What type of engine oil is used in the Volkswagen Sagitar?

2 Answers
LillianaLynn
08/29/25 2:37am
Volkswagen Sagitar 1.6L 77kW SRE gasoline engine, 1.4L 96kW TSI gasoline engine, and 1.8L 118kW TSI gasoline engine use engine oil that meets the VW50200 specification. Alternatively, 5W30 or 5W40 grade oils can also be used. Depending on the vehicle's operating conditions, the oil consumption rate may vary for each engine, and it may change over the engine's service life. Relevant information about engine oil is as follows: 1. Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves multiple functions such as lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. It is often referred to as the "blood" of a car. 2. Composition: Engine oil consists of two main components: base oil and additives. Base oil is the primary component of lubricating oil, determining its fundamental properties. Additives are used to compensate for and improve any deficiencies in the base oil's performance, as well as to provide additional beneficial properties, making them an essential part of lubricating oil.
Was this review help?
17
4
Share
MacStephen
09/10/25 7:21am
I've been driving a Volkswagen Sagitar for almost three years. The manual recommends using fully synthetic oil that meets Volkswagen specifications, such as 5W-30 viscosity, which works well for me—the engine runs smoothly with minimal noise. Remember to choose based on the model year; older models might suit 5W-40, while newer turbocharged versions can use 0W-20 for better fuel efficiency. I change the oil every 8,000 kilometers to prevent carbon buildup and always go to authorized service centers to avoid counterfeit products. Cold starts are easier, and throttle response is quicker while driving—these details truly impact the experience. Don’t forget to check your owner’s manual for your engine’s specific requirements. If you frequently drive on highways, opt for slightly higher viscosity oil for added protection.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

Is there a convertible version of the Audi A3?

Audi A3 does have a convertible version. Here are some parameters and configurations of the Audi A3 convertible: 1. In terms of body dimensions: The length, width, and height of the Audi A3 convertible are 4436*1793*1386mm. 2. In terms of power: The Audi A3 convertible is equipped with a 2.0-liter turbocharged engine, with a maximum horsepower of 190 hp, a maximum power of 140 kW, and a maximum torque of 320 N·m. 3. In terms of transmission: The Audi A3 convertible uses a 7-speed dual-clutch transmission. 4. In terms of emission standards: The Audi A3 convertible complies with the China V vehicle emission standard. 5. In terms of suspension: The front suspension of the Audi A3 convertible is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. 6. In terms of configurations: The Audi A3 convertible comes standard with features such as front and side airbags, a tire pressure monitoring system, parking sensors, engine start-stop technology, a multifunction steering wheel, GPS navigation system, smartphone integration/mapping system, car networking, and LED lighting.
5
2
Share

Will the Geely Xingrui's panoramic sunroof cause sun exposure?

Geely Xingrui's panoramic sunroof will cause sun exposure. Below are the specific details about the Xingrui: 1. Exterior: The Sky Gray exterior paint enhances its premium feel and gives it a distinctive character. The blackened vertical waterfall-style front grille with a pulse magnetic field design adds a sporty effect. 2. Powertrain: It continues with the 2.0T standard power version engine, delivering 190 horsepower and a peak torque of 300 N·m, paired with a 7-speed wet dual-clutch transmission. It performs well in terms of power response, smooth output, and fuel efficiency. The front MacPherson + rear multi-link independent suspension offers excellent craftsmanship, good flatness in design, and a balance of handling and comfort, making it a top-tier performer in its price range. The 18-inch wheels with red brake calipers further enhance its sporty appeal.
8
5
Share

What brand is the Spirior?

Spirior is a model under Dongfeng Honda. Here are the specific details about the Spirior: 1. The Spirior has been discontinued and is no longer available for sale. 2. The last model of the Spirior was the 2017 version, which included 6 variants, two of which were hybrid models. All models complied with the China V emission standard. Below are the specific details about the powertrain combinations of the gasoline models: 1. A 2.0L inline 4-cylinder naturally aspirated engine, paired with a CVT continuously variable transmission, delivering a maximum power of 114KW, maximum horsepower of 155PS, and maximum torque of 190N·m. 2. A 2.4L inline 4-cylinder naturally aspirated engine, paired with an 8-speed dual-clutch transmission, delivering a maximum power of 153KW, maximum horsepower of 208PS, and maximum torque of 247N·m.
19
3
Share

What type of engine oil does the Geely Xingrui use?

Geely Xingrui uses synthetic engine oil with a viscosity grade of 0W-20. This type of oil features excellent high and low-temperature fluidity, relatively low viscosity, and superior low-temperature flow characteristics, providing better engine protection during cold starts. Relevant information about engine oil is as follows: 1. Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), with a density of approximately 0.91×10³ (kg/m³), serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. It is often referred to as the 'blood' of automobiles. 2. Composition: Engine oil consists of two main components: base oil and additives. Base oil is the primary constituent of lubricating oil, determining its fundamental properties, while additives compensate for and enhance the performance shortcomings of the base oil, imparting new characteristics, making them an essential part of lubricating oil.
16
1
Share

What is the minimum ground clearance of the Lynk & Co 03 chassis?

The minimum ground clearance of the Lynk & Co 03 is approximately 130mm. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting plane when the vehicle is fully loaded and stationary. It is used to indicate the vehicle's ability to overcome obstacles such as rocks and tree stumps. Differences between high and low chassis vehicles: 1. Vehicles with high chassis, commonly seen as SUVs and off-road vehicles, have a higher ground clearance, providing strong off-road capability. Even when encountering waterlogged roads, they can pass safely with little worry about scraping the chassis. However, high-chassis vehicles tend to have poorer shock absorption, resulting in relatively lower comfort. During cornering, the body roll is more pronounced, requiring lower speed limits. 2. Vehicles with low chassis, typically sedans and sports cars, have a lower center of gravity due to their low chassis, which improves tire grip. This greatly assists in vehicle acceleration and starting. However, their off-road capability is weaker, requiring extra caution when driving on bumpy roads to avoid scraping the chassis, thus demanding higher road conditions.
13
3
Share

What is the first maintenance mileage for the Nissan Sylphy Classic?

The first maintenance for the Nissan Sylphy Classic is at 1000 kilometers or one month, whichever comes first. The first maintenance for the Sylphy Classic requires an oil change, as the initial maintenance period is the running-in period for the vehicle. Even though the new car has undergone running-in at the factory, the surfaces of the parts are still relatively rough. Below are the details regarding the Sylphy's first maintenance items: 1. The main task for the Sylphy's 1000-kilometer first maintenance is the replacement of engine oil and the oil filter. 2. Inspect the doors and engine hood, check if the lights are functioning properly, examine tire pressure, perform tire rotation, test the tire pressure monitoring system for any abnormalities, and conduct wheel alignment and balancing. 3. Clean and inspect the windshield and wiper blades, check if the accelerator pedal operates smoothly, verify the smooth operation of the brake pedal, inspect the parking brake operation, examine all components of the seat belt system, check for any changes in steering conditions such as excessive play, heavy steering, or unusual noises, and ensure all warning lights and buzzers are functioning properly.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.