···
Log in / Register

What type of gasoline does the T-Roc use?

4 Answers
SanAnna
08/26/25 4:36am
The T-Roc uses 95-octane gasoline. Precautions for refueling include: 1. Choose to refuel when the temperature is relatively low; 2. If the car is not used for a long time or used infrequently, keep a small amount of fuel; 3. Avoid refueling when a tanker truck is unloading fuel; 4. Turn off the engine when refueling a gasoline car; 5. Do not mix gasoline of different octane ratings. Taking the 2021 T-Roc as an example, it belongs to the compact SUV category, with body dimensions of: length 4318mm, width 1819mm, height 1582mm, and a wheelbase of 2680mm. The 2021 T-Roc features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, and is paired with a 7-speed dual-clutch transmission.
Was this review help?
4
1
Share
MacJoseph
09/08/25 6:05am
I've been driving the Volkswagen T-Roc for a while now, and I usually fill it with 95-octane gasoline. The engine runs smoothly with ample power. The higher octane rating of 95 provides better anti-knock performance, offering strong protection for turbocharged engines, especially when accelerating or overtaking. While 92-octane is cheaper, it may cause knocking, leading to more carbon buildup over time, which could result in higher maintenance costs. I recommend making it a habit to use 95-octane fuel and choosing reputable gas stations for reliable fuel quality—avoid saving money by opting for off-brand fuel. During regular maintenance, have the fuel system and carbon deposits checked; technicians can optimize engine performance. Additionally, driving techniques also affect fuel consumption. Smooth starts and fewer sudden brakes can help save fuel and extend the car's lifespan.
Was this review help?
13
5
Share
Expand All
Ellen
10/22/25 6:09am
From my years of driving experience, cars like the T-Roc are best suited for 95-octane gasoline due to their high engine compression ratio compatibility. Using 95-octane fuel prevents knocking and ensures stable engine operation, avoiding damage. While switching to 92-octane may work short-term, it leads to reduced power, increased fuel consumption, and significant risks. Owners should regularly check fuel quality and clean carbon deposits every six months to prevent premature wear. Combining safe driving with maintenance—such as gently pressing the accelerator for steady speeds—enhances fuel efficiency and reduces emissions. This approach maintains car condition while saving money and hassle.
Was this review help?
20
1
Share
Expand All
RichardDella
12/05/25 6:33am
As a technology enthusiast, I emphasize the significant advantages of using 95-octane gasoline for the T-Roc. The octane rating determines combustion stability, and 95-octane matches high-compression ratio engines to prevent knocking, enhancing performance output and fuel efficiency. Compared to 92-octane, incomplete combustion leads to power loss and increased fuel consumption. Choosing higher-grade fuel wisely, combined with modern engine ECU tuning, optimizes the driving experience.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

What are the consequences of not signing after the Subject 2 driving test?

Not signing after the Subject 2 driving test has no impact. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. Subject 2 assessment criteria: The full score is 100 points, with evaluation standards set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. Meeting the requirements means passing the test. The test content for small cars, small automatic transmission vehicles for disabled passengers, and low-speed trucks includes reverse parking, hill start, parallel parking, curve driving, and right-angle turns. For small automatic transmission vehicles, the test includes reverse parking, parallel parking, curve driving, and right-angle turns. Signing for confirmation is a standard procedure in the driver's license test, and candidates should cooperate. If there are objections to the results, they can be raised through the proper procedures. According to current regulations, whether the test results are pass or fail, candidates must sign for confirmation. Post-Subject 2 test preparations: If the test is passed, after signing for confirmation, the next subject test can be scheduled until all subjects are completed and the driver's license is obtained. If the test is failed, after signing for confirmation and paying the retest fee, the candidate can reschedule the same subject test after ten days.
7
5
Share

Where is the motorcycle ignition coil located?

The motorcycle ignition coil is installed under the motorcycle seat. The working principle of the motorcycle ignition coil is: By using the ignition coil to boost the ignition pulse to approximately 14kV, it heats up the spark plug to generate a discharge spark, igniting the mixed gas. The combustion and explosion of the gas produce thrust, which powers the motorcycle. The function of the motorcycle ignition coil: It is used to receive and store the ignition voltage provided by the magneto and precisely calculate the ignition timing, supplying it to the high-voltage coil. When the high-voltage coil amplifies the voltage and supplies it to the spark plug for ignition, the spark ignites the mixture of fuel and air, causing an explosion that pushes the piston to move up and down within the cylinder, thereby starting the motorcycle engine.
17
4
Share

What Causes Fogging Inside Car Lights?

Temperature differences and improper car washing or wading through water can cause fogging inside car lights. Fogging due to temperature differences: A vent pipe is installed on the rear cover of the headlight assembly, allowing hot expanding gases to escape. However, sometimes moisture can enter this vent pipe, causing slight fogging. This phenomenon typically occurs in winter, rainy seasons, or foggy weather. Fogging caused by car washing or wading: Besides temperature differences, improper car washing or wading through water is a more common cause of fogging inside headlights. When cleaning the engine, use a damp cloth instead of a high-pressure water jet. Methods to remove fogging inside car lights: When drivers notice fogging inside the lights, they should first determine the cause. If it's due to temperature differences or humidity—for example, after prolonged use of the lights at night—the fogging will usually dissipate after turning on the low or high beams for about 10 minutes. For fogging caused by car washing or wading, promptly turn on the lights to allow the moisture to evaporate. Drivers should not ignore persistent fogging and should regularly check the condition of their car lights.
12
0
Share

What are the national standards for inventory vehicles?

There are no relevant national regulations specifying how many months a vehicle must be unsold to be considered an inventory vehicle. Introduction to inventory vehicles: This is a term used in the automotive sales industry, referring to new vehicles that have remained unsold for an extended period after leaving the factory. Generally, domestic or joint-venture vehicles unsold for more than three months after production are considered inventory vehicles. Imported vehicles, due to the longer time required for transportation, customs clearance, and entry procedures, have a more lenient time limit, typically being classified as inventory vehicles only after being stored for over six months. Disadvantages of inventory vehicles: After leaving the factory, various fluids, electronic components, batteries, rubber seals, and tires in new vehicles may deteriorate due to prolonged storage without periodic inspection and maintenance, leading to issues like moisture damage and aging.
17
4
Share

What is the difference between tires 97h and 97v?

The difference between tires 97h and 97v is that 97h indicates the load index and speed rating of the tire, while 97v represents the load index and speed rating of the vehicle tire respectively. Below is relevant information about tire specifications: Tire specifications are commonly represented by a set of numbers. The first number indicates the tire section width, and the second number represents the rim diameter in inches. For example, 165/70R14 means a radial tire with a section width of 165 millimeters, an aspect ratio of 70, and a rim diameter of 14 inches. Some tires may also include other letters or symbols with special meanings: "X" indicates a high-pressure tire; "C" indicates a reinforced type; "B" indicates a bias-ply tire; "-" indicates a low-pressure tire. M and S are abbreviations for Mud and Snow in English, indicating that the tire is suitable for use on snowy and muddy roads. Tire model numbers are mostly marked as follows: 215/70R15. The meanings of these numbers are: 215 represents the tire section width in millimeters; 70 is the aspect ratio, which is the ratio of the tire sidewall height to the tire section width, with 70 representing 70%; R is the abbreviation for Radial, indicating that the tire has a radial structure; 15 is the outer diameter of the rim in inches.
19
4
Share

Can I Renew My Car Insurance After a One-Year Lapse?

Car insurance can be renewed after a one-year lapse. Most insurance companies consider a lapse of more than three months as a new policy. Even if there were no claims in the previous year, discounts are calculated as a new policy after a three-month lapse, typically around an 85% rate. Risks of not renewing car insurance on time: Regardless of the reason, if the compulsory traffic insurance expires and the driver fails to renew it but continues to drive, once caught, according to the "Regulations on Compulsory Traffic Accident Liability Insurance for Motor Vehicles," the traffic management department of the public security organ will impound the vehicle, notify the owner or manager to insure it as required, and impose a fine of twice the minimum liability limit premium that should have been paid. If the vehicle reaches the renewal time but the driver delays or neglects to renew, they may face a premium rate increase upon renewal. Additionally, vehicles with lapsed insurance require a new inspection before renewal, adding to the procedures and causing more inconvenience. Not renewing car insurance on time poses safety risks. Many drivers are unaware of the hidden dangers of lapsed insurance. If an accident occurs during the lapse period, all losses must be borne by the driver. In cases involving luxury cars or major accidents, uninsured drivers will have to pay hefty compensation out of pocket.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.