What type of oil does the Changan CS75 use?

Is It Necessary to Buy Car Seat Covers?

It is necessary to install car seat covers for new cars. Here is more relevant information: 1. Functions of car seat covers: (1) Comfort: Due to the special profession of drivers, long-term driving can easily lead to fatigue. A comfortable set of seat covers is very important for the body! (2) Protection of leather seats: Since many cars are equipped with leather seats, the protective role of seat covers is also crucial. (3) Health: Promotes blood circulation, relieves tension and fatigue, and has a health-care effect. (4) Enhances style: As the saying goes, clothes make the man and the saddle makes the horse. The same goes for cars. A stylish and unique car seat cover can undoubtedly enhance the overall aesthetic and style of the car, while also reflecting the owner's taste and personality. (5) Practicality: Leather seats are too cold in winter and too hot in summer, which is a common experience. The unique functions of seat covers can alleviate these problems to some extent. 2. Types of seat covers: Winter: Wool car seat covers, fur car seat covers, down pads, down cotton pads, imitation fur pads. Summer: Ice silk (chemical fiber) car seat covers, sub-silk car seat covers, snow silk car seat covers, and other hand-woven seat covers and leather car seat covers. All-season: Massage pads, health-care pads, fabric seat covers, and leather seat covers.

15

3

Share

What is the concept of a negative pressure ambulance?

Negative pressure ambulance uses technical means to make the air pressure inside the vehicle lower than the external atmospheric pressure, ensuring that air flows naturally from outside to inside the vehicle. After harmless treatment, the air can also be discharged from the vehicle to avoid infecting more people. The following is a related introduction to negative pressure ambulances: 1. Main features: The most significant characteristic of this vehicle is negative pressure. The so-called negative pressure means using technical methods to make the air pressure inside the vehicle lower than the external atmospheric pressure, so that air can only flow from outside to inside when moving freely. Moreover, the negative pressure can discharge the air inside the vehicle after harmless treatment, preventing more people from being infected. This minimizes the chance of cross-infection among medical staff when treating and transporting patients with infectious diseases or other special conditions. 2. Purification principle: The so-called negative pressure is achieved through a self-developed negative pressure exhaust purification device, which makes the air pressure inside the vehicle lower than outside, allowing air to flow only from outside to inside. With the help of a fresh air system, fresh air is introduced, while filtration equipment is used to treat the air inside the vehicle harmlessly, minimizing cross-infection between medical staff and patients.

9

4

Share

When will Shantou implement China VI emission standards?

Shantou implemented the China VI vehicle emission standards on July 1, 2019. Below is relevant information about China VI: 1. Introduction: China VI should be denoted as 'China VI', representing the national sixth-stage motor vehicle pollutant emission standards. It refers to vehicles that comply with the 'Limits and Measurement Methods for Emissions from Light-duty Vehicles (China VI)'. 2. Main Features: The China VI-compliant engines are the first series of engines in China to meet the China VI standards, marking another instance where Yuchai leads the emission upgrade trend in China's internal combustion engine industry with multiple cutting-edge technologies. Compared to China V engines, Yuchai's China VI engines not only significantly reduce emission indicators but also show notable improvements in comfort, lightweight design, reliability, and fuel economy.

12

4

Share

What does it mean when the ABS light is on in the car?

When the ABS light is displayed in a car, it indicates a malfunction in the vehicle's Anti-lock Braking System. If the wheels lock up during emergency braking, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks. There are several states in which the ABS light may illuminate, each with different causes and solutions, as detailed below: State 1: ABS warning light stays on continuously (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage may drop below 10.5V. As the engine speed increases and the voltage rises, the ABS warning light turns off. This may also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body's wiring connector; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the fuel tank cap sticker. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal, push the brake switch linkage down fully with your finger, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary.

4

0

Share

How to Drive a Turbocharged Car More Fuel-Efficiently?

To drive a turbocharged car more fuel-efficiently, avoid sudden acceleration at startup, gently press the throttle, and reduce braking. Here are more fuel-saving tips: 1. Maintain a steady speed: The most fuel-efficient state while driving is when the car maintains a constant speed in a straight line. For cars with lower displacement, speeds between 60-80 km/h result in lower fuel consumption, while for medium-displacement cars, speeds between 80-100 km/h are relatively more fuel-efficient. Keeping the car at its economical speed is beneficial for fuel efficiency. 2. Avoid opening windows at high speeds: When driving on highways, try not to open the windows as it increases aerodynamic drag and fuel consumption. Instead, use the air conditioning's external circulation mode for ventilation. When driving above 80 km/h, the fuel consumption from open windows exceeds that of using air conditioning.

17

0

Share

What is the meaning of the gecko sticker on the back of a car?

Car owners stick a "gecko" on the back of their cars to bring good luck. Here are some related introductions about cars: 1. Body classification: Starting with the most basic body classification, this can be directly judged by the external characteristics of a car. The most common categories of passenger cars currently include sedans, sports cars, SUVs, MPVs, and several other major categories. 2. Fuel tank capacity: Fuel tank capacity refers to the volume of fuel a car can carry, usually measured in liters (L). Generally, the fuel tank capacity has a direct relationship with the car's fuel consumption. Typically, a car can travel more than 500 kilometers on a full tank of fuel. For example, a car that consumes 10 liters per 100 kilometers usually has a fuel tank capacity of around 60 liters. Each car model has a different fuel tank capacity, and even within the same category, different brands may have different fuel tank capacities, which is determined by the manufacturers.

8

2

Share

What type of oil does the Changan CS75 use?

Is It Necessary to Buy Car Seat Covers?

What is the concept of a negative pressure ambulance?

When will Shantou implement China VI emission standards?

What does it mean when the ABS light is on in the car?

How to Drive a Turbocharged Car More Fuel-Efficiently?

What is the meaning of the gecko sticker on the back of a car?

Why is the brake pedal stiff?

What are the main passive safety devices in automobiles?

Can I Use Alipay to Buy a Car?

What Causes Brake Shudder at High Speeds?