···
Log in / Register

What type of engine oil should be used for a Langdong oil change?

4 Answers
Phyllis
09/06/25 3:21am

For a Langdong oil change, engine oil with a viscosity of 20 or 30 should be used. When the engine is operating normally, the oil forms a thin film on the surfaces of various components inside the engine, which helps reduce wear on these parts and also decreases the engine's running resistance. When changing the oil, it is recommended that car owners use a lift to raise the vehicle, then loosen the oil pan drain plug to drain the old oil. It is essential to replace the oil filter every time the oil is changed. The Langdong is a compact sedan with body dimensions of 4570mm in length, 1775mm in width, and 1445mm in height, with a wheelbase of 2700mm. It features a typical family-oriented front design, with lines that are less sharp but more rounded, giving it a harmonious appearance. The grille is fully chrome-plated, adding a more upscale look.

Was this review help?
6
3
Share
SawyerMarie
09/18/25 3:21am

My Elantra has been running for three years, and I always use 5W-20 for oil changes as recommended in the manual. Its low viscosity ensures quick starts in winter while still protecting the engine in summer. The replacement interval typically ranges between 5,000 to 8,000 kilometers, depending on driving habits. If you do more highway driving, you can stretch it longer; for frequent short city trips, shorten the interval. Checking the dipstick is easy—just pull it out, wipe it clean, reinsert it, and ensure the oil level stays between Min and Max. Don't cheap out on low-quality oil—synthetic oil, though pricier, lasts longer and extends engine life. Regular changes also prevent carbon buildup, saving money and hassle.

Was this review help?
16
4
Share
Expand All
ORichard
11/01/25 3:48am

As an experienced mechanic who frequently helps others with car repairs, I highly recommend using 5W-20 or 5W-30 oil for the Hyundai Elantra. The manual usually specifies these two grades, which are suitable for most climates in China. If the ambient temperature is high, 5W-30 offers better protection; in colder regions, 5W-20 ensures smoother operation. Don't forget to replace the oil filter during the oil change, as low-quality filters can clog the oil passages. It's advisable to check the oil level every 5,000 kilometers to avoid underfilling or overfilling. Synthetic oils like Mobil or Great Wall brands perform exceptionally well, enhancing lubrication efficiency and reducing noise. Remember to change the oil promptly to prevent engine wear, ensuring hassle-free daily maintenance.

Was this review help?
19
0
Share
Expand All
DiIvan
12/15/25 3:57am

I pay attention to environmental protection, and using 5W-20 oil is ideal for the Langdong. Low-viscosity oil reduces friction, saving about 15% on fuel, indirectly lowering carbon emissions. Don't arbitrarily change the model recommended in the manual, and ensure used oil is recycled—improper disposal can pollute the soil. With good maintenance, the engine responds more smoothly. Follow the manufacturer's recommended oil change frequency for both environmental and practical benefits.

Was this review help?
13
3
Share
Expand All
More Forum Discussions

How often should the coolant be replaced in a Nissan Tiida?

Nissan Tiida's official guidelines recommend replacing the coolant every 32,500 kilometers or every 39 months. The coolant replacement procedure is as follows: Before performing a complete coolant replacement, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with particular attention to the five-way water pipe. Coolant flows through this pipe before being distributed to various parts of the vehicle to perform its function. If there are signs of coolant leakage in this area, replace the water pipe or resecure the connection as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue filling until water flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir will have a faint pink tint. Continue adding clean water until the outflowing water runs clear. Note: Remember to disconnect the heater hose to drain all water from the heater core. Approximately one hour after draining, add new coolant through the radiator hose. Then, pour another container of coolant into the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop as air is purged from the system. Top up the coolant to the "MAXT" mark on the reservoir.
1
0
Share

Is it necessary to replace both car tires at the same time?

It is recommended to replace both car tires at the same time. Below are the reasons and benefits for recommending replacing both car tires together: Reasons for recommending replacing both car tires together: Replacing both tires on either side ensures the same tread pattern. When mechanics replace both tires, they also perform dynamic balancing correction, which ensures even force distribution among all four tires. Benefits of recommending replacing both car tires together: It helps maintain equal weight distribution on the vehicle body, improving smoothness during braking and turning. Having the same tread pattern on both sides enhances driving safety and also contributes to better fuel efficiency.
4
5
Share

Does a three-year-old new car require an annual inspection?

Whether a three-year-old new car requires an annual inspection depends on the specific situation: if it is a small or mini non-operational passenger vehicle, a three-year-old new car does not require an annual inspection. For other vehicle types, a three-year-old new car does require an annual inspection. Annual inspection time requirements: Small and mini non-operational passenger vehicles are exempt from inspection for the first 6 years, after which they must be inspected every two years if they are between 6 and 10 years old; if they are between 10 and 15 years old, they must be inspected annually; if they are over 15 years old, they must be inspected every 6 months. Operational passenger vehicles must be inspected annually for the first 5 years; after 5 years, they must be inspected every 6 months. Trucks and large or medium non-operational passenger vehicles must be inspected annually for the first 10 years; after 10 years, they must be inspected every 6 months. Imported vehicles are the same as other vehicle types and can undergo regular inspections at any testing facility. Conditions for 6-year inspection exemption: The vehicle must be non-operational; the approved passenger capacity must be 9 or fewer. Starting from November 20, 2020, non-operational mini and small buses with 7-9 seats (excluding vans) are included in the exemption scope; the vehicle type specified on the driving license must be: car (mini, small, medium, large), mini ordinary passenger vehicle, mini off-road passenger vehicle, small ordinary passenger vehicle, small off-road passenger vehicle, small special-purpose passenger vehicle; vehicles that have not been registered for more than 4 years since their production date are excluded; the vehicle must meet the above conditions and must not have been involved in any fatal traffic accidents during the exemption period.
10
5
Share

What Causes Rapid Blinking of Car Turn Signals?

Rapid blinking of car turn signals is caused by a faulty flasher relay or poor bulb contact. Below are the specific reasons for rapid blinking of car turn signals: Faulty Flasher Relay: Check whether the flasher relay is functioning properly. Use a multimeter to measure the output line of the flasher relay to see if there is a 12V output. If there is intermittent output variation, it indicates normal operation. However, if there is no output or a constant 12V output, it means the flasher relay is damaged and needs to be replaced with a new one. Poor Bulb Contact: If you have some DIY skills, you can inspect the bulb and its socket for poor contact. Poor contact will naturally cause rapid blinking, so you need to reinstall the bulb securely.
11
3
Share

How to Remove the Maintenance Reminder on a Car?

Different car brands have different methods to cancel the maintenance reminder, but most of them can be canceled by long-pressing the reset button on the car. Below are the specific steps to cancel the maintenance reminder for Toyota and Honda, which are the most commonly seen brands on the road: 1. Turn off the car completely. 2. Press and hold the reset button next to the odometer. 3. Turn the car key to the ignition position and rotate it clockwise. 4. Press the MODE button and turn off the car's ignition switch. 5. The car maintenance reminder has been successfully canceled.
13
1
Share

What is the normal cylinder pressure value?

The normal cylinder pressure value should not be lower than 700KPa. The following are the inspection and effects of normal cylinder pressure: Inspection of normal cylinder pressure: The simplest way to check cylinder pressure is to verify whether the four cylinders have the same pressure. If one cylinder's pressure differs from the others, it indicates that this cylinder is not functioning properly. Effects of normal cylinder pressure: Cylinder pressure refers to the compression pressure size when the piston reaches the top dead center at the end of compression. Insufficient cylinder pressure will lead to decreased combustion efficiency, insufficient power, increased fuel consumption, and excessive engine temperature; increased carbon deposits, severe engine shaking; lubricating oil entering the cylinder, causing oil burning; black smoke from the exhaust pipe, reduced engine lifespan, and premature vehicle scrapping.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.