What type of engine oil should be used for the Malibu XL?

1 Answers
McFelicity
07/29/25 8:18pm
The Malibu XL is recommended to use fully synthetic engine oil. Fully synthetic oil offers significantly better stability and heat resistance compared to mineral oil, meaning it retains more of its lubricating properties and fluidity under high temperatures. Additionally, synthetic oil has superior cleaning properties compared to conventional mineral oil, resulting in cleaner and more wear-resistant lubrication points. Extended benefits of fully synthetic oil include: 1. Oil change intervals: Synthetic oil allows for longer intervals between changes, with a minimum standard of 10,000 kilometers for fully synthetic oil. Higher-performance fully synthetic oils, especially those imported, can last between 15,000 to 30,000 kilometers per change. 2. Performance: Turbocharged engines and direct-injection engines require fully synthetic oil to perform optimally. Turbocharged engines, in particular, demand higher oil specifications and better resistance to high temperatures, which only fully synthetic oil can provide. 3. Maintenance costs: Fully synthetic oil is more cost-effective in the long run. When considering the extended oil change intervals, mineral oil does not offer a better price-performance ratio. Fully synthetic oil provides better value, making it a more economical choice.
Was this review help?
5
0
Share
More Forum Discussions

Why was the GLK260 discontinued?

Mercedes-Benz discontinued the GLK model because it was replaced by the GLC, which is positioned in the same midsize SUV segment. Here are the relevant details: 1. The GLK enjoyed strong sales due to its brand appeal and fashionable design that catered to female consumers. However, as the GLK had been on the market for a long time, it underwent a model refresh, with the all-new GLC taking its place. 2. The GLK's exterior design was highly successful, and its performance was equally impressive, making it a classic model. Its angular and rugged body exuded a bold and wild appearance, combining the brand's influence with clean yet strong lines, achieving a perfect balance of toughness and elegance.
12
0
Share

How to use the cruise control on Changan CS35?

The method to use the cruise control on Changan CS35 is: 1. Press the control switch to activate the cruise control standby mode, accelerate to the desired speed, and then push the control lever downward to set the cruising speed; 2. To accelerate, push the control lever upward or press the accelerator pedal; 3. To cancel the cruise control, pull the control lever upward, turn off the main cruise control switch, press the accelerator pedal, or lightly tap the brake. The Changan CS35 is a compact 5-door, 5-seat SUV with body dimensions of: length 4170mm, width 1810mm, height 1670mm, and a wheelbase of 2560mm. The Changan CS35 is equipped with a 1.6L engine, delivering a maximum power of 92kW and a maximum torque of 160Nm, paired with a 4-speed automatic transmission.
5
2
Share

What is the engine displacement of the Elysion?

The Elysion is equipped with two engines, a 2.0L and a 2.4L, with actual displacements of 1993ml and 2356ml respectively. The engine models are LFB12 and K24V6. Below is an introduction to these two engines of the Honda Elysion: LFB12 Engine Specifications: The LFB12 engine has 4 cylinders arranged in an L formation, with natural aspiration intake, a compression ratio of 13.5, and a DOHC valve train. The LFB12 engine reaches its maximum power at 6200 rpm and its maximum torque at 3500 rpm, utilizing multi-point fuel injection. K24V6 Engine Specifications: The K24V6 engine has 4 cylinders arranged in an L formation, with natural aspiration intake, a compression ratio of 11.1, and a DOHC valve train. The K24V6 engine reaches its maximum power at 6400 rpm and its maximum torque at 3900 rpm, utilizing direct fuel injection.
16
5
Share

How to Use Lights on the Highway?

Highway light usage methods are: 1. During normal high-speed driving, turn on the night lights and width indicator lights; 2. When there are no vehicles ahead, you may appropriately use high beams to briefly observe the road surface and surrounding conditions at a greater distance ahead, then quickly switch to low beams; 3. When overtaking, change from high beams to low beams in advance and activate the turn signal. Highway safe driving methods include: 1. Before driving, check fuel level, tire pressure and wear, braking effectiveness, engine oil level, lights, etc.; 2. When entering the highway from the ramp entrance, turn on the left turn signal and increase speed; 3. Maintain sufficient safe distance from the vehicle ahead; 4. Activate the left turn signal before overtaking and avoid sudden steering during the overtaking process; 5. Avoid making phone calls, playing around, leaning out of the window, or throwing objects while driving.
13
2
Share

How Far Can a Car Key Remote Control Reach?

The remote control range of a car key is typically between 30 to 50 meters. The functions of a car key remote include: 1. Remotely locking and unlocking the car doors; 2. Pressing the red horn-shaped button on the car key to locate the vehicle or send a distress signal; 3. Holding down the lock button on the remote key after turning off the engine to close the windows; 4. Holding down the trunk unlock button to automatically open the trunk. The steps to replace the battery in a car key remote are: 1. Identify the battery model used in the car key; 2. Press the key symbol button on the side of the car key; 3. Remove the mechanical key from the car key, insert a flat-head screwdriver into the 'open' position, and pry open the car key; 4. Open the car key to locate the battery compartment; 5. Replace the battery; 6. Reassemble the car key; 7. Insert the mechanical key back into the car key.
17
2
Share

What is the fuel consumption of the Ford F650?

Fuel consumption is 30 to 50L/100KM. There are three methods to reduce vehicle fuel consumption: 1. Control driving speed: The economic speed is the speed at which the vehicle consumes the least fuel when driving in direct gear or overdrive. On the same road, different speeds result in different fuel consumption. Therefore, driving at a specific speed minimizes fuel consumption. Thus, driving at medium speed in direct gear or high gear can save fuel. 2. Gear selection: Gear selection and shifting actions significantly impact fuel consumption. When starting, choose the appropriate gear based on load and road conditions. While driving, downshift promptly when feeling a lack of power instead of solely pressing the accelerator, as excessive throttle use increases fuel consumption. 3. Vehicle temperature: Engine temperature directly affects fuel efficiency. Both excessively high and low temperatures lead to increased fuel consumption. The engine's working water temperature should be maintained between 80°C and 90°C. Preheating the engine before starting in cold conditions helps warm it up and significantly saves fuel.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.