What Type of Gasoline Should the T-Roc Use?

1 Answers
MacSophie
07/30/25 8:19am
The T-Roc uses 92-octane gasoline. The method and basis for selecting gasoline are introduced as follows: Method for Selecting Gasoline: The difference between 92-octane and 95-octane gasoline is not significant; the main variation lies in the octane rating, which affects the anti-knock properties. The choice should be based on the engine's compression ratio. You can refer to the compression ratio specified in the vehicle's manual, and manufacturers usually indicate the appropriate gasoline grade for the vehicle in the manual. Basis for Selecting Gasoline: The engine requirements for compact cars are not very high, with compression ratios ranging between 8.6 and 9.9. Mid-size cars have engine compression ratios between 10 and 11.5. For engines exceeding 11.5, higher-octane gasoline may be considered. These engines are typically installed in luxury brand vehicles and offer very strong performance. Engines with compression ratios between 8.6 and 9.8 are suitable for 92-octane gasoline, while those with compression ratios between 10 and 11.5 are suitable for 95-octane gasoline.
Was this review help?
1
5
Share
More Forum Discussions

How Long After Car Paint Touch-Up Can It Be Exposed to Rain?

How long after car paint touch-up it can be exposed to rain depends on different situations: 1. If the painting is done in a paint booth, the car can be exposed to rain immediately after driving out; 2. If the painting is done at a professional shop, the car can be exposed to rain when the staff delivers the car; 3. If the painting is done on the same day, it needs two days before being exposed to rain; 4. At lower temperatures, it requires one week before being exposed to rain. The method for paint touch-up is: 1. Clean the area where the paint has chipped off with water; 2. Sand the chipped area with sandpaper and check by hand if the surface is smooth; 3. Cover the areas that do not need touch-up with tape; 4. Use a spray can matching the car's color to spray the chipped area.
19
4
Share

How to Eliminate the Illuminated ABS Warning Light in a Car?

ABS refers to the vehicle's Anti-lock Braking System. The illumination of the ABS warning light may indicate a malfunction in the wheel speed sensor, which can be categorized into two scenarios. The first scenario involves sensor failure causing incorrect transmission of wheel speed data, leading to discrepancies in the information received by the onboard computer, thereby triggering the ABS light. In such cases, professional repair or sensor replacement at a service center is required. The second scenario occurs when the wheel speed sensor becomes dirty, preventing accurate detection of the wheel's actual speed, which also results in the dashboard warning light. Cleaning the sensor can restore normal functionality. Additionally, a fault in the sensor wiring that disrupts data transmission to the computer system can prevent the system from recognizing the status of each wheel, causing the dashboard light to illuminate. In this situation, replacing the sensor wiring harness is the only solution. The primary function of ABS is to automatically regulate the braking force during vehicle deceleration, preventing wheel lock-up and maintaining a state of rolling and sliding. This ensures maximum traction between the wheels and the road surface. ABS enhances lateral stability during braking, improves directional control, optimizes braking efficiency, and reduces localized excessive tire wear.
2
4
Share

What causes a sudden drop in coolant level?

The reasons for a sudden drop in coolant level are: 1. Leakage; 2. Poor circulation leading to rapid consumption; 3. Coolant entering the cylinder and being burned or entering the oil pan. The method for replacing coolant is: 1. Open the vehicle's engine hood, and locate the coolant reservoir in the upper right corner; 2. Open the coolant drain plug under the radiator to drain the old coolant; 3. Add new coolant, tighten the cap, and the coolant replacement is complete. The functions of coolant are: 1. Providing anti-corrosion protection for the engine's cooling system; 2. Preventing water from boiling when the engine temperature reaches 100 degrees Celsius; 3. Preventing scale formation and avoiding reduced radiator efficiency; 4. Ensuring the engine operates normally at low temperatures.
19
4
Share

What is the difference between the Buick Regal and Regal GS?

The difference between the Buick Regal and Regal GS lies in their 0-100km/h acceleration times: the Buick Regal accelerates from 0 to 100km/h in 7.1 seconds, while the Regal GS does it in 7.2 seconds. Both the Buick Regal and Regal GS belong to the midsize car category, with body dimensions of 4913mm in length, 1863mm in width, and 1462mm in height, a wheelbase of 2829mm, and a fuel tank capacity of 60 liters. Both models are equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 237PS, a maximum power output of 174kW, and a maximum torque of 350Nm, paired with a 9-speed automatic transmission.
3
2
Share

How to Reset the Maintenance Light on a Skoda Octavia?

Skoda Octavia maintenance light reset method is: 1. Press and hold the button on the instrument panel; 2. Turn on the ignition without starting the engine; 3. Rotate the pressed button to the right once; 4. Turn on the ignition again to check if the reset is successful. If not, repeat the process. Taking the 2020 Skoda Octavia as an example, it belongs to the compact car category with body dimensions of: length 4675mm, width 1814mm, height 1460mm, and a wheelbase of 2686mm. The 2020 Skoda Octavia features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113ps, maximum power of 83kw, maximum torque of 145nm, paired with a 5-speed manual transmission.
1
4
Share

What is the ideal oil level for a car?

Car engine oil should be filled between the minimum and maximum marks on the dipstick. The method for adding engine oil is as follows: 1. Lift the vehicle, remove the undercarriage protection panel, and place a container with about 10 liters capacity below the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the drain plug after draining and wipe it with a tissue to check for leaks; 3. Reinstall the undercarriage protection panel and lower the vehicle, then use a funnel to add oil at the filler port. The functions of engine oil include: lubrication, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion prevention, shock absorption, and wear resistance. Engine oils are categorized into: mineral oil, semi-synthetic oil, and full synthetic oil.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.