···
Log in / Register

What type of oil does the Vision X6 require?

5 Answers
MacLincoln
07/24/25 10:15am

The Vision X6 is recommended to use 5W-30 full synthetic oil. The following points should be noted when changing the oil: Choosing the right oil: Oil selection should be based on the engine's requirements. Do not use high-grade oil in lower-grade engines, nor use low-grade oil in high-grade engines. Choose oil that matches the engine, preferably multi-grade oil, which offers advantages such as fuel efficiency, long service life, and high performance, providing better protection for the engine. Oil level should be below the dipstick mark: The oil level should be slightly below the mark on the dipstick. Do not overfill. Select oil with different viscosities based on the engine's operating conditions. Do not mix oils: If switching from mid-grade or high-grade oil to regular oil, first drain the existing oil completely and clean the lubrication system thoroughly to avoid mixing.

Was this review help?
7
5
Share
OmarFitz
08/11/25 2:09am

I've been driving the Geely Vision X6 for several years, and based on my experience and personal observations, the most suitable oil for this SUV is a full synthetic 5W-30 viscosity engine oil. The advantage of choosing this oil is its stable performance in most climates, such as easy cold starts in winter and reliable engine protection during summer heat. I've used brands like Mobil and Shell, both with good results, but avoid cheaper mineral oils as they may increase engine noise or fuel consumption. I usually check the oil level every 8,000 kilometers or so, topping it up promptly when low to prevent minor issues from turning into major repairs. Remember, it's best to consult the vehicle manual before selecting oil—it provides specific recommendations, so don't blindly follow trends. Regular maintenance is key; don't skimp on costs, or repairs will be even more expensive.

Was this review help?
14
1
Share
Expand All
BentleyMarie
09/25/25 3:32am

Choosing engine oil for a family car like the Geely Vision X6 isn't complicated. I usually go for hassle-free options like 5W-30 semi-synthetic or mineral oils, which are more economical, and my engine hasn't had major issues. The key is to consider your driving habits—since I mainly deal with stop-and-go city traffic, a moderate viscosity oil works fine. Don't overlook seasonal changes; prioritize thinner oils in cold weather to avoid startup difficulties. As for brands, I've bought Castrol online, and it's reliably effective. Remember to change the oil every six months or 8,000 kilometers, and check the filter at the same time to keep the car running longer. Also, keep a small bottle of fresh oil in the car as a backup—if the oil level drops during a trip, you can top it up in an emergency to prevent unexpected issues.

Was this review help?
15
4
Share
Expand All
JayceAnn
11/08/25 5:40am

When it comes to choosing engine oil for the Geely Vision X6, I lean towards practicality. Just check the manual, which recommends 5W-30 full synthetic oil. When I use it, the engine runs smoothly, and cold starts are effortless. Don't overthink the brand—just make sure it's genuine. The key is regular oil changes. Checking the oil level yourself is simple: after warming up the engine, turn it off, wait 5 minutes, then pull out the dipstick. As long as the oil level is above the midpoint, you're good to go.

Was this review help?
4
0
Share
Expand All
DiJordan
12/29/25 7:25am

As a family car user, I use fully synthetic 5W-30 engine oil for my Geely Vision X6, which gives me more peace of mind for engine protection. When selecting oil, pay attention to certification standards such as API SN, and ensure it's from genuine channels. I perform an oil change maintenance every 8,000 kilometers without delay. I've developed the habit of checking dashboard warnings before parking. If the oil warning light comes on, I take it for repair immediately to avoid complications.

Was this review help?
15
4
Share
Expand All
More Forum Discussions

Is Vehicle Archiving Manual or Automatic?

Vehicle archiving is a manual process that can be completed either at designated locations or online. Processing at Designated Locations: Vehicle archiving refers to the transfer of ownership of a registered motor vehicle. The new owner must submit relevant documents and have the vehicle inspected at a designated location within 30 days of delivery to complete the transfer registration. The vehicle archiving process takes 3 working days. When processing transfer registration, if the new owner is an organization whose address falls outside the jurisdiction of the local vehicle management office, they may submit a copy of the organization's code certificate, a power of attorney with the organization's official seal, and the authorized representative's identity proof as the vehicle owner's identification. Online Processing: If the vehicle is successfully registered on the Traffic Management 12123 platform, it is considered archived. Online processing is now available, but you must download the Traffic Management 12123 app. After the vehicle is registered, it will appear in your personal account on the app. If it doesn't appear, you can add it manually. Archiving refers to services processed at the vehicle management office (including replacing the registration certificate, reissuing the vehicle license, releasing a mortgage, reissuing license plates, vehicle inspections, etc.). Completing these services is only the first step; the vehicle management office must also archive the service in their system, which takes three working days. Only after archiving is the service considered complete. If not archived, a prompt indicating pending services will appear when attempting to process subsequent services, preventing vehicle transfer procedures.
5
4
Share

What is Parking Diesel Heater E01?

Parking diesel heater E01 is a fault code. Causes include system pressure being too low or control circuit damage. System pressure too low: When the pressure value falls below the normal range, a fault code will appear. This can lead to operational failures of the heater, requiring prompt inspection and repair at an automotive repair shop. Control circuit damage: For a vehicle's parking heater, indicator light flashing indicates control circuit issues, which may cause heater malfunctions. The heater utilizes the vehicle's battery and fuel tank for instant power supply and minimal fuel supply, generating heat through gasoline combustion to warm the engine's circulating water for hot starts while also heating the cabin. After using the car heater, the preheated engine experiences significantly reduced wear. Starting a car at extremely low temperatures causes substantial engine damage, so the heater's preheating function effectively minimizes wear.
15
4
Share

Are Car Tire Sizes the Same?

Most car tire model markings appear as 175/70R1477H, where 175 represents the tire width of 175mm, 70 indicates the aspect ratio of the tire section is 70%, R stands for radial tire, the tire diameter is 14 inches, the load index is 77, and the permissible speed rating is H. The international standard car tire code expresses the section width and aspect ratio percentage in millimeters. This is followed by the tire type code, rim diameter (in inches), and load index (permissible load capacity code). Tire sizes are printed on the sidewall and can be represented in two ways, such as 34*7 or 7.50-20. The former denotes high-pressure tires, while the latter indicates low-pressure tires. Additionally, many other markings are printed on the sidewall, for example, D is used for light vehicles, F for medium vehicles, G for standard vehicles, and H, L, J for large luxury and high-performance vehicles.
17
2
Share

Under What Conditions Do Cars Emit the Most Carbon Monoxide?

Cars emit the most carbon monoxide when the engine is running while the vehicle is stationary. The combustion chamber of a car engine is more prone to producing carbon monoxide when operating at high temperatures. When idling with the engine running, the combustion process does not perform work, leading to an increase in the temperature of the combustion chamber and consequently more carbon monoxide production. The function of the engine is to convert the thermal energy of gasoline into mechanical energy by burning it in a sealed cylinder, expanding the gas, and pushing the piston to perform work. Methods for engine maintenance include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning the radiator scale; 4. Regularly removing engine carbon deposits; 5. Regularly replacing the car's three filters; 6. Maintaining a reasonable engine speed.
15
1
Share

How to Identify the Year from a Vehicle's VIN?

To determine the production year from a vehicle's VIN (Vehicle Identification Number), look at the 10th character of the VIN, which indicates the year of manufacture. Note that the specific production month cannot be identified from the VIN. The year may be represented by either a digit or a letter, following a 30-year cycle that excludes the letter 'O' and the number '10'. The VIN consists of 17 characters, each with specific meanings: 1. The first three characters denote the country of manufacture, the manufacturer, and the vehicle type. 2. Characters 4 through 8 represent vehicle features such as model, body type, engine type, and gross vehicle weight rating. 3. The 9th character is a check digit used to verify the VIN's accuracy. 4. The 11th character indicates the assembly plant location. 5. Characters 12 through 17 are the production sequence number.
8
0
Share

How to Check the Production Date of a Corolla?

The methods to check the production date of a Corolla are: 1. The Vehicle Identification Number (VIN), also known as the chassis number, located below the front windshield. The 10th digit of the VIN indicates the production date of the vehicle; 2. The engine compartment's aluminum nameplate, which displays the vehicle's serial number, engine displacement, model, brand, and specific production date; 3. The vehicle's certificate of conformity provided by the manufacturer. Taking the 2021 Corolla as an example, it is a compact car with body dimensions of 4635mm in length, 1780mm in width, and 1455mm in height, a wheelbase of 2700mm, a minimum ground clearance of 152mm, and a curb weight of 1335kg.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.