What type of engine oil is used in the GAC Honda Haoying?

1 Answers
Phillips
07/29/25 11:21pm
Both the Honda Haoying 1.5T and 2.0 models use 0W20 (4L) fully synthetic engine oil, with a replacement interval of 5,000 kilometers. The method for selecting engine oil is as follows: 1. Naturally aspirated engines: These engines have lower requirements for engine oil and can use mineral or semi-synthetic oil. If the budget allows, fully synthetic oil can be used. 2. Turbocharged engines and naturally aspirated engines: Their engine structures are more precise, operating conditions are more demanding, and they require higher-performance engine oil with better fluidity, preferably fully synthetic oil. 3. Viscosity: For viscosity selection, 5W is generally sufficient in winter for most regions, but in some northern areas (such as Heilongjiang), 0W is recommended for better low-temperature fluidity to adapt to local environmental conditions. 4. High-temperature viscosity: For high-temperature viscosity, 30 is typically used. However, if driving frequently in congested areas, for older vehicles, or for heavy-duty vehicles in long-distance transport, the lubricant viscosity can be appropriately increased, such as using 0W40 oil.
Was this review help?
15
1
Share
More Forum Discussions

What is the fuse reference table for the Mercedes-Benz C200?

The fuse box of the Mercedes-Benz C200 is located on the left side of the center console, inside the cover panel above the driver's footwell. The numbering and fuse reference table are as follows: 1. Keyless entry controller. 2. Cigarette lighter. 3. Tire pressure control. 4. Passenger side cigarette lighter. 5. Passenger side Intelligent Light Module (ILM). 6. Passenger side door. 7. Sunroof. 8. Air conditioning controller. 9. Front seat heating. 10. Communication. 11. Passenger seat lumbar support. 12. Communication MMI. Steps to replace a fuse: 1. Before locating the fuse box, turn off the engine and power supply. 2. Find the corresponding position of the fuse box, and carefully pry open the cover panel with a screwdriver or other tools. Then, on the inner side of the cover panel, you can locate the corresponding component fuse based on the information. 3. Use a light or a test pen to conduct a preliminary check on the fuse. Confirm that it has blown before considering replacement. 4. The new fuse should match the old one in size, color, and all parameters. 5. If the component still does not respond after replacing the fuse, take the vehicle to a repair shop as soon as possible.
17
0
Share

What is the Rearview Mirror Memory Function?

The rearview mirror memory function refers to a system where the mirror angle of the rearview mirror, combined with the driver's height and seat position, forms an optimal viewing setup. Each driver can adjust the rearview mirror to their preferred angle based on their height and driving habits, then save this setting. When another driver adjusts the mirror angle, the memory function can be activated to restore the mirror to the previously saved position. The adjustment methods for rearview mirrors are as follows: 1. Left Rearview Mirror: Using an electric switch or manual adjustment, the mirror can be moved up, down, left, or right. The optimal angle for the left rearview mirror is when the road environment occupies most of the mirror, with only 1/4 of the car body visible, and the vanishing point of the road should be centered in the mirror. 2. Right Rearview Mirror: Similarly, the right rearview mirror should primarily show the road environment. Since the right mirror is farther from the driver's line of sight, the vanishing point should be positioned higher in the mirror to maximize road visibility, and again, only 1/4 of the car body should be visible. 3. Interior Center Rearview Mirror: In addition to the exterior left and right mirrors, there is also an interior rearview mirror. Adjusting this mirror is relatively simpler. Just manually adjust it so that the distant horizon is centered in the mirror.
3
2
Share

What are the main functions of the engine lubrication system?

The main functions of the engine lubrication system: 1. Lubrication: Engine oil forms an oil film between moving parts, reducing friction resistance and power loss, and minimizing component wear; 2. Cooling: The fluidity of engine oil helps dissipate heat from engine components, preventing overheating and potential damage; 3. Cleaning: Circulating engine oil carries away metal particles generated during operation, dust from the atmosphere, and solid residues from fuel combustion, preventing abrasive wear between parts; 4. Sealing: The viscosity of engine oil allows it to adhere to the surfaces of moving parts, enhancing sealing effectiveness and reducing gas leakage.
6
1
Share

What is the Function of Transmission Fluid?

Transmission fluid functions to maintain the cleanliness of the gear system, ensuring the proper operation of the transmission and extending the lifespan of the transmission components. It provides effective lubrication even in low-temperature conditions and reduces fluid loss under severe operating conditions. Automatic transmission fluid (ATF) is specifically designed for automatic transmissions. Due to significant differences in operating conditions and technical requirements, using engine oil as transmission fluid was quickly phased out. Today, specialized automatic transmission fluid serves as both the hydraulic fluid for torque converters and the lubricant for planetary gear structures, as well as the hydraulic fluid for shifting mechanisms.
20
1
Share

Does the Audi Q3 come with a first aid kit?

The Audi Q3 does not come with a first aid kit, as only certain car models are equipped with one. A car first aid kit is a package containing medical emergency equipment and medications that can be used for self-rescue in the event of a traffic accident causing injuries or fatalities. It is one of the effective means to reduce traffic fatalities. The Audi Q3 is an SUV based on the same PQ35 platform as the Volkswagen Tiguan. The dimensions of this car are 4385mm in length, 1831mm in width, and 1608mm in height, with a wheelbase of 2603mm. The Audi Q3 offers two engine options: a 1.4-liter turbocharged engine and a 2.0-liter turbocharged engine.
15
1
Share

What license plate is issued for hybrid vehicles?

Hybrid vehicles are issued new energy vehicle license plates. The new energy vehicle license plates implement segmented management based on different vehicle types, with the letter D representing pure electric vehicles and the letter F representing non-pure electric vehicles, including plug-in hybrids and fuel cell vehicles. New energy passenger cars use gradient green license plates, while new energy trucks use yellow-green dual-color plates. In the initial stage of operation, hybrid vehicles primarily rely on the electric motor. The engine only engages when a certain speed is reached to fully leverage their respective advantages. The electric motor in hybrid vehicles is mainly used during vehicle startup or braking energy recovery and does not require plug-in charging, offering a very limited pure electric driving range.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.