···
Log in / Register

What type of engine oil should be used for a Land Rover Evoque?

3 Answers
LaEva
09/07/25 7:18am
Land Rover Evoque uses 5W30 fully synthetic engine oil, which is suitable for its turbocharged engine. It is best to use oil that meets the European oil certification standard A5B5. Engine oil models are divided into summer, winter, and all-season oils. Winter oil grades are: 0W, 5W, 10W, 15W, 20W, 25W. The symbol W stands for Winter, and the smaller the number before W, the lower the low-temperature viscosity and the better the low-temperature fluidity, making it suitable for lower minimum temperatures. Summer oil grades are: 20, 30, 40, 50. The larger the number, the higher the viscosity, making it suitable for higher maximum temperatures. All-season oil grades are: 5W/20, 5W/30, 5W/40, 5W/50, 10W/20, 10W/30, 10W/40, 10W/50, 15W/20, 15W/30, 15W/40, 15W/50, 20W/20, 20W/30, 20W/40, 20W/50. The smaller the number representing the winter part, and the larger the number representing the summer part, the higher the viscosity and the wider the applicable temperature range. Methods for selecting engine oil models: Temperature and operating conditions are two important criteria for choosing engine oil. In regions with low winter temperatures, try to choose a model with a smaller number before W. For those who enjoy driving fast or have older cars, choose a model with a higher viscosity coefficient after W. It is recommended to choose from high-end brands whenever possible.
Was this review help?
3
1
Share
PiperRose
09/19/25 6:25am
After running my repair shop for so many years, the Range Rover Evoque is a pretty common sight, and choosing the right engine oil is crucial. Generally, I recommend 0W-20 full synthetic oil, especially for recent models, because its low viscosity ensures better flow during cold starts, reducing engine wear. Why synthetic oil? Conventional mineral oils don’t provide enough protection under extreme temperatures and can lead to carbon buildup. Always check the owner’s manual—there might be slight variations for different model years, like older versions recommending 5W-30. The oil change interval is typically between 7,500 to 10,000 miles, but if you often drive in dusty conditions, it’s better to change it earlier. Opt for branded oils like Castrol or Shell, specifically formulated for Land Rovers, to ensure compatibility. The key point is not to use the wrong oil grade, as it could reduce fuel efficiency or accelerate engine aging, which would be counterproductive in the long run.
Was this review help?
16
2
Share
Expand All
StJesse
11/02/25 6:48am
I've been driving a Range Rover Evoque for five years, and my maintenance experience tells me that using 5W-30 full synthetic engine oil is the most reliable choice. This viscosity works perfectly for older engines, providing quick starts in winter and stable lubrication under high summer temperatures. I've used Mobil 1 brand oil, and after each oil change, I noticed the engine runs much quieter with no strange noises during acceleration. Never skimp on quality by buying low-grade oil—poor-quality lubricants can accelerate engine component wear, leading to costly repairs. I change the oil every 8,000 kilometers, even though the manual suggests 10,000 kilometers, as being conservative helps extend engine life. Before each oil refill, I check the dipstick to ensure proper oil level, as both overfilling and underfilling can affect performance. With this long-term maintenance routine, my car still runs like new even after 100,000 kilometers.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

How to Read the Date on Car Window Glass?

How to Read the Date on Car Window Glass: There is a code in the lower left or lower right corner of the car window glass. The last or second-to-last row contains a number and several small black dots, which indicate the production date of the glass. For new cars, the glass is usually new, but when buying a used car, many people may not easily notice if the glass has been replaced. In addition to checking the production date, you can also look at the brand label. After replacement, the label on the new glass will differ significantly from the original factory glass. Typically, the original factory glass label includes not only the car brand logo but also the glass brand logo. Due to certain policies of car manufacturers, retail suppliers are prohibited from using the car brand trademark on the market. As a result, most replacement glasses only have the glass brand label without the car brand label.
2
3
Share

Why is the price of second-hand Jeep Cherokees so low?

The main reason is the numerous quality issues with the Cherokee, leading to a poor reputation. Below is a relevant introduction to the Cherokee: 1. Exterior: The design style of the Cherokee is quite different from before. Although it still features a 7-slat grille, the grille design is not the traditional vertical style. Additionally, the slim headlights make this model distinctly different from previous Jeep-style products. 2. Configuration: The vehicle is equipped with a 2.4L Tigershark four-cylinder engine, with a maximum output power of up to 128.5kW and a peak torque of 227.5N·m, along with the latest generation engine automatic start-stop system. The imported high-end model is equipped with a 3.2L Pentastar engine, with a maximum power output of 271 horsepower and a peak torque of 324N·m.
6
5
Share

How to Repair Dents on a Car?

The methods to repair dents on a car are: 1. Pull-out method: Insert the hot melt glue stick from the back of the glue gun, plug the glue gun into a power socket, set the glue gun to a higher temperature, preheat for 3 to 5 minutes to allow the hot melt glue to completely melt, pull the trigger of the glue gun, apply the melted glue to the traction pad, and pull it outward; 2. Pry-up method: Remove the interior panel of the door, unfasten the door panel fixing clips, disconnect the wiring harness on the door panel, and insert a tool into the door to pry it. The methods to maintain a car are: 1. Do not wash the car under direct sunlight to prevent the paint from cracking due to sudden temperature changes; 2. Regularly inspect the car's paint surface and promptly address any cracks or dents.
13
5
Share

Can Lexus maintenance be done at any 4S store?

Of course you can. With nationwide warranty, you can take your maintenance manual to any Lexus 4S store across the country to enjoy free maintenance as well as future maintenance and repairs. This is what we call nationwide warranty, which has nothing to do with where you bought the car. The free maintenance is subsidized by the manufacturer to the 4S stores - they get paid for it. Did you think they'd work for free? Rest assured, there's no problem. Maintenance basics: 1. Generally speaking, new cars come with a warranty-free period (currently mainly 2 years/60,000 km - 3 years/100,000 km). During this period, the 4S store is responsible for vehicle quality issues; after this period, the owner becomes responsible. 2. The maintenance quality at 4S stores is guaranteed and comprehensive, though the prices are slightly higher.
1
4
Share

What is an ETCa Card?

ETCa card is a high-speed ETC postpaid A card, similar to a credit card. Specifically, the ETCa card refers to a product that allows highway passage first with payment later. When traveling, you don't need to worry about the balance in your ETC card. After passing through the highway, the system will automatically deduct the fee from the linked Alipay account or credit card account. ETC Card Binding: There are two types of ETC card binding: one is binding to a credit card, and the other is binding to a debit card. How ETC Works: Through the on-board electronic tag installed on the vehicle's windshield, specialized short-range communication is established with the microwave antenna in the ETC lane at the toll station. This utilizes computer networking technology to perform backend settlement processing with the bank, thereby achieving the purpose of vehicles passing through highway or bridge toll stations without stopping while still paying the highway or bridge tolls.
4
4
Share

How to Adjust Belt Misalignment?

If the car's belt is misaligned, adjustments should be made from the head of the machine when the vehicle is running unloaded. First, adjust the empty section, then adjust the loaded section. Belt misalignment should also be adjusted based on the position of the misalignment. If the belt is misaligned in the middle of the conveyor, observe which direction the belt is running, and the idler should be moved forward in the direction of the belt's movement, adjusting according to the belt's operation. If the belt is misaligned on each roller, observe the direction of the belt's misalignment and use the adjustment bolts on the roller shaft seat to adjust the direction of the belt's misalignment. The car's drive roller, nose roller, and tail roller have already been adjusted when the car left the factory, and they are not easily readjusted under normal circumstances.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.