What type of fuel should be used for the 2021 Teana?

1 Answers
McSimon
07/29/25 11:58pm
The Nissan Teana has a fuel tank capacity of 61.3 liters, and the manufacturer recommends using 95-octane gasoline. 95-octane gasoline is composed of 95% isooctane and 5% n-heptane, while 92-octane gasoline consists of 92% isooctane and 8% n-heptane. The higher the purity of isooctane, the stronger the gasoline's anti-knock performance, and consequently, the higher the price. Precautions for refueling the Nissan Teana: 1. Prevent safety hazards: Ensure the fuel nozzle is fully inserted into the fuel tank. 2. After refueling, make sure the fuel tank cap is properly closed: To avoid accidents caused by evaporation or spillage. 3. All passengers should exit the vehicle during refueling: If entering the vehicle is unavoidable, ensure the doors are tightly closed. Static electricity is highly likely in winter, so remove static electricity before refueling. 4. Turn off all electronic devices during refueling: To prevent fires or more severe disasters. 5. No open flames should be present during refueling: To prevent fuel explosions. 6. If the remaining fuel is below 1/4: Refuel at the nearest gas station as soon as possible to avoid breakdown.
Was this review help?
14
5
Share
More Forum Discussions

Is the Honda Civic equipped with a large or small CVT?

Honda Civic is equipped with a large CVT transmission. Below is relevant information about automotive CVT transmissions: 1. Advantages: CVT transmissions are compact, structurally simple, easy to maintain, and provide smooth operation. They are primarily used in Japanese, Korean, and some domestic vehicles. CVT transmissions allow the engine to operate within an optimal RPM range, making vehicles equipped with them generally more fuel-efficient. 2. Disadvantages: The drawbacks of CVT transmissions include low torque capacity and a tendency to slip. Therefore, CVT transmissions are typically paired with small-displacement engines, as larger-displacement engines produce higher torque and require AT transmissions.
20
2
Share

Does the Engine Cover Affect Heat Dissipation?

Engine covers do not affect heat dissipation. They serve to streamline airflow, enhance the aesthetics of the engine compartment to some extent, and also isolate the noise generated by the engine during operation, thereby improving driving comfort. Additionally, engine covers help reduce noise produced during engine operation and maintain cleanliness in the engine compartment. Engines are applicable both as power-generating devices and can refer to the entire machine including the power unit (such as gasoline engines, aircraft engines). Their types include internal combustion engines (e.g., gasoline engines), external combustion engines (e.g., Stirling engines, steam engines), gas turbines (used in racing cars), electric motors, etc.
13
2
Share

Does Impurity in Transmission Fluid Have an Impact?

Transmission fluid with impurities does have an impact. Below are the specific functions of automotive transmission fluid: 1. Improved shifting performance: It enables smoother and more seamless gear changes, enhancing driving control. 2. Reduced corrosion: It provides excellent oxidation resistance, minimizing component rust. 3. Extended lifespan: It offers optimal protection for gear assemblies, delivering the best anti-wear effects and prolonging the life of automatic transmissions. When changing transmission fluid, it is essential to choose high-quality branded transmission fluid, which effectively protects gears, reduces wear, facilitates smoother vehicle operation, saves fuel, extends the service life of the fluid, and lowers maintenance and repair costs.
7
3
Share

What are the levels of autonomous driving?

Autonomous driving can be divided into Level 0, Level 1, Level 2, and Level 3. Autonomous driving refers to a vehicle's ability to perceive its surroundings and make control decisions through various sensors (radar, cameras, LiDAR, etc.) installed on the vehicle body, enabling it to drive "without driver intervention". Definition of Level 0: No automation. The driver must always be in full control of all mechanical and physical functions of the vehicle, with only warning systems available. Definition of Level 1: Driver assistance. The driver operates the vehicle, but certain systems can sometimes intervene, such as Electronic Stability Program (ESP) or Anti-lock Braking System (ABS) to enhance driving safety. Definition of Level 2: Partial automation. The driver remains primarily in control, but the system can automate certain functions to significantly reduce the driver's workload. Examples include Adaptive Cruise Control (ACC) combined with automatic following and lane departure warning, as well as Autonomous Emergency Braking (AEB) which integrates technologies from blind spot detection and collision avoidance systems. Definition of Level 3: Conditional automation. The driver must be ready to take control at any time. During autonomous driving assistance, the driver may be temporarily relieved of certain tasks, such as following traffic. However, when the vehicle detects a situation requiring driver intervention, it will immediately prompt the driver to take over. The driver must be prepared to handle situations beyond the system's capability.
13
0
Share

Where is the OBD2 port located on the Emgrand GS?

The OBD2 port of the Emgrand GS is located in a concealed area on the left side near the base of the steering column on the driver's side. To find it, open the driver's door, crouch outside the vehicle, and bend down to look under the dashboard. Definition of OBD: As an abbreviation for a proprietary term, its full name is OnBoard Diagnostics, which means: On-Board Diagnostic System. This system can monitor the working conditions of the engine's electronic control system and other functional modules of the vehicle in real-time during operation. If any abnormal conditions are detected, it determines specific faults based on specific algorithms and stores them in the system's memory in the form of Diagnostic Trouble Codes (DTCs). The useful information obtained from the system's self-diagnosis can assist in vehicle maintenance and repair. Technicians can use the vehicle's original factory-specific instruments to read the fault codes, enabling quick fault localization to facilitate vehicle repairs and reduce manual diagnostic time. How OBD Works: The OBD device monitors multiple systems and components, including the engine, catalytic converter, particulate trap, oxygen sensors, emission control system, fuel system, EGR, etc. OBD connects various emission-related component information to the Electronic Control Unit (ECU), which has the capability to detect and analyze emission-related faults. When an emission fault occurs, the ECU records the fault information and related codes and issues a warning through the malfunction indicator light to inform the driver. The ECU ensures access to and processing of fault information through a standard data interface.
11
0
Share

How to remove the rear seat backrest of a Hyundai?

Method for removing the rear seat backrest of a Hyundai: 1. Remove the clip at the headrest rod, then remove the screw fixing the right side of the rear seat backrest; 2. Next, remove the screw fixing the middle of the rear seat backrest, followed by the screw fixing the left side of the rear seat backrest; 3. After all screws are removed, hold the lower part of the rear seat backrest with your hands and lift it upwards to detach the lower part of the rear seat backrest; 4. Then, hold the upper part with your hands and gently pull it outward to remove the upper part of the rear seat backrest. Hyundai has established a complete vehicle production plant in St. Petersburg, Russia. Following the Czech Republic and Turkey, Hyundai has set up a local factory in Russia, completing the Hyundai Motor Group's production system across the entire European continent and accelerating the pace of expanding into the European market.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.