What type of four-wheel drive system does the Haval H9 use?

1 Answers
FelicityLynn
07/30/25 2:39am
Haval H9 adopts an on-demand four-wheel drive system. The on-demand four-wheel drive only switches to four-wheel drive when necessary, while remaining a two-wheel drive system under other circumstances. The system automatically switches between two-wheel drive and four-wheel drive modes based on the vehicle's driving conditions, without requiring manual operation. The Haval H9 is a mid-to-large-sized SUV, equipped with a 2.0-liter turbocharged engine across the entire lineup. It delivers a maximum power of 165 kW and a peak torque of 385 Nm, with the maximum power achieved at 5,500 rpm and the peak torque available between 1,800 to 3,600 rpm. The engine features dual VVT technology and direct fuel injection, utilizing an aluminum cylinder head and cast iron cylinder block, paired with an 8-speed automatic transmission.
Was this review help?
11
5
Share
More Forum Discussions

What is the function of the vehicle KDSS?

The function of the vehicle KDSS system is to prevent further vehicle roll. Below are detailed explanations about the vehicle KDSS: Definition: The KDSS system is a front and rear stabilizer that uses bidirectional hydraulic pipelines and a cross-connected front and rear hydraulic cylinder system. When a regular vehicle experiences roll during driving, the KDSS system can effectively prevent the fluid circulation within the front and rear stabilizers. Notes: The vehicle KDSS system can adjust according to different road conditions. In off-road mode, since the stabilizer bar does not twist, the suspension travel is greater than that of a regular suspension, allowing the KDSS system to adjust based on varying road conditions.
18
5
Share

Can You Still Ride a Motorcycle with a Flat Tire?

No. The vacuum tires of a motorcycle cannot be used when completely flat. Continuing to ride will result in loss of stability, severe tire damage, and even more serious wheel rim deformation. Additional Information: If a nail is stuck in the tire, you can still ride at a slower speed for a short period as long as there is still air pressure in the tire. This is because when a nail punctures a vacuum tire, the internal pressure of the tire causes the airtight layer around the nail to be pressed against the puncture, creating a sealing effect under pressure that prevents or slows down air leakage. Therefore, if a vacuum tire is punctured by a nail, do not pull it out. Instead, ride slowly to a repair shop to have the tire fixed.
19
2
Share

What does car wifi hotspot mean?

In-vehicle Wi-Fi is a specialized internet access device designed for public transportation such as buses, coaches, private cars, and cruise ships. It enables Wi-Fi terminals to access the internet wirelessly for information, entertainment, or mobile office purposes. Additional information: Usage method: The usage of an in-vehicle Wi-Fi hotspot is the same as that of a regular Wi-Fi hotspot. As long as terminal devices such as personal computers and handheld devices (e.g., tablets, smartphones) support Wi-Fi functionality, users can open the wireless network connection, search for the corresponding in-vehicle Wi-Fi signal in the car, and then log in to connect to the Wi-Fi network to enjoy wireless internet access.
10
3
Share

What is the temp setting for cold air in a car?

In a car, a temp setting of 18°C produces cold air. Below is relevant information about car temp: Definition: Temp in a car refers to temperature, which can be adjusted via buttons. The temp button is generally located on the car's center console, and some models also have it at the rear air vents for independent control of rear air conditioning temperature. Adjustment method: There's a temperature adjustment knob on the car's dashboard with red and blue ends. Turning it fully to the red side produces hot air, while turning it fully to the blue side produces room-temperature air. To get cold air, you need to additionally press the compressor AC switch to activate the cooling system.
19
5
Share

How to Remove Whitening Caused by Waxing on Car Plastic Parts?

To remove whitening caused by waxing on car plastic parts, you can use toothpaste to wipe the surface. After cleaning, apply a bright white spray paint to restore the shine. The benefits of car waxing include: 1. Waterproofing: Car wax can reduce water droplet adhesion on the car's surface by 60% to 90%; 2. Heat resistance: It prevents incident light from penetrating the clear coat, which can cause the base paint to age and discolor, thereby extending the paint's lifespan; 3. Anti-static: Waxing creates a barrier between the air, dust, and the car's paint surface, preventing static electricity and significantly reducing dust adhesion; 4. UV protection; 5. Gloss enhancement; 6. Polishing: When there are shallow scratches on the paint surface, waxing with polishing can be used. If the scratches are not deep, polishing and waxing can be completed in one step.
1
5
Share

What are the reasons for insufficient power in motorcycles?

There are many reasons that can cause insufficient power in scooters. Apart from the inherently small engine displacement and limited power performance, the main reasons for insufficient power in scooters are as follows: Engine malfunction: Insufficient power leading to weak vehicle performance, inability to increase engine RPM. It is necessary to check the engine's operating condition, whether there is insufficient fuel intake, whether the air filter is clogged, whether the exhaust is obstructed, and whether the high-voltage electricity is normal. Component wear: The engine has RPM and strong power, but the vehicle's power performance is low. It is necessary to check whether the brake pads return to position normally, whether the components inside the transmission (box) are worn or aged, etc. A mechanic should be consulted to test drive and confirm the issue.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.