What type of fuel does the C200 use?

1 Answers
RubyDella
07/29/25 11:54pm
The C200 uses 95-octane fuel. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. The C200 is a mid-size sedan under Beijing Benz, with body dimensions of 4526mm in length, 1728mm in width, and 1427mm in height, a wheelbase of 2715mm, and a fuel tank capacity of 62 liters. The C200 is equipped with an inline 4-cylinder turbocharged engine, paired with a 6-speed automatic transmission, delivering a maximum power at 5500 RPM and a maximum torque between 3000 to 4000 RPM.
Was this review help?
16
1
Share
More Forum Discussions

How to adjust the time on a Cruze car?

Method to adjust the time on a Cruze car: 1. Press the one-touch start button on the vehicle's center console to power on the instrument panel; 2. Select and press CONFIG in the center console settings to enter the vehicle parameter settings, then choose the first option; 3. Press the SET button on the left side of the steering wheel; 4. Use the up and down toggle buttons on the right side of the steering wheel to adjust the vehicle time; 5. Press the OK button on the steering wheel to confirm the changes. The Cruze is a compact car under SAIC-GM Chevrolet, with dimensions of 4666mm in length, 1807mm in width, 1460mm in height, and a wheelbase of 2700mm. The Cruze offers six body colors: Aurora White, Obsidian Black, Cold Platinum Silver, Glacier Blue, Titanium Gray, and Flame Red, along with four interior color options: Starry Deep Gray, Brocade Deep Gray, Elegant Gray-Black, and Saddle Brown. The Cruze is equipped with two engine options: a 1.5L and a 1.4T, paired with a 7-speed dual-clutch transmission and a 6-speed automatic manual transmission respectively.
10
4
Share

How to Verify if a Car is New?

Methods to verify if a car is new: 1. Check the exterior. When selecting a new car, you can request two vehicles of the same model for comparison. Observe the bumpers, body panel gaps, paint finish, door gaps, and front/rear bumper gaps. Open the doors to check for any color difference between interior and exterior paint. 2. Inspect the engine. The exterior should be free of oil stains, and the engine should run smoothly without shaking, sharp noises, or irregular frequency sounds. 3. Examine the ground. After starting the engine, check underneath the vehicle for any water or oil stains. 4. Check the interior. It should be clean and tidy without stains. Verify the functionality of interior lights, original leather seat covers, and easily damaged components like cup holders and sunglass compartment lids. 5. Take a test drive. 6. Verify that the tool kit, vehicle documentation, and the VIN code on the certificate of conformity match the engine number and original vehicle.
11
0
Share

What is the difference between 0w40 and 5w40 engine oil?

The difference between 0w40 and 5w40 engine oil lies in their state at low temperatures: 0W40 means the oil remains liquid at minus forty degrees Celsius and will solidify below that temperature; 5w40 means the oil remains liquid at minus thirty-five degrees Celsius and will solidify below that temperature. W40 indicates a viscosity range between 12.5 and 16.3, where 0 represents minus forty degrees Celsius and 5 represents minus thirty-five degrees Celsius. The number before W indicates low-temperature tolerance—the smaller the number, the lower the low-temperature viscosity and the better the low-temperature fluidity. The number after W represents the SAE viscosity range—the larger the number, the thicker the oil, and the higher the summer temperature it can withstand.
11
2
Share

How to Defrost Car Windows in Winter?

Methods to defrost car windows in winter: 1. Use the car's defogging function to remove frost. After starting the car, turn on the air conditioning defogging function to blow away the frost on the windows; 2. Purchase a defogging spray. Spray the defogging agent on the inner surface of the window to prevent frost formation. One application of the defogging spray can prevent fogging for ten days; 3. If the frost is not too heavy, open the window slightly to allow air convection inside the car, which will also disperse the frost; 4. If frost forms while parked, rinse with warm water or start the car and turn on the hot air conditioning to blow on the windows for a while; 5. If frost forms while driving, wipe it off with a clean cloth or newspaper. When starting the car, slightly lower the two front windows to reduce the interior temperature. Once the car warms up, switch the mode to internal circulation, adjust the blower to hot air, and direct it to blow on the windows.
13
0
Share

How to Turn on the Car Air Conditioner?

Method to turn on the car air conditioner: 1. Start the car, turn the temperature control knob to the cold side (blue end), turn on the AC switch and the fan (with settings 1-4), and you can also turn on the internal circulation; 2. In winter, turn the temperature control knob to the hot side (red end) and turn on the fan switch to get warm air. Method to turn off the car air conditioner: Set the fan speed switch to 0 to turn off the air conditioner. If the owner wants to turn off the cooling function while keeping the fan on, simply turn off the separate cooling switch. If you want the car air conditioner to produce heat in winter, switch the cooling/heating conversion switch to the heating area, turn on the fan switch, and adjust the fan speed to the desired setting. When heating, the cooling switch must be in the off state.
3
4
Share

What Happens When the Controller is Broken?

When the controller is broken, the vehicle may become unable to move or experience weak driving performance, resulting in difficulty starting or pushing. The electric vehicle controller is a core component that manages the motor's start, operation, direction, speed, stop, and other electronic functions. If the controller fails, it will affect the normal use of the vehicle. Common failures in electric vehicle controllers include damage to high-power components like power transistors and capacitors. A damaged power transistor, often referred to as a 'blown transistor,' can prevent the vehicle from moving, cause the dashboard power light to flicker or stay off, and create resistance in the motor, making it hard to push. Additionally, a faulty controller may lead to short circuits, blown fuses, or tripped circuit breakers.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.