What type of gasoline should be used for Geely JL7181B02?

2 Answers
AnnieMarie
07/29/25 5:49am
Geely JL7181B02 can use either 92 or 95 octane gasoline. Avoid overfilling the tank: Overfilling the gasoline tank can easily block the vent hole of the tank. Once the vent hole is blocked, the air pressure inside the tank will be lower than normal, causing poor fuel supply or even no fuel supply. Overfilling the tank also increases the vehicle's weight, thereby increasing fuel consumption. Additionally, gasoline can deteriorate, posing a safety hazard to the vehicle. Try to avoid waiting for the low fuel warning to refuel: While driving, always pay attention to the fuel gauge. When the pointer shows a quarter of the fuel remaining, you should refuel. If the tank is left empty for too long, the temperature difference inside and outside the tank can cause moisture to form inside, which can corrode the tank, affect fuel quality, and increase the engine's burden.
Was this review help?
20
2
Share
DelNova
08/12/25 9:21am
I'm a Geely owner, and my car is from the Emgrand series, similar to the JL7181B02 model. Generally, using 92-octane gasoline is fine—it's economical and practical. There's a sticker on the fuel cap indicating the recommended octane rating, such as 92 or 95, so I suggest you check it to confirm. Using 92-octane daily is quite fuel-efficient, and my family saves a lot on monthly fuel costs. If the manual says 95-octane is acceptable, trying it out might be a good idea—the engine could run smoother. But avoid using 87-octane or lower-grade fuel, as it may cause knocking and damage the car. During regular maintenance, inspect the fuel system—for example, clean the fuel injectors every 20,000 kilometers to extend the engine's lifespan. Before long trips, filling up with 95-octane can enhance performance and add some driving fun. Safety comes first—don’t risk using low-quality fuel just to save money. Always refuel at reputable gas stations to avoid future repair hassles.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What are the differences between the Prado and Land Cruiser?

The differences between the Prado and Land Cruiser are: 1. Different exterior designs: The Prado's front grille is vertical, while the Land Cruiser's front grille is horizontal. 2. Different engine displacements: The Prado comes with two displacement options, 2.7L and 4.0L, whereas the Land Cruiser offers three options: 4.0L, 4.6L, and 5.7L. 3. Different off-road capabilities: The Prado is equipped with two differential locks, while the top-tier Land Cruiser has three. 4. Different body dimensions: The Prado measures 4840mm in length, 1885mm in width, and 1890mm in height, with a wheelbase of 2790mm; the Land Cruiser measures 5095mm in length, 1975mm in width, and 1930mm in height, with a wheelbase of 2850mm.
15
3
Share

What are the causes of engine stalling?

Engine stalling can be caused by: 1. Abnormal resistance in the crankshaft position sensor, leading to the loss of crankshaft speed signal when the engine is hot, resulting in stalling; 2. Changes in the resistance of the fuel pump due to prolonged operation, causing it to fail to provide normal fuel pressure and leading to stalling; 3. Ignition system failure or overheating of the ignition module, preventing normal operation and causing stalling; 4. Abnormal throttle signal voltage causing the engine to stall while driving; 5. Loose wiring connections leading to intermittent engine stalling. Methods to address engine stalling include: 1. Checking if the fuel tank has sufficient fuel; 2. Inspecting whether the filter is clogged; 3. Verifying if the battery is supplying power; 4. Checking if the fuel pump is delivering fuel.
17
2
Share

Does the Toyota Reiz have a 3.0 version?

The Toyota Reiz does have a 3.0 version, which is a mid-size car. Taking the 2013 Toyota Reiz Zunrui Navigation Edition as an example, its body dimensions are: length 4750mm, width 1795mm, height 1450mm, wheelbase 2850mm, fuel tank capacity 70l, and curb weight 1595kg. The 2013 Toyota Reiz Zunrui Navigation Edition features a double-wishbone front suspension and a multi-link independent rear suspension. It is equipped with a 3.0L naturally aspirated engine, producing a maximum horsepower of 227ps, maximum power of 167kw, and maximum torque of 293nm, paired with a 6-speed automatic transmission.
4
4
Share

What is the reason why the Mercedes-Benz C-Class's mirrors do not fold when the car is turned off?

The reasons why the Mercedes-Benz C-Class's mirrors do not fold when the car is turned off are: 1. The mirror folding function is turned off in the settings; 2. A door is not properly closed; 3. The engine is not turned off or there is a mechanical or electrical fault. Taking the 2021 Mercedes-Benz C200L as an example, it is a mid-size car with body dimensions of length 4784mm, width 1810mm, height 1457mm, a wheelbase of 2920mm, and a fuel tank capacity of 66L. The 2021 Mercedes-Benz C200L has a multi-link independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine with a maximum horsepower of 156PS, a maximum power of 115kW, and a maximum torque of 250Nm, matched with a 9-speed automatic transmission.
14
0
Share

How Many Kilometers Should You Drive Before Replacing Tires?

Tires should be replaced after driving 80,000 to 100,000 kilometers. The functions of tires are: 1. Supporting the entire weight of the vehicle and bearing the load of the car; 2. Transmitting traction and braking torque to ensure the adhesion between the wheels and the road surface; 3. Reducing and absorbing vibrations and impact forces during driving, preventing severe vibrations and premature damage to car components; 4. Adapting to the high-speed performance of the vehicle and reducing driving noise, ensuring safety, handling stability, comfort, and fuel efficiency. Methods for tire maintenance include: 1. Regularly cleaning stones stuck in the tire treads; 2. Minimizing exposure to direct sunlight; 3. Promptly checking tire pressure; 4. Paying attention to suspension maintenance; 5. Regularly inspecting front wheel alignment.
9
2
Share

What are the causes of high water temperature?

The causes of high water temperature are: 1. Scale deposits in the radiator and engine water jacket, leading to poor heat dissipation and rising water temperature; 2. Damaged thermostat, preventing coolant from circulating into the radiator; 3. Damaged water pump or slipping drive belt causing poor water pump performance; 4. Insufficient antifreeze leading to poor engine heat dissipation; 5. Cooling fan malfunction or low speed. The solutions for high water temperature are: 1. Clean the scale deposits in the engine; 2. Inspect or replace the thermostat; 3. Inspect or replace the water pump; 4. Add antifreeze to the engine; 5. Check the cause of fan malfunction or low speed.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.