···
Log in / Register

What type of engine oil is used for the Peugeot 308?

4 Answers
Lilian
07/29/25 2:33pm
The Peugeot 308 uses engine oil of the specification 5W30, with the recommended maintenance oil being Total SL-5W-30. Here are the reasons: 1. Compared to 5W40, 5W30 has the same low-temperature fluidity but differs in high-temperature performance, where 5W40 offers better high-temperature protection and sealing. 2. Due to increased viscosity leading to higher engine running resistance and increased fuel consumption, 5W30 is relatively more suitable for the Peugeot 308's engine. Approximately 4L of oil is required when changing the oil for the Peugeot 308. Additional information: Naturally aspirated engines have relatively modest requirements for oil quality and can use mineral oil, semi-synthetic oil, or fully synthetic oil.
Was this review help?
20
5
Share
RebeccaDella
08/13/25 6:55am
When driving my Peugeot 308, I checked the manual. My car is the 2018 petrol version, and it recommends using 0W-30 fully synthetic oil that meets the ACEA C2 standard. This oil has good fluidity, provides strong engine protection during cold starts, and minimizes part wear. I usually change the oil every 10,000 kilometers—any longer might lead to carbon buildup. Peugeot officially recommends brands like Total or Castrol. I tried changing it myself during a home maintenance session, and it resulted in lower fuel consumption and fewer headaches. If the engine is an older diesel version, you might need 5W-40 instead. That’s why I always say don’t just listen to others—checking your manual is the most reliable approach. Pay attention to certification marks when choosing oil, avoid cheap counterfeit products, as they can shorten your car’s lifespan. Regular maintenance is key.
Was this review help?
16
4
Share
Expand All
MacIan
10/11/25 3:06am
As a DIY-loving car owner, I always change the oil for my 308 myself. Choosing 5W-30 full synthetic is the safest bet, with ACEA C2 certification as the baseline—the viscosity is just right for this car's turbocharged engine. Before getting started, gather all the necessary items: a new oil filter, a funnel, and safety gloves. Operate when the oil temperature is low, and dispose of the old oil responsibly. Don’t cheap out and use something like 10W-40, which is too thick—cold starts will be harder, and it can lead to oil burning. I change it every 8,000 kilometers, and mainstream brands like Mobil are fine. Remember, using the wrong oil grade will cause engine noise—check the manual to confirm the correct version, and address issues promptly to avoid costly repairs.
Was this review help?
11
4
Share
Expand All
DelJocelyn
11/24/25 4:13am
From an environmental perspective, using low-viscosity 0W-30 oil in the 308 can improve efficiency, reduce friction to lower fuel consumption, and decrease emissions for a greener planet. Full synthetic oil degrades faster, with oil change intervals within 15,000 km, keeping the engine clean. Choose certified oils like ACEA C2, a common standard for Peugeot. Avoid low-quality products that generate more waste, and maintain regularly to extend the vehicle's lifespan.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

What is the relationship between Porsche and Volkswagen?

Porsche is a subsidiary of the Volkswagen Group. Porsche is a world-renowned luxury car brand under Volkswagen AG, also translated as 'Porsche', headquartered in Stuttgart, Germany, and is one of the main representatives of European and American automobiles. Its main models include the 911, Boxster, Cayman, Panamera, Cayenne, and Macan. Porsche was founded in Stuttgart and is renowned worldwide for producing high-end sports cars. The Porsche Boxster is a two-door, two-seater convertible sports car by Porsche, featuring a mid-engine, rear-wheel-drive design, which first debuted as a concept car at the North American International Auto Show.
12
4
Share

What are the dimensions of the Dongfeng AX7?

The dimensions of the Dongfeng AX7 are 4645mm in length, 1880mm in width, and 1690mm in height, with a wheelbase of 2715mm. As a mid-cycle facelift model, this car has undergone certain upgrades in terms of exterior and configuration, mainly optimizing the features and upgrading the engine's emission standards. In terms of exterior design, the car adopts an interactive geometric design concept. The front face features a more three-dimensional design, with a blackened grille and a thicker chrome trim for embellishment. The lower grille adopts a horizontal design, working in harmony with the car's headlights to stretch the horizontal visual width while making the front end appear more refined.
1
0
Share

What is the operation method for one-button start in a manual transmission car?

Manual transmission one-button start operation method is: 1. Press the clutch and brake, shift to neutral; 2. Press the start button once, after the ACC light turns on, press the start button again; 3. The one-button start turns green, and the vehicle begins self-check; 4. When the vehicle completes self-check, press the brake and press the one-button start again. Manual transmission cars use a manual shift mechanical transmission to adjust speed. The gear shift lever must be manually moved to change the gear meshing position inside the transmission, altering the gear ratio to achieve speed change. The gear shift lever can only be moved when the clutch is pressed.
6
1
Share

What specific vehicle types can a B1 driver's license drive?

B1 driver's license is authorized to drive medium-sized passenger vehicles (including urban buses with a capacity of 10 to 19 passengers), as well as other vehicle types permitted by C1, C2, C3, C4, and M licenses. Medium-sized passenger vehicles are defined as vehicles with a length of less than 6 meters and a seating capacity of more than 9 but fewer than 20 people. Below is relevant information about the B1 driver's license: Application requirements: You cannot directly apply for a B1 license; it can only be obtained through an upgrade. Applicants must have held a (C1) driver's license for at least three years and be between the ages of 21 and 50. Additionally, they must not have any full-point (12 points) violations in the current scoring cycle (this year) or the most recent scoring cycle (last year) before applying. The upgrade application must be submitted to the vehicle management office in the applicant's registered residence, as regulations stipulate that the (B1) upgrade can only be processed at the driver's local vehicle management office, not at a temporary residence. Conditions that disqualify an upgrade: Causing a fatal traffic accident and bearing full or primary responsibility; driving under the influence of alcohol; having a record of driving under the influence of alcohol in the current scoring cycle or the three most recent consecutive scoring cycles before applying; having a record of driving more than 50% over the speed limit in the current scoring cycle or the three most recent consecutive scoring cycles before applying, without the driver's license being revoked.
20
4
Share

What engine is used in the Dongfeng Fengshen L60?

Dongfeng Fengshen L60 is equipped with two types of engines: a 1.6L naturally aspirated engine and a 1.8L naturally aspirated engine. The 1.6L naturally aspirated engine delivers 117 horsepower and a maximum torque of 150 N·m, featuring multi-point fuel injection technology, an aluminum cylinder head, and a cast iron cylinder block, paired with a 5-speed manual transmission. The 1.8L naturally aspirated engine produces 139 horsepower and a maximum torque of 172 N·m, also featuring multi-point fuel injection technology, an aluminum cylinder head, and a cast iron cylinder block, paired with either a 5-speed manual transmission or a 6-speed automatic manual transmission. This vehicle is a compact sedan, with a front MacPherson independent suspension and a rear torsion beam non-independent suspension.
18
0
Share

How to Activate BYD Cloud Services?

Steps to activate BYD Cloud Services: 1. First, register personal information and vehicle details at a 4S dealership to enable and sign up for the cloud service; 2. For initial use, activation is required by downloading and installing the BYD Cloud Service app on your mobile device; 3. After installation, open the app and log in using the email, phone number, or ID card number registered at the 4S dealership; 4. Agree to the BYD Cloud Service User Agreement, enter the password provided in the password letter, and upon successful login, the service will be activated, allowing you to start using BYD Cloud Services. BYD is a Chinese automotive brand primarily manufacturing commercial vehicles, family cars, and batteries.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.