···
Log in / Register

What type of gasoline should the Roewe RX5 use?

4 Answers
DeCaroline
07/29/25 10:32am

The Roewe RX5 requires gasoline with an octane rating of 92 or higher. Below are some important considerations regarding refueling: 1. Do not use low-octane gasoline: Using low-octane fuel can cause severe damage to the engine and catalytic converter, reduce engine power and torque, and increase fuel consumption. If low-octane gasoline is used, you may hear engine knocking noises. In such cases, switch to the recommended octane rating or higher as soon as possible. 2. Unusual noises when using the recommended octane gasoline: If you still hear severe knocking noises after using the recommended octane rating or higher, immediately visit an authorized after-sales service center for inspection. 3. High-octane gasoline: Using gasoline with a higher octane rating than required by the engine is permissible, but it does not provide any advantages in terms of engine output power or fuel consumption.

Was this review help?
17
4
Share
Mckenzie
08/13/25 2:49pm

I've been driving the Roewe RX5 for several years, and usually 92-octane gasoline is sufficient, which works for most models. However, the older 1.5T engine performs better with 95-octane. The key is to check the label on the fuel tank cap or the user manual—it's clearly stated there. Using the wrong gasoline grade is no small matter; if you accidentally use a lower grade, such as below 90-octane, it can easily cause engine knocking, damage the piston heads, and even affect the engine's overall lifespan. My neighbor once mistakenly filled up with low-grade fuel, and the car shook violently while driving, resulting in costly repairs. I recommend developing the habit of checking the fuel grade indicator every time you refuel to avoid major repairs later. The Roewe RX5 is a reliable daily driver—just stick to the recommended fuel grade, and it can easily last over 100,000 kilometers without major issues.

Was this review help?
11
3
Share
Expand All
Shane
10/07/25 5:33am

As a young commuter driving a Roewe RX5, I find using 92-octane gasoline the most cost-effective option—it's economical and hassle-free. Most versions of this car officially recommend 92-octane or higher unleaded fuel, and a full tank costs just around 300 yuan, saving you dozens of yuan per month compared to 95-octane. If you frequently drive long distances, stocking up when prices are low is a good idea. Don’t always listen to claims that higher-octane fuel boosts performance—I think 92-octane is perfectly adequate, with stable fuel consumption around 8 liters per 100 km. Remember to occasionally clean the fuel filler neck to prevent impurities from affecting the engine, saving both money and hassle. The Roewe RX5’s engine is designed to handle various fuel types, so don’t overthink the brand—quality is equally reliable at reputable gas stations. Keeping a fuel consumption log helps detect anomalies early, benefiting both your wallet and your car in the long run.

Was this review help?
17
5
Share
Expand All
VanSkylar
11/20/25 6:57am

The Roewe RX5 is perfectly fine with 92-octane gasoline, as most of its engines like the 1.5T and 2.0T series are compatible with this grade. The gasoline's octane rating should match the compression ratio—higher grades like 95-octane are acceptable, but never use lower grades to prevent engine knocking and damage. Always check the owner's manual or the fuel filler flap label for the manufacturer's specified requirements. Using the wrong fuel type can lead to carbon buildup in the fuel system, causing malfunctions and costly repairs. For routine maintenance, simply use quality fuel from reputable stations and avoid contaminated or substandard gasoline to keep your vehicle running efficiently.

Was this review help?
4
2
Share
Expand All
More Forum Discussions

Can Peterbilt Trucks Be Driven on Roads in China?

Peterbilt trucks can be driven on roads in China, but an A2 or A1 driver's license is required. Additional information: 1. Peterbilt: The Peterbilt 389 heavy-duty truck tractor, produced by the American company Peterbilt, played the role of "Optimus Prime" in the Transformers film series. The vehicle dimensions are 9.4 meters × 2.4 meters × 4 meters. 2. About Peterbilt Company: Peterbilt Company is a subsidiary of PACCAR Inc. Since its founding in 1939, it has established its dominance in the production of high-quality trucks in the United States. The company is headquartered in Washington State and holds about 10% of the heavy-duty truck market in the U.S. Peterbilt and Kenworth are the two flagship brands under PACCAR Inc. The perfect combination of innovation and classic design makes them the most representative American-style long-nose heavy-duty trucks.
13
4
Share

What is the difference between BMW's S gear and Sport mode?

BMW Sport mode and S gear differ in the following ways: Sport mode combines chassis and transmission programming. In high-end models abroad, Sport mode includes a heavier steering wheel, stiffer suspension, and the transmission logic shifting into S gear. However, domestic models lack dynamic chassis systems, so Sport mode only results in a heavier steering wheel and the transmission logic shifting into S gear, with Sport+ additionally disabling DSC. On the other hand, engaging S gear solely involves changes in transmission logic, specifically preventing automatic upshifting to the highest gear, shortening shift times, and reducing throttle lag. Therefore, S gear is only a part of Sport mode. Additional information: 1. Sport mode: As the name suggests, Sport mode enhances the engine's power output and driving dynamics for a more sporty experience, delivering the ultimate BMW-style driving thrill. 2. S gear: This refers to the S gear under the M/S position on the left side of BMW's electronic gear lever, also known as Sport mode, which is activated by shifting gears.
5
2
Share

How to Replace the Battery in a Jeep Electronic Key?

The method to replace the battery in a Jeep electronic key is: 1. After taking out the car key, remove the mechanical key. The mechanical key can be pulled out by pressing a small button; 2. Take out the car key and use a small flat-head screwdriver to pry open the car key. There is a small gap in the middle of the key, and it can be gently twisted open; 3. Use the small flat-head screwdriver to pry out the old battery, install the new battery, and then reassemble the key. When disassembling, be careful not to use excessive force to avoid damaging the key's shell and internal chip. Also, pay attention to the orientation of the battery when replacing it. Taking the Jeep Compass as an example, the vehicle's body dimensions are 4424mm in length, 1819mm in width, and 1635mm in height, with a wheelbase of 2636mm. The vehicle features a seven-slot chrome-plated grille flanked by square-shaped headlights and high-intensity projection fog lights, creating a streamlined and slightly aggressive front-end design.
2
0
Share

Does replacing an old ABS pump require matching?

Replacing an old ABS pump requires matching. Without proper matching, the ABS warning light will not turn off, and the part numbers must be consistent. The matching process can be efficiently completed using a 5054 tool. Additionally, both the ESP and tire pressure monitoring systems need to be configured to achieve perfect matching. How ABS works: During braking, ABS rapidly determines whether a wheel is locking up based on speed signals from each wheel speed sensor. It then closes the normally open input solenoid valve for the wheel that is starting to lock, maintaining the braking force. If the wheel continues to lock, the normally closed output solenoid valve opens, allowing brake pressure to rapidly decrease as the brake fluid flows directly to the reservoir, preventing the wheel from completely locking due to excessive braking force. This keeps the braking state at the optimal point (with a slip ratio S of 20%), ensuring the best braking performance and maximum driving safety. Classification of ABS: ABS is primarily categorized by channels. In ABS systems, brake lines that can independently regulate brake pressure are referred to as control channels. ABS systems are classified into four-channel, three-channel, two-channel, and one-channel configurations. One-channel ABS: Also known as single-channel ABS, it features a single brake pressure modulator in the rear wheel brake line and a wheel speed sensor installed on the rear axle differential (or one sensor on each rear wheel in some cases). Two-channel ABS: This configuration struggles to balance directional stability, steering control, and braking efficiency, and is rarely used today. Three-channel ABS: This system independently controls the two front wheels, while the two rear wheels are controlled together based on the select-low principle (i.e., both wheels are controlled by one channel to ensure the wheel with less traction does not lock), also known as hybrid control. Four-channel ABS: Equipped with four wheel speed sensors, this system has a separate brake pressure modulator in the brake line to each wheel, allowing independent control and forming a four-channel control configuration.
7
3
Share

Will the Car Door Lock Automatically If Not Locked?

No. Below is relevant information: How a car works: When the key is removed to cut off the power and the car door is closed, it is generally the driver who actively locks the car using the remote key. The reason is that most models on the market do not have the function of detecting the distance of the key's electronic signal. Additional information: Precautions: 1. Try to use the mechanical key to lock the car: When locking the car, it is still advisable to use the mechanical key, as this makes any signal jammer ineffective. If you don't mind the inconvenience, using the mechanical key more often can also save power and is safer than using a smart key. When using the mechanical lock, make sure the car door is properly closed and you hear the sound of the entire car locking; otherwise, it means the car was not successfully locked. 2. Try to park in a guarded parking lot and ask for a parking receipt: When parking for a long time, choose a guarded parking lot and ask for a parking receipt. This way, if any issues arise with the vehicle, you can ensure no loss occurs. However, you should still lock the car doors. Generally, in formal parking lots, criminals are less likely to enter.
16
0
Share

Is it harmful to leave the car idling for 8 hours without turning it off?

It is harmful to leave the car idling for 8 hours without turning it off. If a car remains idling for more than an hour while parked, fuel consumption will increase even though the car is not moving. Below are the issues that can arise from prolonged idling: 1. Carbon buildup: Some impurities produced during fuel combustion cannot be completely expelled and adhere to corresponding components, forming black carbon deposits. When a vehicle remains idling for an extended period, the engine continuously operates at low RPM, making the pistons and valves more prone to carbon buildup. This can lead to unstable idling and other adverse effects on engine performance, and may even impact the engine's lifespan. 2. Impact on the vehicle's lifespan: Secondly, the three-way catalytic converter does not reach its optimal operating temperature, which affects its lifespan. Most vehicles are equipped with a three-way catalytic converter in the exhaust system. This is the most important external purification device for vehicle emissions, converting harmful gases like CO, HC, and NOx from exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.