What type of oil should be added to the Verna?

1 Answers
DePaisley
07/30/25 7:06am
The Verna uses 5W20 engine oil. The number before the W indicates cold resistance - the smaller the number, the better the cold resistance. In northern winters, 0W or 5W oil is recommended. The number after W represents the oil viscosity - the larger the number, the higher the viscosity and better protective performance. The Verna is a model jointly designed and developed by Beijing Hyundai, Hyundai North America, and the European Design Center. Its body dimensions are 4340mm in length, 1700mm in width, and 1460mm in height, with a wheelbase of 2570mm. In terms of appearance, the Verna's body design adopts Hyundai's commonly used "Fluidic Sculpture" concept, featuring dynamic and smooth body lines that highlight a youthful and passionate image.
Was this review help?
17
1
Share
More Forum Discussions

Is it necessary to press the brake when shifting from S to D gear?

Shifting from S to D gear does not require pressing the brake. Below are some relevant introductions about automatic transmissions: 1. Shifting from P to any gear requires pressing the brake: This is a safety feature to ensure driving safety. Otherwise, the moment you shift from P to R or D, the car will immediately have a driving force backward or forward, and the handbrake alone may not be sufficient to stabilize the car, which could easily lead to danger. 2. D-N and R-N require the car to be stationary: For automatic transmission cars, when shifting from D or R gear to neutral, it is best to stop the car completely before operating. This is because the gear positions of an automatic transmission are controlled by the clamping and releasing of one-way clutches. When a gear is engaged, the corresponding gear clutch is pressed under the action of the hydraulic mechanism, and when the gear is disengaged, the hydraulic mechanism releases the pressure to loosen the clutch. If the car is still moving when disengaging the gear, the wheels will continue to drive the gear mechanism, leading to increased wear on the gear clutch.
8
2
Share

Is it necessary to brake before making a U-turn in Subject 3?

It is advisable to brake before making a U-turn in Subject 3. Here are some precautions to take during the U-turn: 1. Decelerate before shifting gears: Before making a U-turn, the vehicle is usually moving at a relatively high speed, around 30-40 km/h. Therefore, after completing the light operation, apply the brake first to reduce the speed, then press the clutch to downshift. 2. Check the rearview mirror to ensure surrounding conditions: To ensure a smooth U-turn, always check the rearview mirror to confirm safety behind before proceeding. Then look forward; if there are vehicles going straight, let them pass first. If there are no special circumstances, you can proceed with the U-turn. 3. Avoid turning left too early: Although you need to turn the steering wheel fully to the left for a U-turn, remember not to start turning left too soon. The earlier you turn, the more difficult it becomes to complete the U-turn. So, keep the vehicle moving straight, and when ready to make the U-turn, quickly turn the steering wheel to the left.
16
4
Share

Will the Engine Definitely Stall if Water Enters?

Engine will definitely stall if water enters. The reason is that after the distributor cap gets wet, the distributor loses its normal ignition function. The engine air filter element becomes soaked, leading to increased intake resistance and water entering the combustion chamber, making it impossible for the spark plug to ignite. If the engine is restarted at this time, it is highly likely to cause hydro-lock. After water enters the engine, check the electrical circuits: Since dirty rainwater is an excellent conductor, the circuits may short-circuit when exposed to water. After water enters the engine, check whether the braking system is affected: Because the braking system has strong absorbency, rainwater can easily enter the brake fluid, which will affect braking performance. In severe cases, it may even cause the braking system to fail. Damages caused by water entering the engine: Once water enters the car engine, at best, the spark plug may fail to ignite or the engine may stall directly; at worst, it can cause cylinder scoring, hydro-lock, connecting rod fracture, crankshaft bending, etc.
19
0
Share

Is it necessary to buy a car with a sunroof?

Advantages and disadvantages of cars with sunroofs: 1. Advantages: A car sunroof can provide better ventilation and lighting inside the car, so you won't feel stuffy while driving. By simply opening the sunroof, you can utilize the pressure difference between the inside and outside of the car to expel stale air and replenish fresh air, a process that doesn't subject the vehicle to wind resistance. In case of an accident where the doors cannot be opened, passengers might be able to escape through the sunroof. 2. Disadvantages: Since sunroofs are made of glass, they are relatively fragile and more susceptible to damage from falling objects. Additionally, sunroofs can increase the heat inside the car during summer, as sunlight entering through the sunroof turns the car into a greenhouse, absorbing heat without dissipating it. Lastly, there's the issue of sealing. If the car is used in areas with poor air quality, dust and sand can accumulate in the sunroof's sliding tracks, leading to reduced sealing performance and potential water leakage during rainy days. Regarding whether to buy a car with a sunroof, it is recommended that users make their choice based on personal needs.
10
5
Share

What Causes the Motorcycle Kick Starter to Not Depress?

The reasons why the motorcycle kick starter cannot be depressed: the engine temperature is too high causing cylinder seizure; damaged gears or insufficient gearbox oil. It may be due to a stuck kick starter. Lack of engine oil leading to seized crankshaft and cylinder. If there is engine oil, it might be caused by the oil pump failing to deliver oil, resulting in cylinder seizure. Motorcycle: A motorcycle, powered by a gasoline engine, is a two- or three-wheeled vehicle steered by handlebars that control the front wheel. It is lightweight, flexible, and fast, widely used for patrol, passenger and cargo transport, and also serves as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and tourers. Components of a Motorcycle: Generally, a motorcycle consists of seven parts: the engine, transmission, running gear, operating and braking system, cabin or cargo compartment, electrical system, and instrument panel. The engine is a two-stroke or four-stroke gasoline engine, cooled by air, either naturally or forcibly. The engine crankcase is integrated with the clutch and gearbox, making the structure compact.
1
5
Share

Where is the location for renewing a driver's license in Gutian County?

You need to go to the local traffic police brigade's vehicle management office to handle the license renewal. If a motor vehicle driver's household registration is relocated out of the jurisdiction of the original vehicle management office, they should apply for a license renewal at the vehicle management office of the relocation destination. Driver's license renewal cycle: During the use of a motor vehicle driver's license, it needs to undergo two renewals. The first renewal is six years after obtaining the motor vehicle driver's license, and the second renewal is ten years after the six-year renewal period. The motor vehicle driver's license renewed after the ten-year period is a long-term motor vehicle driver's license, which no longer requires renewal. Conditions for renewing a driver's license: In each scoring cycle, it is not allowed to deduct 12 points at once or accumulate a deduction of 12 points. For example, within the six-year period after initially obtaining the license, if there is a scoring cycle where 12 points are deducted at once, the renewed motor vehicle driver's license after the six-year period will still have a validity period of six years.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.