow fault light remains illuminated after the car is started, it indicates that the ECU is alerting to an engine fault. For instance, sensors such as those for water temperature, crankshaft position, air flow, intake temperature, and oxygen sensors, when damaged, have poor contact, or experience signal interruption, the car's ECU cannot accurately obtain engine data, leading to the illumination of the engine fault light.
11
5
Share

What is Benelli?

Benelli is one of the oldest motorcycle manufacturers in Italy and the world. Founded in 1911, the company has weathered storms and never ceased production, even during wars and the Great Depression, making it also recognized as one of the youngest motorcycle manufacturers globally. Here are some additional details: 1. Acquisition: In October 2005, China's Qianjiang Motorcycle successfully acquired this century-old Italian motorcycle company, marking the first time a Chinese motorcycle company acquired a renowned European motorcycle enterprise, and the first true cross-border acquisition of a European company by China's machinery industry, filling the gap in China's production of large-displacement high-end motorcycles and racing bikes. 2. R&D and Design: The R&D center is located in Pesaro, Italy, where Benelli has gathered the finest local R&D and design talents. The collision of youthful design creativity with the brand's long-standing cultural heritage has resulted in the creation of even purer and more stunning Italian elements.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.