What Type of License is a Motorcycle License?

1 Answers
Pires
07/30/25 9:14am
Motorcycle license is a Class D license. Introduction to Class D License: A Class D license allows the holder to drive three-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed exceeding 50km/h. It also permits driving two-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed exceeding 50km/h, as well as motorcycles with an engine displacement of 50ml or less and a maximum design speed of 50km/h or less. Introduction to Class E License: With a Class E license, one can legally drive two-wheeled motorcycles with an engine displacement greater than 0.5L or a speed exceeding 50km/h, and it also covers the vehicle types permitted by a Class F license. A Class F license allows the holder to legally drive light motorcycles with an engine displacement less than 0.5L or a speed below 50km/h.
Was this review help?
18
2
Share
More Forum Discussions

Why is the SINOTRUK HOWO National V urea fault light on?

There are many situations where faults may occur. The specific reasons for the fault are as follows: Unqualified urea quality: The vehicle is weak, and urea consumption is normal. After urea crystallization fails, a large amount of urea is stored in the exhaust pipe, which not only causes engine exhaust blockage and inability to work properly but also results in excessive emissions. Urea tank temperature is too high: The high temperature of the urea tank causes urea to volatilize and be discharged from the exhaust port, crystallizing around the tank. Excessive crystallization at the exhaust port leads to blockage. During the operation of the urea system, severe vacuum suction in the urea chamber causes urea pressure buildup blockage, resulting in low urea pressure faults. Insufficient power, urea pump power supply module corrosion: Urea consumption is too high or too low, urea pump pressure sensor high-pressure signal, actuator ground short circuit, urea reversing valve actuator opening, sensor power supply error. There is a large range of corrosion, causing the power module to insert the wiring harness to connect to the power supply and send incorrect voltage value signals to the ECU.
6
0
Share

Does very slow reversing into the parking space count as stopping?

No, here are the details about reversing into the parking space: The determination of stopping in Subject 2 (parking test) is based on GPS positioning, so even if the vehicle is moving as slowly as a snail, as long as it is still moving, it does not count as stopping. Moreover, the GPS can only detect a stop if the vehicle remains stationary for more than two seconds. According to the "Motor Vehicle Driver Examination Content and Methods," the reversing into the parking space task in Subject 2 must be completed within 210 seconds (3 minutes and 30 seconds). Statistics show that the average time for students to complete the reversing task is around 2 minutes, so 210 seconds is more than sufficient.
9
1
Share

What is the yellow dot on the car?

There are two possibilities, here are the details: Dust or other impurities: When driving in dusty areas, dust and impurities may accumulate on white paint surfaces. Some impurities are stubborn and cannot be removed with regular cleaning, such as tar and bird droppings. These sticky impurities require special cleaners for soaking, stain removal, and rinsing to be completely eliminated. Car rust: During windy and rainy weather, if the car is parked outdoors, the inner layer of the car cover may repeatedly whip the paint, creating numerous tiny scratches on the body. If sand and dust get inside the cover, the number of scratches increases. Over time, this can also dull the paint. Additionally, after a sandstorm, avoid using a duster or cloth to clean sand particles off the car body directly. Instead, rinse the car with water to prevent the sand particles on the duster or cloth from scratching the paint.
16
0
Share

What Brand is the Celebrity Nanny Car?

There are many brands, here is the detailed information about nanny cars: GMC SAVANA (Business Star): Many celebrities choose the GMC SAVANA (Business Star). This nanny car has a very rugged appearance, following the popular American style in design, with a total body length of six meters. The interior is fully equipped, offering excellent comfort. Mercedes-Benz V-Class: This model is 5140 mm long, 28 mm wide, 1880 mm high, with a wheelbase of 3200 mm. The overall size performance is very good, with spacious space and excellent privacy. Ford E: This nanny car belongs to the Japanese-style nanny cars, and Japanese cars pay the most attention to details, so the equipment in this nanny car is very complete. The Ford E has a body length of six meters, with a very luxurious design. The rear row design of the Ford E is the most outstanding, featuring luxurious wood trim for design and decoration, as well as electric massage chairs and aviation seats.
20
0
Share

Where are Yuanzhi tires produced?

This is a domestically produced tire. Below is the relevant introduction: Definition: Tires are the only components of a car that come into contact with the ground, and these components are crucial for the car's driving safety and stability. Tires are rubber products, and rubber products will age over time with prolonged use, so tires need to be replaced regularly. Replacement cycle: Under normal circumstances, tires installed on a car can be used for four years, so it is recommended to replace the tires every four years. Shelf life: When purchasing new tires, be sure to check the production date carefully because tires have a shelf life. Normally, the shelf life of unused tires is three years. If the tires have been in storage for more than three years, do not purchase them. After installing new tires, it is essential to perform a dynamic balance test on each wheel again.
6
0
Share

Catalytic Converter Damage and Three-Cylinder Misfire: What's the Cause?

Catalytic converter damage and three-cylinder misfire are caused by ignition coil and cylinder wire faults. Causes of three-cylinder misfire in car engines: Ignition fault: The ignition coil and high-voltage wires need to be checked. Ignition coils cannot be repaired and must be replaced if faulty. Fuel injection fault: This may be caused by wiring issues or poor fuel injection pressure. Human operation errors: Such as carelessness or mistakes during maintenance: faults caused by touching, loose connectors, etc. Wear and aging: Untimely maintenance or the use of inferior, substandard, or non-compliant engine oil. Engine fault: If the engine is faulty, it needs to be replaced promptly.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.