What type of oil does the Honda Haoying use?

2 Answers
MacMason
07/23/25 11:13pm
The Honda Haoying 1.5T and 2.0 models both use 0w20 (4L) fully synthetic oil, with a replacement interval of 5,000 kilometers. Engine oil, also known as engine lubricant, serves the following main functions: 1. Lubrication and friction reduction: It forms a protective oil film between sliding components to prevent friction and ensure smooth operation. 2. Cooling assistance: During engine operation, high temperatures are generated. When the oil reaches these areas, it absorbs and dissipates heat, aiding in component cooling. 3. Cleaning: It carries away carbon deposits, sludge, and metal wear particles from engine parts back to the oil pan, effectively cleaning the surfaces. 4. Sealing and leak prevention: The oil creates a seal between piston rings and pistons, reducing gas leakage and preventing contaminants from entering. 5. Rust and corrosion prevention: The lubricant forms a protective barrier on parts, shielding them from water, air, acids, and harmful gases. 6. Shock absorption: During sudden pressure spikes in engine cylinders, the oil helps cushion the impact on pistons, piston rings, connecting rods, and crankshaft bearings by distributing the load through lubrication.
Was this review help?
4
4
Share
AliyahAnn
08/10/25 7:10pm
I remember the Honda Haoying is quite smooth to drive, and 0W-20 synthetic oil is the most suitable for its engine, as recommended in the manual. This is because of its low viscosity and strong cold-start protection, which keeps the engine running quieter and more fuel-efficient. I’ve been driving this car for years and always stick to Honda’s genuine oil—it makes acceleration feel especially smooth. Every oil change, I check the dipstick to ensure the oil level is correct. Avoid switching to higher-viscosity oils like 10W-30, as it may increase wear and affect performance. I recommend changing the oil every 8,000 km or so, and checking if the filter needs replacement to prevent debris buildup. With proper maintenance, the car’s lifespan can be significantly extended, saving on repair costs.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

What is the Difference Between T and L in Cars?

The differences between T and L in cars are: 1. Different meanings: T represents a turbocharged engine, while L represents a naturally aspirated engine. 2. Different acceleration: The turbocharged engine has stronger instant acceleration compared to the naturally aspirated engine; the naturally aspirated engine provides a smoother acceleration process. 3. Different power: The naturally aspirated engine has stronger power before the turbo kicks in, while the turbocharged engine has stronger power after the turbo engages. An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, electric motors, etc. For example, an internal combustion engine typically converts chemical energy into mechanical energy. The term 'engine' can refer to both the power-generating device and the entire machine that includes the power unit.
1
0
Share

What Causes Inaccurate Fuel Gauge Readings?

Reasons for inaccurate fuel gauge readings: 1. Fuel gauge issue: If you've confirmed the tank is full but the needle doesn't reach the top, there may be a malfunction in the fuel gauge display or fuel level indicator. 2. Design issue: Some vehicle models don't use linear fuel gauge designs, resulting in slower readings in the first half and faster readings in the second half due to different design approaches. 3. Fuel level sensor problem: A faulty fuel level sensor prevents the system from accurately detecting fuel height, affecting gauge accuracy. 4. Parking position: The parking angle can change the float ball height in the fuel tank, affecting level judgment. Always check fuel levels when the vehicle is on flat ground and driving straight.
1
4
Share

How to Adjust the Seats in Volkswagen Tiguan?

Methods to adjust the seats in Volkswagen Tiguan: 1. Pull the lumbar support button forward or backward to adjust the angle of lumbar support; 2. Move the seat position switch forward or backward to adjust the seat position, lift up or press down to raise or lower the seat; 3. Move the backrest switch forward or backward to adjust the backrest angle; 4. To adjust the headrest, firmly grasp both sides of the headrest with both hands, push forward or pull upward until it locks into the desired position. The Volkswagen Tiguan is a compact SUV produced by SAIC Volkswagen, with a body length, width, and height of 4506mm, 1809mm, and 1685mm respectively, and a wheelbase of 2684mm.
18
5
Share

How to Deal with Adhesive on Car Glass?

Methods for dealing with adhesive on car glass: 1. Vinegar Method: First, scrape off the adhesive on the glass with a small knife, then mix half vinegar and half water, put it in a spray bottle, spray it on the glass, and polish it with old newspaper; 2. Use an Eraser: First, repeatedly wipe the adhesive marks with an eraser, prepare one dry and one wet cloth, first wipe the glass surface with the wet cloth, then dip the dry cloth in a small amount of white wine and wipe the glass vigorously; 3. Turpentine Method: First, gently scrape off the plastic film with a small knife, then repeatedly wipe it with a steel wool ball dipped in turpentine, and finally wipe it clean with a dry cloth. Car glass is an indispensable part of the car body accessories, mainly serving a protective function. Car glass mainly includes laminated glass, tempered glass, and regional tempered glass, which can withstand strong impact forces.
16
5
Share

What are the steps to remove the front bumper of a Langdong?

Steps to remove the front bumper of a Langdong: 1. Remove the left and right inner liner clips and pry open the inner liner; 2. There is a screw on the inner side of each bumper corner. Apply slight force to pry it open, then open the hood; 3. Remove the clips on the top of the bumper, followed by the clips and screws at the bottom, to detach the front bumper. The car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle body. The Langdong is a compact sedan produced by Beijing Hyundai, with body dimensions of 4570mm in length, 1775mm in width, and 1445mm in height, and a wheelbase of 2700mm. The front suspension of this vehicle is a MacPherson strut independent suspension, while the rear suspension is a torsion beam non-independent suspension.
8
1
Share

What are the starting steps for a Mercedes-Benz?

Mercedes-Benz starting steps: First, close the door, insert the key, press the brake, and turn the key to start. For Mercedes-Benz vehicles with a keyless start system, simply carry the key into the car, ensure the gear is in P, press the brake pedal, and press the start button to ignite the engine. Do not release the brake pedal at this time; shift into P to drive. Mercedes-Benz is a German automotive brand, and the company also offers models such as the A-Class, B-Class, C-Class, E-Class, S-Class, CLA, CLS, GLA, and GLK. Taking the Mercedes-Benz E-Class as an example, its body dimensions are 5078mm in length, 1860mm in width, and 1484mm in height, with a wheelbase of 3079mm. Both the front and rear suspensions of this vehicle use multi-link independent suspension.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.