What type of oil is suitable for the Mazda CX5?

What is the air intake volume in kilograms per hour for the Mercedes-Benz 272 engine?

The idle air flow rate of the Mercedes-Benz 272 engine should be around 2.5g/s. Normal idle flow rate: Under normal conditions, the air flow signal data of the Mercedes-Benz 272 engine at idle is approximately 2.5g/s. If it is less than 2.0g/s, it indicates an air leak in the intake system. If it exceeds 4.0g/s, it suggests additional load on the engine. The normal air flow value varies for each engine model, with larger displacement engines having higher air flow values. Flow sensor fault classification: If the air intake volume increases, the ECU controls the intake volume, and vice versa. Faults in the air flow sensor are divided into two categories. One is when the signal exceeds the specified range, indicating a fault in the air flow sensor. Modern electronically controlled vehicles have a fail-safe function.

10

1

Share

How often should the Mercedes-Benz fuel filter be replaced?

Mercedes-Benz fuel filter should be replaced every 20,000 to 30,000 kilometers or every 2 years. The fuel filter is also known as the gasoline filter or fuel filter. Function of the fuel filter: The fuel filter is used to filter gasoline, which may contain certain impurities. The fuel filter helps to remove these impurities, preventing them from participating in the ignition and combustion process. Effects of not replacing the fuel filter: If the fuel filter is not replaced for a long time, it may cause difficulties in starting the car, poor engine performance, and shaking phenomena during driving or idling. All these issues are caused by the fuel filter not being replaced in time, leading to clogging, insufficient gasoline combustion, and reduced fuel pressure.

10

1

Share

What is the Bora P1624 fault code?

Bora P1624 fault code, applicable to Audi and Volkswagen, means the Malfunction Indicator Lamp (MIL) request signal is currently active. False fault: The fault light is on, but there is no actual fault with the car itself. Since the ECU can only recognize voltage, occasional voltage fluctuations may be interpreted as a fault by the ECU, causing the fault light to illuminate and record the issue. However, this does not affect the vehicle. In such cases, simply use an OBD scanner to clear the fault code. Intermittent fault: The fault light turns on and off sporadically, and the fault appears and disappears. A common scenario is a loose sensor wiring harness or poor contact in a connector, leading to intermittent signal transmission, which falls under this category. Genuine fault: This is usually accompanied by noticeable fault symptoms.

8

2

Share

How to use Ford's S gear?

When climbing a slope or exiting an underground garage, you can use the S gear for climbing. Introduction to car gears: Car gears usually consist of D gear, R gear, P gear, N gear, and S gear. Among them, D gear is the forward gear, R gear is the reverse gear, P gear is the parking gear, N gear is the neutral gear, and S gear is the sport gear (for models equipped with sport mode). Precautions for gear usage: The vehicle must be completely stopped before using the P gear, otherwise the mechanical part of the automatic transmission may be damaged. When the vehicle is parked and not in use, the gear should be in this position, at which time the wheels are mechanically locked, and the handbrake can be used to prevent slipping. Damage may occur.

16

5

Share

Where is the transmission of the Volkswagen Tharu located?

The transmission of the Volkswagen Tharu is located at the rear connection point of the engine. Functions of the transmission: Changing the transmission ratio to expand the range of torque and speed variations of the drive wheels, enabling the vehicle to reverse while maintaining the same engine rotation direction. It also allows for neutral gear to interrupt power transmission, facilitating engine start-up, gear shifting, and power output when needed. The transmission consists of a gear transmission mechanism and a control mechanism, and a power take-off can be added if necessary. Types of transmissions: They are divided into manual and automatic transmissions. Manual transmissions mainly consist of gears and shafts, achieving speed and torque variations through different gear combinations. Automatic transmissions (AT) are composed of a torque converter, planetary gears, and a hydraulic control system, achieving speed and torque variations through hydraulic transmission and gear combinations.

6

0

Share

Does the BMW 5 Series not have tire pressure monitoring?

The BMW 5 Series is equipped with tire pressure monitoring, specifically a direct tire pressure monitoring system. This system allows the driver to view real-time tire pressure data, enabling constant awareness of tire inflation levels. The tire pressure monitoring system operates by either recording wheel rotation speeds or utilizing electronic sensors installed within the tires to automatically monitor various tire conditions in real-time, providing effective safety assurance during driving. The BMW 5 Series is a mid-to-large-sized sedan with body dimensions of 5047mm in length, 1860mm in width, and 1491mm in height, featuring a wheelbase of 3108mm. In terms of powertrain, the BMW 5 Series is powered by a V8 engine delivering maximum power output of 245 kilowatts and peak torque of 450 Newton-meters, with a top speed of 250 kilometers per hour.

13

2

Share

What type of oil is suitable for the Mazda CX5?

What is the air intake volume in kilograms per hour for the Mercedes-Benz 272 engine?

How often should the Mercedes-Benz fuel filter be replaced?

What is the Bora P1624 fault code?

How to use Ford's S gear?

Where is the transmission of the Volkswagen Tharu located?

Does the BMW 5 Series not have tire pressure monitoring?

Where is the oil pressure sensor located on the Wuling Hongguang?

How to Add Refrigeration Oil?

What is the rim size of the BMW 5 Series?

Where is the Oil Pressure Sensor Located on the Haval H2S?