···
Log in / Register

What type of fire extinguisher is generally used in vehicles?

4 Answers
BlakelyAnn
08/29/25 5:21am
Vehicle fire extinguishers are generally dry powder fire extinguishers. The storage environment temperature for fire extinguishers should be within the range of -10 to 45 degrees Celsius, and the placement location should be kept dry and ventilated to prevent the fire extinguisher from getting damp and corroding. Fire extinguishers are categorized into: 1. Aerosol fire extinguishers; 2. Dry powder fire extinguishers; 3. Ultra-fine dry powder fire extinguishers; 4. Carbon dioxide fire extinguishers; 5. Water-based fire extinguishers. The method of using a fire extinguisher is: 1. Bring the fire extinguisher near the fire location and stand upwind of the fire; 2. Pull out the safety pin; 3. Hold the nozzle firmly with one hand; 4. Squeeze the handle tightly with the other hand; 5. Aim the nozzle at the base of the flames and sweep.
Was this review help?
8
4
Share
VonJonathan
09/11/25 3:05am
I recommend the ABC dry powder type for car fire extinguishers. After driving for so many years, it's essential to have one in the car because it can handle various fire situations—like oil fires caused by gasoline leaks or electrical fires from short circuits. When buying, choose a small bottle around one kilogram; it costs just a few dozen bucks online, but don’t cheap out on off-brand products, as they can expire easily and be unsafe. Install it in a corner of the trunk and secure it with a strap to prevent rolling around and causing accidents. I keep one in my own car and regularly check if the pressure gauge is in the green zone—just inspect it every six months. Remember, in case of an emergency, stop the car, open the door, and then use it—don’t panic and spray it everywhere. Developing this habit can prevent major issues; safety always comes first.
Was this review help?
18
2
Share
Expand All
DelAmy
10/25/25 3:56am
As a car enthusiast, an ABC dry powder fire extinguisher is a must-have in my vehicle. It's effective against Class A solid fires, Class B liquid fires, and Class C electrical fires, making it particularly suitable for automotive environments where risks like engine overheating or fuel tank leaks are most common. Avoid the carbon dioxide type as its effectiveness may become unstable in high-temperature car interiors. I prefer keeping a compact size in the storage compartment next to the driver's seat for quick access and peace of mind. Installation is simple - just secure it with Velcro, costing less than 100 yuan. For maintenance, check the pressure gauge needle position every three months, and replace the entire unit when nearing expiration - never compromise on this. In actual use, it's straightforward: aim at the base of the fire for instant extinguishing with pinpoint spraying.
Was this review help?
9
0
Share
Expand All
CarlosLee
12/08/25 4:18am
I always keep a small ABC dry powder fire extinguisher in my car. It's a common type for vehicles, capable of putting out gasoline fires and electrical circuit issues. Back in my novice days, an experienced driver suggested using this. It costs just tens of yuan online and can be placed in a corner of the trunk without any tools for installation—super convenient. Just make sure the pressure gauge stays in the green zone and don't let it expire. In case of an emergency, operate the nozzle quickly, accurately, and decisively. For safety's sake, check it before driving and make it a habit to minimize risks.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

Techniques for Three-Point Turn in Narrow Roads for Subject 2

Narrow road U-turn techniques mainly involve "three forward movements and two reverses". In fact, completing this series of actions is not particularly difficult. Below are the technique explanations: Steering wheel control: Push the front of the car as far as possible towards the innermost corner; Counter-steer, reverse, and try to keep the rear of the vehicle close to the "back wall"; Next step, counter-steer again to move the car forward, at this point only one more reversing action is needed to easily drive the car out of the "dead end". Below are the exam precautions: 1. Do not stall the engine; 2. The maneuver must be completed within "three forward movements and two reverses"; 3. Movements should not be sluggish; 4. Avoid touching the infrared monitoring lines.
1
2
Share

What's the Difference Between 4WD and 2WD When Buying a Car?

The differences between 2WD and 4WD: 1. Different driving methods: 2WD means only two wheels are driving wheels, connected to the vehicle's power system; 4WD refers to the vehicle maintaining four-wheel drive throughout the entire driving process. 2. Different fuel consumption: 2WD consumes less fuel; 4WD consumes more fuel. Below is information about part-time 4WD: 1. Introduction: Part-time 4WD is controlled by a computer chip to switch between 2WD and 4WD. On normal roads, the vehicle drives in two-wheel drive mode. When encountering off-road conditions or wheel slippage, the computer detects and automatically distributes power to the other two wheels. 2. Mode: For part-time 4WD mode, the quality of the control program affects the intelligence of the driving mode switching.
5
5
Share

What is the actual fuel consumption of the Geely Borui 1.8t?

The actual fuel consumption of the Geely Borui 1.8t model is around 10L. Here is some relevant information about the Geely Borui: 1. Exterior: The Geely Borui was designed by the internationally renowned automotive design master Peter Horbury and his international design team. The overall styling adopts a four-door fastback design, incorporating traditional Chinese cultural elements such as water ripple patterns, Chinese cloud motifs, and West Lake arch bridges. The Geely family-style water ripple front grille, sleek front end, wind tunnel lower grille, and wing-shaped rear end combine international design trends with Eastern aesthetic elements. 2. Interior: The Geely Borui features a "Starship Cockpit" design, with the interior largely wrapped in soft plastic molding materials. The center console is outlined with "V"-shaped lines, innovatively integrating the instrument panel, central control screen, and co-pilot console into one, presenting an IMAX-like visual effect.
17
4
Share

How to Properly Adjust a Car Seat?

The following are the correct methods for adjusting a car seat: 1. Press into the seat: First, press your body firmly into the seat to ensure that your hips and back are snug against the seat. 2. Seat height adjustment: Ensure that your horizontal eye level is slightly above the middle of the windshield. Make sure that when the sun visor is opened, your downward line of sight is not obstructed by the visor; ensure that when your head is raised normally, there is at least a two-finger distance between your head and the car roof. 3. Seat backrest adjustment: Primarily focus on comfort. The backrest angle should ideally be between 100-120 degrees, ensuring maximum contact area with your back. During long drives, occasionally changing the backrest angle can help alleviate lower back pressure. 4. Seat forward and backward adjustment: Adjust according to the position of the vehicle's pedals. When the pedals are fully depressed, the driver's knees should have a slight bend, ideally around 120 degrees.
3
0
Share

What Causes the Car to Not Accelerate When Pressing the Gas Pedal While the RPM Goes Up?

The issue where the car does not accelerate when pressing the gas pedal while the RPM goes up is due to a transmission malfunction. Below are the detailed reasons: 1. Gear Issue: The transmission is stuck in a low gear, and the high speed is achieved by the engine running at high RPM. This situation is typically only applicable when the vehicle is climbing a steep slope under heavy load, as it allows for greater torque to provide sufficient traction. 2. Clutch Slippage: Clutch slippage can also cause this type of problem. The clutch is installed between the engine flywheel and the transmission input shaft. When the clutch pedal is fully released, the engine's power is transmitted to the transmission nearly 100% through the clutch. If the clutch slips, it will result in slow acceleration when pressing the gas pedal. 3. Instrument Failure: If the engine tachometer shows an inaccurately high RPM or the speedometer displays a speed lower than the actual speed, it can also create a false impression.
4
4
Share

Is There a Risk to Life When Sleeping in a Car with the Heater On?

Sleeping in a car with the heater on can be life-threatening if the windows and doors are completely closed, as it may lead to carbon monoxide poisoning. Here are some related details: 1. Principle of the car heater: The heater relies on the heat dissipated by the engine. A fan in the engine compartment blows the heat collected by the cooling system into the car. If the heater is not turned on, this heat will be wasted by being expelled outside the car. 2. Using the heater does not increase fuel consumption: In winter, there is no need to save fuel by not using the heater. Due to the working principle of the heater, turning it on in winter does not increase fuel consumption. 3. There is no need to turn on the AC: The AC switch controls the car's air conditioning compressor system. Since using the heater only involves the internal heat circulation of the car, there is no need to activate the compressor. Therefore, there is no need to turn on the AC switch when using the heater.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.