What Type of Measure Does an Airbag Belong To?

2 Answers
LeonardoMarie
07/29/25 7:49am
An airbag is a passive safety system device. Reason: An airbag is an auxiliary safety protection device, and it must be used in conjunction with seat belts to be effective. The airbag is an application system, and the inflatable cushion that people commonly see is actually just the execution unit of this system. The ECU (Electronic Control Unit, often referred to as the airbag computer) is the most critical component of the airbag system. This computer is installed somewhere in the vehicle's floor and senses collision signals from the front. Reason: An automotive airbag is a passive safety protection system that, when used in conjunction with seat belts, provides effective collision protection for occupants. The collision between the vehicle and an obstacle is called the primary collision, while the collision between the occupant and the interior components is called the secondary collision. The airbag rapidly inflates a gas-filled cushion between the primary and secondary collisions, allowing the occupant, due to inertia, to "land on the cushion," thereby mitigating the impact on the occupant, absorbing collision energy, and reducing occupant injuries.
Was this review help?
19
0
Share
KingstonLynn
08/12/25 11:04am
As a seasoned car enthusiast who frequently attends auto shows, I firmly believe airbags are purely passive safety features—they don't prevent accidents but deploy automatically upon collision to protect occupants. Having driven everything from vintage classics to modern vehicles, I've witnessed their critical role; they inflate within milliseconds to cushion impact forces, minimizing head and chest injuries. Unlike active systems like ABS, airbags act as a final safety net. Especially in urban driving where rear-ends and side impacts are common, airbags work best when paired with seatbelts. Remember to routinely inspect the airbag system—sensor failures or fuse issues can render it useless. Modern vehicles feature not just frontal airbags but also side and curtain airbags for comprehensive protection. My advice? Prioritize high safety-rated models when purchasing—these lifesavers truly make a difference.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

Should the clutch be released quickly when shifting gears?

In the gear shifting exercise of Subject 3, the clutch should be released slowly. Here are the relevant details about the gear shifting exercise in Subject 3: 1. Poor clutch control can lead to rough gear changes, so the clutch should also be released slowly during gear shifting in Subject 3; 2. If the clutch is released too quickly after shifting, the gear may bounce back. Additionally, after switching gears, the clutch should be released slowly to allow the engine speed to rise, otherwise the car may shake; 3. Gear shifting should be done step by step, and rushing the process should be avoided, as any slight mistake could result in failing the test.
12
1
Share

Must Gear Shifting Be Completed Within 100 Meters?

The gear shifting exercise requires completion within 100 meters. Below are the relevant details about the gear shifting exercise: 1. Test Requirements: Gear shifting must be completed within 100 meters, with the gear sequence being 2nd gear, 3rd gear, 4th gear, and then back to 3rd gear. The process involves shifting from lower to higher gears and then back to lower gears. Different regions may have varying requirements, so it's essential to confirm with your instructor beforehand. 2. Downshifting Requirements: During driving, ensure the gear matches the speed. Shift to 1st gear at speeds of 0-10 km/h, 2nd gear at 10-20 km/h, 3rd gear at 20-30 km/h, and 4th gear at 30-40 km/h.
4
5
Share

What Causes the Fuel Gauge Needle to Stay at Full After Refueling?

When the fuel gauge displays a full state for an extended period, it could indicate a malfunction in the fuel level sensor, preventing it from reading accurate tank data. Here is relevant information about automotive fuel gauges: 1. Introduction: The vehicle fuel gauge is designed based on principles of physical mechanics and electronics. Mechanically, it determines the fuel level scale position in the tank using buoyancy theory (somewhat similar to a household toilet tank), then transmits this value to a rheostat via a sensor. By sliding on the rheostat, different voltage values are obtained, which are then converted into the scale seen on the fuel gauge. 2. Types: There are two types of fuel gauges currently used in vehicles: analog (pointer-type) and digital.
2
4
Share

What is the gear shifting rhyme?

There are two rhymes for gear shifting. Below is the related introduction to the gear shifting rhymes: 1. Rhyme one: Stop the car steadily and check the road, accelerate steadily without rush. After three meters, press the throttle once, at five meters shift to second gear, press the throttle again to keep up, the car reaches thirty kilometers per hour, shift to third, fourth, and fifth gear in sequence, clutch and gear shift must be accurate, the drive is smooth and fast. After fifth gear, downshift to fourth. Slow down and downshift to third gear, press the clutch to second gear. Right foot returns to the brake, left foot and right hand must cooperate, stop at the point without panting. 2. Rhyme two: Right first then left, act immediately, left up right down like a seesaw.
3
1
Share

What is the speed limit on the acceleration lane?

There is no minimum speed limit for the acceleration lane. Below is relevant information about acceleration lanes: 1. Introduction: An acceleration lane is a dedicated lane provided for vehicles to accelerate before merging into high-speed traffic flow. It is generally the rightmost section of road after exiting a ramp, marked with dashed lines on the ground. After accelerating, vehicles can enter the main traffic lane. The length of acceleration lanes is not fixed and needs to be calculated based on current road traffic volume and speed limits to determine an appropriate acceleration distance. 2. Requirements: After passing through a ramp exit, vehicles must first enter the acceleration lane and reach the specified speed before merging into the main traffic lane. Direct entry from the ramp exit to the main lane is prohibited and may result in penalty points.
3
1
Share

What are the three electric components of new energy vehicles?

New energy vehicles' three electric components refer to the battery, electric drive, and electric control. More information about new energy vehicles is as follows: 1. New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of on-board power devices), integrating advanced technologies in vehicle power control and driving, resulting in vehicles with advanced technical principles, new technologies, and new structures. 2. New energy vehicles include four major types: hybrid electric vehicles, pure electric vehicles, fuel cell electric vehicles, and other new energy vehicles.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.