What type of engine oil should be used for the Mistra?

How to Check Car Battery Voltage?

Methods to check car battery voltage: Use a multimeter to measure the voltage between the positive and negative terminals of the battery. A normal reading should be around 12.6V; if it's below 11.8V, it indicates a discharged battery. When the engine is running, the voltage should be around 14V, which means the alternator is charging properly. Precautions for using the battery: 1. Avoid using electronic devices in the car for extended periods without starting the engine, as this will shorten the battery's lifespan. 2. Disconnect the negative terminal of the battery if the car will not be used for a long time to prevent battery discharge. Methods to determine if the car battery is fully charged: 1. If the electrolyte is boiling and bubbles appear, it indicates the battery is fully charged. 2. Measure the voltage of individual battery cells. If the voltage remains stable for 3 seconds and reaches 2.7V, it means the battery is fully charged. 3. Measure the relative density of the electrolyte. If the density remains stable for 3 hours and reaches its maximum value, it indicates the battery is fully charged.

3

2

Share

How to remove the front bumper of a Polo?

The method for removing the front bumper of a Polo: 1. Use a T25 Torx key to remove the two screws securing the front grille; 2. Use a flathead screwdriver to pry open the four clips of the front grille one by one; 3. After the clips are pried open, hold the left and right sides of the front grille with your hands and gently pull outward to separate the front grille from the front bumper; 4. Turn the wheels fully to the left, then use a T25 Torx key to remove all the screws securing the front bumper of the Polo GTI; 5. Hold the corners of the front bumper with your hands and gently pull outward to complete the removal. The Polo's dimensions are 4053 mm in length, 1740 mm in width, and 1449 mm in height, with a wheelbase of 2564 mm. The front suspension type is MacPherson strut independent suspension, and the rear suspension type is torsion beam non-independent suspension.

10

4

Share

Which Car Insurances Should You Purchase?

Car insurances that should be purchased include compulsory traffic accident liability insurance, commercial third-party liability insurance, vehicle damage insurance, passenger liability insurance, and deductible waiver insurance. Compulsory traffic accident liability insurance is a mandatory insurance where the insurance company compensates for personal injuries, deaths, or property losses of victims caused by the insured motor vehicle in road traffic accidents within the liability limits. Commercial third-party liability insurance refers to the insurance that covers the financial liability the insured must bear by law for accidental incidents caused by the insured or their permitted legal drivers using the insured vehicle, resulting in bodily injuries, deaths, or direct property damage to a third party. Vehicle damage insurance is a type of commercial auto insurance where the insurance company compensates within reasonable limits for damages to the insured vehicle caused by accidents while the insured or their permitted driver is operating it. Passenger liability insurance primarily functions to compensate for injuries or deaths of passengers inside the vehicle caused by traffic accidents. Deductible waiver insurance refers to the deductible waiver clause in auto insurance, which is a type of commercial additional insurance.

13

4

Share

What does the innermost lane mean?

The innermost lane actually refers to the leftmost lane of a multi-lane carriageway, which is adjacent to the road centerline, while the rightmost lane is called the outermost lane. Generally, when driving on highways, the innermost lane is commonly known as the overtaking lane. Here are some relevant details: 1. On multi-lane roads, the right side in the direction of vehicle travel is considered the outer side, while the left side is the inner side. For highways, the innermost lane is the so-called overtaking lane, which is adjacent to the road centerline or median barrier. The typical speed limit for this lane is 100 km/h to 120 km/h. 2. The inner lane refers to the lane closest to the road centerline on a multi-lane carriageway. According to Article 44 of the "Regulations for the Implementation of the Road Traffic Safety Law", when there are two or more motor vehicle lanes in the same direction, the left lane is designated as the fast lane, and the right lane is the slow lane. Vehicles traveling in the fast lane should maintain the speed specified for that lane. If a vehicle cannot reach the specified speed of the fast lane, it should move to the slow lane.

15

1

Share

Can the battery be charged immediately after adding water?

The battery should not be charged immediately after adding water (distilled or purified water). It needs to sit for 1-2 hours before charging. This is because the newly added water needs to fully mix with the original battery fluid (dilute sulfuric acid) to ensure the quality of the charging process. Below are the precautions for charging the battery after adding water: 1. When removing the positive and negative terminals, always follow the "negative first, then positive" sequence (the reverse of the installation order). This is because after connecting the negative terminal, it essentially completes the circuit for the car. If the positive terminal is connected last, there is a risk that the wrench (which is conductive) might accidentally touch the car's metal parts while tightening the screws, effectively connecting the battery's positive and negative terminals. This can not only cause a short circuit in the car battery but may also lead to sparking in severe cases. 2. It is best to avoid overcharging the battery. Although the current generated during charging is not very high, prolonged boiling of the electrolyte can cause fine particles on the surface of the active material to detach and, in severe cases, lead to oxidation of the grid, resulting in loose separation between the active material and the grid.

17

2

Share

Is There a Time Limit for the First Car Maintenance?

The first car maintenance has certain standards in terms of time or mileage, whichever comes first. If you drive less frequently and the time limit is reached first, then the time limit must be adhered to. Exceeding the time limit may result in the dealership considering the warranty void, and you won't be able to enjoy the car's warranty. Generally, the first maintenance mileage ranges from 2,500 to 7,500 kilometers, and the time limit is six months, whichever comes first. First Maintenance Tips: 1. Know Your Car: Before the first maintenance, fully understand if your car has any other issues or concerns and note them down. During the maintenance registration, inform the dealership about these items that need to be checked. 2. Understand the Maintenance Content: Before the maintenance, review the user manual to get an idea of the general content of this maintenance and any items that may require additional payment. 3. Schedule an Appointment: A few days before the maintenance, call the dealership to schedule a maintenance time. 4. Prepare Materials: For the maintenance, prepare the user manual (must bring), driver's license, digital camera, or a phone with a camera (preferably bring these, as they may be useful). 5. Bring a Friend: It's best to bring an experienced driver or at least a relative or friend during the first maintenance for assistance. 6. Organize Valuables in the Car: Before the maintenance, organize the items in your car. It's best to keep small valuables at home or carry them with you, such as mobile phones, laptops, Bluetooth headphones, etc., to prevent loss. 7. Avoid Being Misled: During the maintenance registration, don't be misled by the dealership's receptionist; stick to the free items only. 8. Follow the Process: After entering the maintenance workshop, it's best to follow the process personally. This way, you can observe the entire maintenance process, especially to monitor the materials used and the workers' attitude. Following the process also allows you to learn some simple repair techniques and understand your car's basic structure, which is very practical for handling emergencies on the road in the future. 9. Address Other Issues: After the regular maintenance is completed, urge the maintenance technician to address any other issues you've noticed beforehand. Ensure that any necessary parts are replaced and not just temporarily fixed, as this is within the free warranty period. After the warranty period, you'll have to pay for these yourself.

5

1

Share

What type of engine oil should be used for the Mistra?

How to Check Car Battery Voltage?

How to remove the front bumper of a Polo?

Which Car Insurances Should You Purchase?

What does the innermost lane mean?

Can the battery be charged immediately after adding water?

Is There a Time Limit for the First Car Maintenance?

Can a Vehicle Charge While Idling?

Where is the sensor for the Magotan's trunk located?

Why does the Tiguan's door light stay on?

What are the symptoms of a faulty clutch sensor?