What type of oil does BMW use?

What kind of engine oil should be used for the Guangqi Honda City?

Honda City manufacturer recommends using SM grade 5W-30 semi-synthetic engine oil. More details about the Guangqi Honda City are as follows: 1. The City is equipped with Honda's 1.5L Earth Dreams engine, which provides more direct power enhancement. To improve smooth driving experience, it is paired with a CVT transmission. 2. As a sedan model derived from the Fit platform, the City offers more space compared to hatchback models, with compactness and flexibility being its greatest advantages. 3. Regarding engine oil addition, there is a difference between cold and hot engines. For a cold engine, the oil should be filled up to 80%, i.e., below the mark line, close to the mark line position. For a hot engine, it should be filled up to 50%, the middle position of the mark line. Adding too much engine oil will increase the burden on the engine.

5

1

Share

What does a black license plate mean?

Black license plates refer to plates with black background, white characters, and white borders. They are issued to foreign enterprises (including those from Hong Kong, Macau, and Taiwan), foreign and international organizations stationed in China, vehicles purchased in China by foreigners under private ownership, vehicles entering from Hong Kong, Macau (Taiwan), and foreign countries, as well as vehicles temporarily detained by customs with temporary plates or confidential institutions. Below is an introduction to license plates: (1) Large motor vehicle plates: Yellow background with black characters and black borders. (2) Small car plates: Blue background with white characters and white borders. (3) Trailer plates: Yellow background with black characters and black borders. (4) Motorcycle plates: Yellow background with black characters and black borders. (5) Light motorcycle plates: White background with vermilion characters. (6) Tractor plates: Yellow background with black characters. (7) Agricultural vehicle plates: Yellow background with black characters and black borders.

7

1

Share

What is the method to reset the maintenance light on a Mercedes-Benz E300?

There are 9 steps to reset the maintenance light on a Mercedes-Benz E300: 1. Start the vehicle and turn to the first gear: First, start the vehicle, select the first gear, and close all doors and the engine compartment; 2. Locate the dashboard and switch to the odometer: Switch the dashboard display to the odometer interface; 3. Operate on the steering wheel: Simultaneously press and hold the OK button on the left side of the steering wheel and the phone button on the right side of the steering wheel until the menu appears; 4. Enter the menu options: Three menu options will appear, select PLUS and hold the OK button to enter; 5. Select the full maintenance: Choose the full maintenance and hold the OK button to enter; 6. Choose to perform maintenance: Select to confirm the full maintenance, a pop-up will appear asking if you want to perform maintenance; 7. Hold the OK button: Hold the OK button to confirm, a pop-up will appear stating it cannot be completed; 8. Select confirm: Choose to confirm and hold the OK button; 9. Completion: The reset is completed.

18

0

Share

Do Front and Rear Brake Pads Need to Be Replaced Simultaneously?

Front and rear brake pads do not need to be replaced at the same time, as they have different replacement cycles. Generally, rear brake pads have a longer service life compared to front brake pads. Below are the conditions for replacing car brake pads: I. Normal Conditions: 1. Front brake pads typically need replacement after 30,000-50,000 kilometers of driving. 2. Rear brake pads usually require replacement after 60,000-100,000 kilometers of driving. II. Special Conditions: 1. Beginners tend to use brakes more frequently, leading to higher wear. 2. Automatic transmission vehicles consume brake pads faster than manual transmission vehicles, as gear shifting relies on the accelerator and brake pedals. 3. Vehicles primarily driven in urban areas experience faster brake pad wear compared to those driven on highways, due to more frequent braking in city traffic. 4. Heavier vehicles cause greater brake pad wear. When decelerating at the same speed, heavier vehicles have greater inertia, requiring more friction force from the brake pads, resulting in increased wear.

2

5

Share

What does stage 1 car tuning mean?

Stage 1 car tuning refers to improving engine performance by modifying ECU software parameters without changing any hardware components. Below is expanded information about stage 1 car tuning: 1. Stage 1 ECU tuning involves adding the most basic ECU program to the vehicle's original factory ECU, thereby increasing horsepower and torque. This only requires matching with the original factory hardware. 2. Stage 2 tuning refers to adapting an ECU program that has been debugged for certain modified hardware and adding it to the original factory ECU. Compared to stage 1, it significantly increases power, resulting in noticeable performance improvements. However, it may cause some damage to the car's hardware and increase the load on the components. 3. Stage 3 tuning involves extensively reprogramming the ECU, installing larger turbos and intercoolers, and replacing some high-strength parts. After such modifications, the engine undergoes substantial stress, which may shorten its lifespan to some extent.

15

3

Share

How often should the transmission fluid in a Tiida be replaced?

The replacement interval for the transmission fluid in a Tiida is 32,500 kilometers or 39 months. Transmission fluid is an oil product that maintains the cleanliness of the gear system, ensuring the proper functioning of the transmission and extending the lifespan of the transmission components. Below is an introduction to the methods for replacing the transmission fluid in a Nissan Tiida: 1. Gravity Drain: Similar to the principle of changing engine oil. Using tools to loosen the drain plug, the transmission fluid will automatically flow out under gravity. This method is the most common and easy to perform, but it cannot completely drain all the transmission fluid. Some fluid remains due to mechanical structures such as recesses and depressions that create dead spots. 2. Machine Flush: New transmission fluid is added to a flushing machine, which is connected to the transmission's fluid circuit. The pressure from the new fluid pushes out the old fluid, resulting in a cleaner flush of the fluid circuit. The more new transmission fluid used in the machine flush, the more thoroughly the old fluid is removed. A machine flush typically uses about 10-15 liters of fluid and takes approximately 1 hour to complete. 3. Oil Pan Removal: This method allows for cleaning the oil filter and flushing the oil pan, addressing the issue at its root. Removing the oil pan is a significant task, and the associated labor costs will be higher.

6

4

Share

What type of oil does BMW use?

What kind of engine oil should be used for the Guangqi Honda City?

What does a black license plate mean?

What is the method to reset the maintenance light on a Mercedes-Benz E300?

Do Front and Rear Brake Pads Need to Be Replaced Simultaneously?

What does stage 1 car tuning mean?

How often should the transmission fluid in a Tiida be replaced?

What are the six steps when first getting into the car for Subject 3?

How to Use the Cadillac Factory-installed Dash Cam?

Do new tires require wheel balancing?

How often should the coolant be replaced in a 2016 Nissan Sylphy?