···
Log in / Register

What Type of Gasoline is Suitable for the Sylphy?

4 Answers
MaxMarie
08/30/2025, 11:58 PM

The Sylphy is suitable for 92-octane gasoline, as its compression ratio is 9.8. Gasoline engines with a compression ratio above 9.0 should use 92-octane fuel. Taking the 2021 Sylphy as an example, it belongs to the compact car category, with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, a wheelbase of 2700mm, front and rear track widths of 1540mm, a fuel tank capacity of 50 liters, and a trunk capacity of 510 liters. The 2021 Sylphy is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, a maximum power of 90kW, and a maximum torque of 155Nm, paired with a 5-speed manual transmission.

Was this review help?
18
4
Share
CarlosMarie
09/12/2025, 03:17 AM

I've been driving a Sylphy for several years and often think about refueling. It's a fuel-efficient Japanese car, and the official manual clearly recommends using 92-octane gasoline. 92-octane has a moderate octane rating, which matches the design of the Sylphy's engine. Since the compression ratio isn't high, there's no need to waste money on higher octane fuel. Using 95 or 98-octane won't cause major issues, but it's purely unnecessary—costing more without real benefits and potentially leading to incomplete combustion and increased carbon buildup. I've tried higher-octane fuel a few times and didn't see any noticeable improvement in fuel efficiency. Instead, it cost me extra cents per liter, adding up to unnecessary long-term expenses. The Sylphy's engine is well-optimized—92-octane is perfectly sufficient, whether for highway or city driving, and it keeps maintenance costs low. In short, sticking to 92-octane for this model is the smartest choice—saving money and ensuring peace of mind.

Was this review help?
2
0
Share
Expand All
LaAvery
10/26/2025, 04:08 AM

As someone who commutes daily in a Nissan Sylphy, I find that 92-octane gasoline works perfectly fine. It's affordable, available at almost every gas station, and a full tank can easily cover over 500 kilometers without any noticeable jerking. When friends driving other cars ask, I always tell them the Sylphy is designed for 92-octane fuel—there's no need to go for higher grades. I once mistakenly filled up with 95-octane and noticed no difference; the engine remained just as quiet. The key is to choose reputable gas stations to avoid fuel quality issues affecting your car. The Sylphy runs smoothly, and 92-octane is more than sufficient for daily use. Just remember to check the fuel gauge regularly and don't overcomplicate things with the fuel.

Was this review help?
13
2
Share
Expand All
LouisMarie
12/09/2025, 03:28 AM

I just learned to drive and bought a Nissan Sylphy, and I started worrying about refueling. After checking the user manual and consulting experienced drivers, they all said that using 92-octane gasoline is the most suitable. The Sylphy's engine isn't that delicate, and using lower-octane fuel won't harm its performance. New drivers often misunderstand that higher-octane fuel is better, but 92-octane is economical and sufficient. The money I save on fuel each month can be used for car maintenance, such as changing the engine oil. The Sylphy's engine is highly efficient, and 92-octane burns cleanly, reducing pollution. Simply put, following the official recommendation is always the right choice.

Was this review help?
2
0
Share
Expand All
More Forum Discussions

What is the reason for the red light flashing on the dashboard of the Haval H2 after turning off the engine?

The red light flashing on the dashboard of the Haval H2 after turning off the engine indicates that the anti-theft system is active, which is the engine electronic anti-theft system engaging. This is a normal phenomenon. Each key is embedded with an anti-theft transponder. When the key is inserted into the ignition switch lock cylinder and turned to the ON position, the electronic anti-theft ECU communicates with the key via radio frequency. If the key is confirmed to be legitimate, the anti-theft ECU will perform a password verification with the engine ECU. If the password verification is correct, the engine will be allowed to start. The Haval H2 is a compact SUV launched by Great Wall Motors, with a body length, width, and height of 4335mm, 1814mm, and 1695mm respectively, and a wheelbase of 2560mm.
18
4
Share

What are the steps to remove the rear bumper of the Changan Eado?

The steps to remove the rear bumper of the Changan Eado are: 1. Open the trunk and locate the plastic screws securing the rear taillights. Unscrew them counterclockwise by hand. 2. Disconnect the wiring harness connector of the rear taillight, then remove the screws and wiring harness. 3. Remove all screws securing the bumper and gently pull outward to detach the rear bumper. Taking the 2020 Changan Eado as an example, it is a compact car with body dimensions of 4730mm in length, 1820mm in width, and 1505mm in height, with a rear track width of 1566mm. The 2020 Changan Eado is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 158PS, a maximum torque of 260Nm, and a maximum power of 116kW.
2
3
Share

What Causes High Temperature in the Inspire Transmission?

Reasons for high temperature in the Inspire transmission: Overheating usually occurs in dual-clutch transmissions, where high temperatures can burn the friction plates and steel plates. A small portion of CVT transmissions may also experience this issue, leading to scorching of the pressure cylinder and chain. For diagnosis, check the lubricant level after the vehicle has been stationary for a while to allow the oil foam to dissipate. If the oil quality is poor, it should be replaced. Solutions for high temperature in automatic transmissions: 1. High engine coolant temperature affects transmission cooling. Solution: Repair the engine. 2. Clogged radiator grille. Solution: Clean the radiator. 3. Slipping transmission clutch generates additional heat. Solution: Repair the coupling. 4. Insufficient flow in the transmission cooling oil circuit. Solution: Repair the valve body or replace the oil pump. 5. Thermostat sticking. Solution: Replace the thermostat.
14
3
Share

What to Do If Too Much Antifreeze Is Added?

If too much antifreeze is added, simply pour out a small portion. Adding too much antifreeze has no significant impact on the car, but the reservoir may overflow, corroding surrounding metal components. It is recommended to drain the excess antifreeze and store it separately for future use. Antifreeze is a coolant with anti-freezing properties, preventing the coolant from freezing in cold winter conditions, which could otherwise crack the radiator or damage the engine block or cylinder head. Adding antifreeze to the radiator water turns it into a mixed solution, lowering the freezing point and making it less prone to freezing. Additionally, its boiling point is relatively higher, reducing water evaporation in summer and enhancing the engine cooling effect. Antifreeze also has anti-corrosion properties, preventing radiator corrosion and lubricating the water pump bearings.
12
5
Share

What is the suitable RPM for starting with a CVT?

Starting RPM depends on how hard the driver presses the accelerator. If pressed firmly, starting RPM between 4000 and 5000 is completely normal. The harder the accelerator is pressed, the higher the rebound RPM will be, and vice versa. There are no actual gears. At 2000 RPM, the car can run at 10 km/h, just start moving, or even reach 100 km/h or 150 km/h. It adjusts automatically. Additional information: CVT: Typically refers to a type of automotive transmission, also known as a continuously variable transmission. The difference between a CVT and a geared transmission is that its gear ratio is not a series of discrete points but a continuous range of values, which provides good fuel economy, power performance, and smooth driving, while also reducing emissions and costs.
2
0
Share

How long does it take to replace a battery at a 4S shop?

Half an hour. Generally, the service life of batteries manufactured by automobile manufacturers is about 2-3 years, and car owners can use this to judge the aging degree of the battery. In addition, if car owners have good driving habits and pay attention to car maintenance and protection of car parts in daily life, the service life of the battery will be extended to a certain extent. Battery replacement matters: 1. Confirm the installation position of the battery: Most models are installed in the engine compartment or luggage compartment, and a few models are installed in the cockpit. Take corresponding body protection measures at the corresponding position. 2. Remove the battery protective cover: Use a multimeter to measure the voltage between the two poles, or check the battery status through the observation hole, and explain these situations to the customer.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.