What type of gasoline should be used for the GAC Trumpchi GA6?

2 Answers
MacSpencer
07/24/25 7:13am
For normal use, the GAC Trumpchi GA6 can be fueled with 93-octane gasoline, although using 97-octane gasoline would be better. Gasoline octane ratings: Currently, gasoline available in the market comes in octane ratings such as 90, 93, 95, and 97. These numbers represent the octane rating of the gasoline, indicating its anti-knock properties, and are unrelated to the cleanliness of the gasoline. The notion that "higher-octane gasoline is cleaner" is entirely misleading. It is more scientific and economical to fuel your car according to the engine's compression ratio or the requirements specified in the vehicle's manual, as this allows the engine to perform at its best efficiency. Choosing the right octane rating: During the design phase of a car engine, the required fuel octane rating is determined based on the compression ratio. The compression ratio is a crucial structural parameter of an engine, representing the ratio of the volume of gas when the piston is at the bottom dead center (start of compression) to the volume when the piston is at the top dead center (end of compression). From the perspectives of power and fuel economy, a higher compression ratio is generally better. A higher compression ratio improves power output, thermal efficiency, and consequently enhances vehicle acceleration, top speed, and other performance metrics.
Was this review help?
20
4
Share
DianaDella
08/11/25 3:01am
As a frequent driver of the GA6, I can tell you that using regular 92-octane unleaded gasoline is perfectly fine and offers the best value for money. The engine is designed for it. Don’t fall for the myth that 95-octane or higher is better—it’s not worth the extra cost, and the performance difference is negligible. Just make sure to fill up at reputable gas stations to avoid low-quality fuel with impurities that can clog the fuel injectors. If you occasionally want to push the car, a tank of 95-octane might make acceleration feel slightly smoother, but it’s unnecessary for daily commuting. Always check the label on the fuel cap—if it recommends 92-octane, stick to it. Don’t overcomplicate things. Regularly replacing the fuel filter keeps the system clean and saves you repair costs. From my experience, consistently using 92-octane gas extends the engine’s lifespan by several years and reduces trips to the mechanic.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

Where is the Haval Hood Switch Located?

Switch is located at the lower left side of the driver's cabin. Here is more information about Haval vehicles: 1. Introduction: Haval is a sub-brand of Great Wall Motors, established on March 29, 2013. The Haval brand, primarily focused on SUV models, operates in parallel with the Great Wall brand, utilizing independent logos, product development, production, and service systems, mainly engaged in SUV production and sales. Its product lineup includes three series: H series, M series, and F series. 2. Product Planning: The Haval brand has set a detailed product plan. Currently, the H5 and H6 models are available for sale. In the next two years, eight SUV models ranging from H2 to H9 will be launched, forming the Haval brand's product sequence. Even-numbered models are positioned as urban SUVs, including H2, H4, H6, and H8; odd-numbered models are positioned as off-road SUVs, including H3, H5, H7, and H9. The Haval H9 will be a full-size SUV model, expected to be launched next year, while the new H2 and H8 will be introduced within this year.
6
5
Share

What are the methods for car tire repair?

Car tire repair methods can include patch repair, mushroom plug repair, and hot vulcanization repair. Below are detailed introductions to these repair methods: 1. Patch repair: This method involves removing the tire from the rim, locating the puncture, cleaning the surrounding area of debris, and then applying a specialized repair patch to the inside of the tire to seal the leak. The advantages of patch repair are its affordability and relatively durable repair effect, without damaging the tire tread. However, the downside is that it cannot address damage on the outer side of the tire. After prolonged high-speed driving or water exposure, the repaired area may start leaking again. 2. Mushroom plug repair: The principle is quite similar to patch repair, with the key difference being that a mushroom-shaped plug is used instead of a patch in the final step, hence the name. The advantage of this method is that it can repair both inner and outer tire damage, addressing the limitations of patch repair. It seals the puncture site, ensuring the tire's airtightness, and blocks the puncture channel, providing dual protection for the tire damage. 3. Hot vulcanization repair: This method builds on the patch repair by using a vulcanizing machine for high-temperature vulcanization treatment. The advantage of hot vulcanization repair is its superior airtightness and stronger bond between the patch and the tire. However, this method requires a higher level of technical skill. If not performed expertly, it can easily damage the tire. Therefore, this method is not suitable for passenger car tires but is more appropriate for thicker truck tires.
12
5
Share

What does it mean when the Mercedes-Benz Run-Flat Indicator stops working?

When the Mercedes-Benz Run-Flat Indicator stops working, it indicates that the pressure in at least one tire deviates from the pressure recorded during the last reset. It is necessary to check the tire pressure and perform a reset. If the tire pressure is insufficient, the dashboard will reactivate the Run-Flat Indicator. The vehicle owner should first check the pressure in all four tires. If the indicator persists after adjustments, the tire pressure needs to be restored and reset. If one or more tires have low pressure, first identify which tire(s) are affected. The recommended pressure is 2.4 bar for the front tires and 2.6 bar for the rear tires. After addressing any leaks, turn the ignition to position 2. Use the buttons on the steering wheel to access the maintenance menu on the dashboard, select 'Tire Pressure Normal,' and confirm to stop the warning. Reset method: Turn the key to position 2, use the left menu button on the steering wheel to display the odometer interface on the dashboard, then press the up button on the left side of the steering wheel; The dashboard will display 'Run-Flat Indicator Reactivated,' press the R button on the dashboard; The dashboard will show whether the tire pressure is normal; Press the plus button on the right side of the steering wheel, wait for 10 seconds, then turn off the key and restart the vehicle.
17
2
Share

How to Deregister a Vehicle When It's Not Present?

To deregister a vehicle when it's not present, you need to provide the required documentation. Below are the necessary materials and procedures for vehicle deregistration: 1. DMV Procedure: Deliver the vehicle to a scrap recycling company; Collect deregistration certificate at the service window. 2. Required Documents: Application Form for Motor Vehicle Registration, Transfer, Deregistration/Import (signed by the authorized person for institutional vehicles or by the owner for private vehicles); Original Motor Vehicle Registration Certificate; Original Motor Vehicle License; License plates; For school buses, return the school bus emblem; For scrapped vehicles, provide the original duplicate of Recycled Motor Vehicle Certificate, and for supervised scrapping, also provide the original Motor Vehicle Inspection Record Form; For lost vehicles, provide the original vehicle loss certificate; For quality-related returns, provide the original return certificate issued by the manufacturer or dealer; For vehicles no longer used domestically, provide a copy of the exit certificate or the original Notification of Entry (Exit) and License Plate Collection (Cancellation) for Customs-Supervised Vehicles of the People's Republic of China issued by customs; For revoked registrations, provide the original Public Traffic Management Revocation Decision issued by the traffic management department and the original duplicate of Recycled Motor Vehicle Certificate; For illegally assembled vehicles or those meeting mandatory scrapping standards that were confiscated and forcibly scrapped, provide a copy of the legal confiscation document and the original duplicate of Recycled Motor Vehicle Certificate; For proxy registration, also provide the agent's ID and the original legally binding written authorization from the vehicle owner.
17
0
Share

Do I need to turn on Bluetooth for ETC?

When using ETC on highways, there is no need to turn on the car's Bluetooth or mobile phone Bluetooth. The ETC junction box installed in our car has a short-distance communication response system inside, which will automatically communicate with the sensors on the road, and our car and mobile phone do not need to turn on Bluetooth. There should be about 20 domestic manufacturers. When using ETC, Bluetooth does not need to be turned on. The ETC Bluetooth switch is only used when the ETC device is activated or when the ETC is charging. It will automatically sense when passing through a highway ETC toll station, and Bluetooth does not need to be turned on all the time. ETC is the abbreviation of Electronic-Toll-Collection, meaning electronic toll collection system. To apply, you need to provide the original and photocopy of the vehicle owner's valid ID card and driving license. If it is not the owner who is applying, the agent's valid ID card is also required. The photocopy of the driving license needs to include the page with the most recent annual inspection seal; a bank card for deducting highway tolls; the applicant must be between 18 and 60 years old; and the vehicle must be under the applicant's name. How ETC works: Through the vehicle-mounted electronic tag installed on the windshield, it communicates with the microwave antenna in the ETC lane at the toll station, and uses computer networking technology to settle with the bank in the background, allowing the vehicle to pay the highway or bridge toll without stopping when passing through the toll station. Benefits of installing ETC: Saves time: Eliminates the hassle of waiting in line; Green and environmentally friendly: Green and low-carbon, vehicles pass through the toll station without stopping, reducing noise and exhaust emissions and pollution; Saves wear and tear: Saves costs, reduces the frequency of vehicle starting and braking, reduces wear and fuel consumption, and users can enjoy toll discounts; Improves efficiency: The ETC lane passage efficiency can theoretically be increased by 2-3 times or more, making traditional ETC newer, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
19
1
Share

Are Faraday Future and Ferrari related?

Faraday Future and Ferrari are not related. Below is relevant information: Introduction to Faraday Future: Faraday Future (Faraday-Future, abbreviated as FF) is a global internet-based intelligent mobility ecosystem company, aiming to provide global users with new energy, intelligent, connected, and shared products and services. The FF91 is FF's first mass-produced vehicle and flagship model, an ultra-luxury pure electric vehicle capable of autonomous driving and wireless connectivity. Introduction to Ferrari: Ferrari is a world-renowned manufacturer of racing and sports cars, headquartered in Maranello, Italy. Founded by Enzo Ferrari in 1947, it primarily produces Formula One racing cars, race cars, and high-performance sports cars.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.