What type of oil does the Dongfeng Fengshen AX3 use?

1 Answers
CadenLee
07/30/25 4:06am
Dongfeng Fengshen AX3 uses 5W-30 engine oil. The Dongfeng Fengshen AX3 measures 4520mm in length, 1740mm in width, and 1562mm in height, with a wheelbase of 2620mm. It features a MacPherson independent front suspension and a torsion beam non-independent rear suspension, with electric power steering. The vehicle is equipped with two engine options: a 1.0T and a 1.6L. There are three transmission options available: a 5-speed manual transmission, a 4-speed automatic transmission, and a 6-speed dual-clutch transmission. The 1.0T engine delivers a maximum output power of 92 kW and a peak torque of 196 Nm, while the 1.6L engine produces a maximum output power of 86 kW and a peak torque of 153 Nm, with a top speed of 180 km/h.
Was this review help?
19
4
Share
More Forum Discussions

What is the cause of the Volkswagen U010000 fault code?

Fault code U010000 indicates a loss of communication with the Engine Control Module (ECM)/Powertrain Control Module (PCM) A. Network fault: This is a fault in the multiplex communication system (i.e., a network fault). In this case, it is necessary to measure the wiring harness of the multiplex communication system according to the circuit diagram to check for any short circuits to the vehicle body ground or to the positive terminal. Measure whether the resistance value is within the standard range, and then also measure whether the terminal resistance value is normal. Functions of the automotive electronic control unit: The automotive electronic control unit is the core component of the electronic control system, receiving input signals from sensors or other devices and processing the input signals into signals that the computer can accept.
3
4
Share

How is the Audi A4L engine model CUJ?

Audi A4L 2019 40TFSI Sport model uses a 2.0T engine with the code name EA888. This engine can produce 190 horsepower and 320N.m torque, and technically, Audi's EA888 is more advanced. Introduction to engine models: The engine model is the manufacturer's labeling of relevant engine information according to regulations or industry practices. This includes the engine's production company, specifications, performance, features, technology, purpose, and product batch. Engines installed in cars or multi-purpose passenger vehicles are required to display the professional manufacturer, model, and production number. Ways to check the engine: You can check on the vehicle's driving license, motor vehicle registration certificate, purchase invoice, factory certificate of compliance, operating license for commercial vehicles, vehicle purchase tax payment certificate, public security registration records, vehicle insurance card, or the actual engine (usually on the engine nameplate).
1
2
Share

Why does the Teana not start and the brake pedal feels hard?

The Teana fails to start and the brake pedal feels hard because the vacuum booster pump is required to assist when pressing the brake. If the vacuum booster pump lacks assistance, the brake will have no power assist, making it difficult to press down. For the vacuum booster pump to generate assistance, the car's engine must be running so that the pump can create a vacuum. Engine carbon buildup: This failure to start is mainly caused by excessive carbon buildup in the idle speed motor, intake tract, intake valves, and combustion chamber. Excessive carbon deposits and dirt in the intake tract alter the cross-sectional area of the air passage, leading to an overly rich or lean air-fuel mixture. This results in abnormal combustion, engine shaking after starting, or even a complete failure to start. Fuel injector leakage: The Zotye T600's failure to start may also be due to issues with the fuel injectors, such as leakage or excessive carbon buildup, causing a lean air-fuel mixture during startup and making it difficult to start. Additionally, when the carbon canister or carbon canister solenoid valve malfunctions, it can also lead to difficulty in starting.
19
0
Share

What Causes the Friction Sound When Turning the Mercedes Steering Wheel?

Small car steering wheel turning with abnormal noise may be due to steering wheel issues or stabilizer bar problems. Steering wheel issues: If the abnormal noise comes from inside the steering wheel, the problem is most likely caused by the clock spring inside the steering wheel. Remove the steering wheel clock spring and apply some grease to see if the noise persists. If it still makes noise, replace the clock spring. Be gentle when removing the steering wheel, or disconnect the airbag fuse to prevent the airbag from deploying. Stabilizer bar problems: If the noise is not coming from the shock absorber, check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings will not only cause noise when turning the steering wheel but also when driving on uneven roads. Loose stabilizer bar bushings can be fixed by adding shims, but if they are damaged, they must be replaced.
6
0
Share

Does the Audi RS7 have an electric rear wing?

Audi RS7 has an electric rear wing. The function of car rear wing: The function of the car rear wing is to increase downforce and enhance the stability of the car during high-speed driving. Types of electric rear wings: There are two types, one is automatic lifting, and the other is manual lifting. The electric lifting mechanism raises the wing when the car reaches a certain speed, and high-end cars can also automatically adjust the angle. How car rear wings work: Fluid kinematics, mainly to maintain the stability of the car body during high-speed operation, especially the stability of the rear part of the car, increasing grip. Since the overall shape of the car resembles an airfoil, with a long upper arc and a flat chassis, it tends to lose contact with the ground at high speeds, making the body feel light and prone to skidding. Installing a rear wing can alleviate this to some extent, improving the stability of the car body.
8
2
Share

Does Mercedes-Benz cover tire damage under warranty?

During the warranty period, tire damage occurring under normal usage conditions as specified can be replaced free of charge. Free repairs: Within the vehicle's warranty period, manufacturers will provide free repair or replacement services for any malfunctions or component damages that occur under normal usage conditions as specified. During the warranty period, tire damage occurring under normal usage conditions can be replaced free of charge. Maintenance of wear parts: For wear parts such as tires, rims, headlights, and brakes, automobile dealers typically offer a warranty of 3-6 months or 5,000 kilometers. If the vehicle is within the relevant period, free replacement can be performed.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.