···
Log in / Register

What type of engine oil should be used for the Roewe RX5?

3 Answers
ZoeRose
09/05/25 6:16am
The original engine oil brand for the Roewe RX5 is Castrol Edge. If you want to change the oil during later maintenance, you can choose brands such as Shell, Mobil, Castrol, or Total. The official manual for the Roewe RX5 recommends an engine oil model of 5W-30. Any oil model that meets these specifications can be used. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother for the car. The latter number represents the oil's kinematic viscosity at 100°C. The higher the number, the better it can maintain viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in the Roewe RX5 is as follows: Wait for the engine temperature to drop, and also allow the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain; Use a special wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new oil through the engine valve cover filler port. Generally, fill about three-quarters of a bottle; Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs; After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.
Was this review help?
13
3
Share
McEvelyn
09/17/25 6:38am
I've been driving the Roewe RX5 for over a year now. According to the manual's recommendation, the 1.5T engine is most suitable for 5W-30 or 0W-30 full synthetic oil. The car's included manual clearly states this, and I always follow this guideline when choosing oil. For daily city driving, it runs smoothly and fuel-efficiently, without any issues like excessive engine noise or vibration. I keep the oil change interval at around 7,500 kilometers. It's best to have it done at a professional shop, though you can also check the dipstick yourself to see if the oil is clean. Oil that's too thin or too thick might accelerate carbon buildup, affecting power response. Choosing the right oil type not only saves hassle but also extends engine life, avoiding unnecessary minor repairs. After all, car maintenance is a long-term commitment—don't try to save money by using random oil brands.
Was this review help?
16
2
Share
Expand All
StGrace
10/31/25 7:08am
As a car owner who values driving experience, I've specifically researched the engine oil options for the Roewe RX5. It primarily recommends 5W-30 full synthetic oil, but if you frequently drive on highways or mountain roads, I suggest trying 5W-40 synthetic oil. It can better handle the high-temperature load of turbocharged engines, reduce the risk of oil film rupture, and improve starting response and smoothness. The manual usually provides detailed guidance—don't overlook the API SN or SP grade requirements. Low-quality oil can easily lead to increased fuel consumption or even excessive emissions. I regularly check the oil condition; if it turns black or has sediment, it's a signal to change it. Good engine oil keeps the engine clean, so you don't have to worry about overheating even on long trips.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

Where is the best place to install a car phone mount?

The installation positions for car phone mounts are as follows: 1. Dashboard suction cup type: As the first generation of phone mounts, the disadvantage is that the suction cup is not firm, and the phone is prone to falling; the advantage is that the dashboard position is optional, allowing placement in the most comfortable position. 2. Windshield suction cup type: Installed on the windshield, the disadvantage is that it obstructs the view and is unsafe; the advantage is the snake rod structure, which allows for easy angle adjustment. 3. Air vent hanging type: Installed at the air vent position, the disadvantage is that due to different car models, the fixing structure and position are limited, making it unable to rotate or adjust angles; the advantage is that it is firmly fixed. 4. Magnetic 360-degree rotating phone mount: Can be installed on any flat surface convenient for the driver to operate, the disadvantage is that the magnetism may affect the phone's signal and magnetic field, and removing the adhesive may leave marks; the advantages are compact size, flexibility, unobstructed view, and the ability to pick up the phone with one hand to answer calls.
6
4
Share

Where to Buy Auto Parts from Scrapped Vehicles?

You can purchase satisfactory auto parts from scrapped vehicles at local used auto parts markets or auto parts markets. Larger cities typically have specialized auto parts markets, and some even have dedicated markets for scrapped vehicle parts. Buying from these places is the choice of most consumers. Every city has auto parts markets, but the availability of a large inventory of scrapped vehicle parts depends on the scale of the auto parts market in that city. Below are the specific regulations for vehicle scrapping: 1. Failing the annual inspection for three consecutive cycles: According to the 'Compulsory Scrapping Standards for Motor Vehicles,' any vehicle that fails to obtain a valid inspection mark for three consecutive inspection cycles after the expiration of its inspection period shall be compulsorily scrapped. Driving a forcibly scrapped vehicle on the road will result in severe penalties for the driver, including fines and revocation of the driving license. 2. Mandatory implementation of the National IV emission standard: All National II and National III models that fail to meet the emission standards will not be allowed to register. Vehicles already registered that do not meet the standards will be guided to scrap or forcibly scrapped.
11
1
Share

What specific faults does a vehicle starting system malfunction refer to?

Battery power supply system faults such as insufficient battery charge, failure of the main car power fuse, loose or oxidized battery terminals can easily lead to issues like the horn not sounding, dim instrument lights, slow window operation, dim car headlights, and flashing anti-theft indicator lights. Starter relay faults such as short circuits in the starter relay inductor coil, burnt or eroded moving or stationary contacts of the starter relay, excessive gap between the starter relay core and contact arm, etc. Starter motor faults such as issues with the starter DC motor, transmission mechanism faults, control device failures, starter switch faults, and failure of the car's start gear, etc.
3
2
Share

What Causes Frequent Low Coolant Levels in a Car Radiator?

Frequent low coolant levels indicate a leak in the cooling system or a minor head gasket breach. Possible causes include excessively high coolant temperatures leading to system depletion. Coolant leaks may be visible at the front of the engine. Below are relevant explanations: 1. Car Radiator: Also known as a heat exchanger, it's a crucial component of the automotive engine and the primary device in the cooling system. Its function is to dissipate heat - coolant absorbs heat in the water jacket, releases it when flowing through the radiator, then returns to the water jacket, creating continuous circulation for temperature regulation. 2. Causes of Depletion: Possible reasons include coolant being forced out of the reservoir by steam pressure when water temperature rises, or malfunctioning water pump/thermostat causing high circulation system temperatures. This creates excessive pressure in the radiator and cooling system, forcing coolant out of the reservoir. Another potential cause could be compromised cylinder head gasket sealing.
16
2
Share

What types of vehicles are generally used for wedding photography cars?

Wedding photography cars generally use the following types of vehicles: 1. Convertibles: If the couple's financial condition is good, they can rent a convertible as a wedding photography car. Because convertibles generally have better performance, and the roof can be opened directly, making it convenient for photographers to record videos of the wedding car fleet. 2. Vans: If the couple's wedding car budget is not very sufficient, then choosing a practical van as a photography car is also a good option. Because vans have a larger interior space and are also very high, making it convenient for photographers to capture the entire fleet. 3. SUVs: SUVs are generally taller and more stable when driving, making them very suitable as wedding photography cars. During the drive, some bumps are inevitable. Choosing an SUV can help record the wedding video more smoothly.
3
5
Share

What Causes the Manual Transmission Car Key to Get Stuck?

Manual transmission car key stuck: Generally, there are three main reasons why a car key cannot be pulled out: The first is that the key cannot be turned after insertion; the second is that the key gets stuck due to ignition failure; and the last is that the key cannot be pulled out after the engine is turned off. The details are as follows: 1. The key cannot be turned after insertion: This is usually caused by accidentally turning the steering wheel left or right after parking and turning off the engine, or if the wheels are not aligned properly when parked. The force applied can cause the steering wheel to turn, triggering the steering wheel lock mechanism. The steering lock pin engages with the steering column, making the steering wheel immobile, and even if the key is inserted, it cannot be turned no matter how hard you try. 2. Ignition switch failure: This can cause the car key to get stuck, and the ignition switch needs to be replaced. 3. The key cannot be pulled out after turning off the engine: This happens when the gear is not fully engaged in the P (Park) position. Sometimes it may appear to be in place, but it hasn’t actually triggered the electronic sensor, or there might be obstacles like coins in the gear slot preventing it from returning to the correct position.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.