What type of engine oil is used for the ninth-generation Accord?

2 Answers
SanReed
08/27/25 5:53am
1. Brand: For the ninth-generation Accord, it is recommended to use the engine oil specified by GAC Honda or other commercially available engine oils with viscosity suitable for the ambient temperature, such as Mobil Penzzoil, Mobil, Castrol, etc. 2. Grade: The 2.0 and 2.4 engines perform best with 20 or 30-grade oil. Information about engine oil types is as follows: 1. API Quality Grade: You can choose engine oil based on the grade corresponding to the engine model, with the viscosity grade being particularly important. 2. SAE Viscosity Grade: According to the SAE viscosity grade classification, there are 6 types of winter oil, 5 types of summer oil, and 16 types of all-season oil. The 6 winter oils are 0W, 5W, 10W, 15W, 20W, and 25W. The "W" stands for Winter, and the smaller the number before it, the better the oil's fluidity and the lower the temperature it can handle. The 5 summer oils are 20, 30, 40, 50, and 60. The larger the number, the higher the oil's viscosity and the better its high-temperature protection, making it suitable for higher temperature environments. The 16 all-season oils are 5W20, 5W30, 5W40, 5W50, 10W20, 10W30, 10W40, 10W50, 15W30, 15W40, 15W50, 20W20, 20W30, 20W40, and 20W50.
Was this review help?
5
4
Share
StBenjamin
09/09/25 4:49am
My ninth-generation Accord has been running for seven or eight years, always using 0W-20 full synthetic oil, and the engine operates smoothly without excessive fuel consumption. The Honda manual recommends this viscosity grade because its low viscosity reduces friction and improves efficiency. I change the oil every 5,000 miles, choosing brands like Mobil 1 or Honda Genuine Oil to avoid using the wrong type, which could lead to carbon buildup or a spike in fuel consumption. Regularly checking the oil level to ensure it stays between the min-max marks is crucial, as failing to do so might damage the engine during cold starts. Sticking to this routine can extend the car's lifespan by over a decade—my car still runs like new and is incredibly hassle-free!
Was this review help?
16
2
Share
Expand All
More Forum Discussions

What does it mean when the ABS light appears on the dashboard?

There are various conditions when the ABS light is on, with different causes and solutions for each condition. The details are as follows: Condition 1: ABS warning light stays on (most common). Cause 1: The ABS wheel speed sensor's sensing part is covered by mud, sludge, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay can lead to signal issues and system failure. Solution: Check the wiring connections and reconnect any loose parts. Condition 2: ABS warning light intermittently turns on but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. The ABS warning light turns off as the engine speed increases and voltage rises. The ABS system power supply voltage is too low, possibly due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). Condition 3: The ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS control unit malfunction. Solution: Loosen and retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR control unit. Condition 4: ABS warning light turns on during high-speed driving. Cause: The ABS control unit detects a significant difference between rear and front wheel speeds during high-speed driving; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's recommended tire and wheel rim specifications, usually found on the label near the fuel tank cap. Condition 5: ABS warning light intermittently turns on. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and push the brake switch linkage down fully with your fingers, then release the pedal to complete self-positioning; replace the brake light switch if necessary. If the ABS warning light is on, it is advised not to continue driving. An illuminated ABS light indicates a fault in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's path, posing significant safety risks.
16
0
Share

What to Do If a Beginner Driver Frequently Stalls the Car?

Solutions for beginners who frequently stall the car: 1. Clutch control: Proper clutch control during startup is key to avoiding stalling. Beginners often struggle with clutch operation, especially in manual transmission vehicles. If the clutch is released too slowly, it's easy to stall; 2. Throttle follow-up: Following up with the throttle is as important as clutch control. Simply lifting the clutch without applying throttle, even if the vehicle moves slowly, can easily cause stalling; 3. Using the handbrake: Sometimes beginners may experience wheel spin during startup, which can lead to panic and stalling. In such cases, using the handbrake helps. Before starting, pull the handbrake tight, lift the clutch halfway, release the handbrake, and follow up with the throttle to prevent wheel spin during startup.
6
3
Share

How to Use the Tiptronic Transmission in Sagitar?

Sagitar's Tiptronic transmission is essentially an automatic transmission but incorporates manual control. The operation method is as follows: Press the brake pedal and pull the gear lever downward to shift into D (Drive) mode, then push the lever to the right to engage manual mode. You can manually upshift or downshift based on the vehicle speed. The Sagitar measures 4,544 mm in length, 1,760 mm in width, and 1,461 mm in height. The Sagitar is a spacious A-segment comfort sedan that perfectly blends German engineering with modern dynamic styling. As a German A-segment sedan, the Sagitar offers more comfortable space, enhanced safety features, increased human-centric configurations, and more efficient and agile driving performance.
13
4
Share

How to start the Leopaard CS9 when the key is out of battery?

Leopaard CS9 key out of battery starting method: You can place the remote key in the glove box or near the start button, and the car will sense the key to start. If unsuccessful, you can only replace the key battery before starting. The car can start the vehicle with one button, turn off with one button, automatically open the door, and lock the door by using the one-button start function. The Leopaard CS9 is a small SUV launched by Leopaard Auto, with a body length, width, and height of 4315mm, 1840mm, and 1650mm respectively, and a wheelbase of 2600mm. The Leopaard CS9 is equipped with a 122-horsepower pure electric motor, with a total power of 90kw and a total torque of 260nm.
13
1
Share

How to Replace the Key Battery for Honda Vezel?

Steps to replace the key battery for Honda Vezel: First remove the metal key, then use a flat-head screwdriver to pry open the plastic shell along the middle gap. The Vezel key allows convenient remote locking and unlocking both day and night without needing to locate the keyhole. The battery models differ between the 1.5L and 1.8L engine variants. A smart key generally consists of transmitter and receiver components. The transmitter emits infrared signals that can open one or two doors, the trunk, and fuel filler cap, while also controlling windows and sunroof. More advanced smart keys resemble credit cards - when the driver touches the door handle, the central locking system activates by sending a wireless query signal, and the car lock automatically opens upon receiving the correct response from the smart key card.
4
2
Share

Why does the car shake severely when starting?

Reasons for severe shaking when the car starts: 1. Engine mechanical failure, such as uneven cylinder pressure in each cylinder; 2. Intake system failure, such as excessive carbon deposits on intake valves and intake pipes, excessive dirt on throttle valves and intake pipe inner walls; 3. Engine management system failure, such as incorrect coolant temperature and intake air temperature signals, wiring faults; 4. Ignition system failure, such as excessive carbon deposits on spark plugs or incorrect gap, leakage in high-voltage wires and distributor caps, damaged ignition coils; 5. Fuel supply system failure, such as injectors not closing tightly or being blocked due to excessive internal gum and carbon deposits in the nozzles.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.