What type of engine oil is used for Dongfeng Fengshen AX3?

1 Answers
VanCorbin
07/30/25 8:12am
Dongfeng Fengshen AX3 uses 5W30 engine oil, which provides lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption for the engine. The Dongfeng Fengshen AX3 is positioned as a compact SUV, featuring front-engine, front-wheel-drive configuration across all models, with no four-wheel-drive versions available. The vehicle measures 4520 mm in length, 1740 mm in width, and 1562 mm in height, with a wheelbase of 2620 mm. It is equipped with ventilated disc brakes at the front and disc brakes at the rear, a hand-operated parking brake, MacPherson strut front suspension and torsion beam rear suspension, and electric power steering. The Dongfeng Fengshen AX3 is powered by either a 1.0T or a 1.6L engine, paired with one of three transmission options: a 5-speed manual transmission, a 4-speed automatic transmission, or a 6-speed dual-clutch transmission.
Was this review help?
12
4
Share
More Forum Discussions

How to Remove Car Taillight Film?

To remove adhesive residue from hard surfaces like stainless steel basins or glassware, you can use nail polish remover or alcohol. After peeling off the label, apply non-greasy nail polish remover to the surface and gently wipe with a soft cloth. Industrial alcohol or gasoline can also be used to eliminate these marks. Methods for removing car taillight film are as follows: 1. For adhesive on plastic products, use a hairdryer on the hot setting to heat the adhesive, then slowly peel it off; 2. Use an eraser to rub the area, then remove any eraser debris; 3. Lemon juice can be used for cleaning; 4. Hand cream can also help remove adhesive because it contains a large amount of water, which in turn contains a certain amount of surfactants. These surfactants have excellent wetting, penetrating, and dissolving capabilities, allowing them to quickly penetrate between the adhesive and the surface, thus achieving the goal of removal. Similar products like facial cream, face wash, and dishwashing liquid also have some effect.
18
3
Share

How to Prevent Stalling When Starting on a Slope with an Automatic Transmission?

To prevent stalling when starting on a slope with an automatic transmission, follow these steps: 1. Press the brake pedal and engage the handbrake simultaneously; 2. Shift the gear to L (Low) or S (Sport) mode, then gradually apply the throttle; 3. When the car's forward momentum is restrained by the handbrake, slowly release the handbrake to allow the vehicle to climb the slope smoothly. An automatic transmission refers to a system where the driver does not need to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The gear positions in an automatic transmission vehicle are: 1. P (Park) for parking; 2. R (Reverse) for backing up; 3. N (Neutral) for no gear engagement; 4. D (Drive) for forward movement; 5. S (Sport) for sport mode.
1
0
Share

What items need to be replaced during a car's first maintenance?

Items that need to be replaced during a car's first maintenance include: engine oil, oil filter, cabin air filter, and engine air filter. Other tasks involved in the first maintenance are: 1. Checking the levels of coolant, battery fluid, and windshield washer fluid; 2. Inspecting the brake and clutch fluid levels, as well as the power steering fluid level; 3. Examining tire pressure and wear, and tightening screws to the specified torque. The benefits of a car's first maintenance include: 1. Ensuring the vehicle performs at its best; 2. Improving the vehicle's efficiency and reducing wear on parts and tires; 3. Enhancing driving safety; 4. Preventing potential hazards caused by vehicle issues; 5. Reducing noise and environmental pollution; 6. Maintaining the vehicle's appearance and preventing damage.
6
4
Share

Why Wear Gloves for Subject One Exam?

Wearing gloves during the Subject One exam is to prevent sweaty palms, which could otherwise lead to accidental touches on the answers. Precautions for the Subject One exam: 1. Arrive early: Regardless of which driving school you're from, try to arrive about half an hour early before the exam; since most examinees are taking Subject One for the first time, arriving early allows the team leader from each driving school to distribute admission tickets and explain exam techniques and key points to pay attention to. 2. Bring your ID card: Carry your ID card, as it will be scanned along with the admission ticket on a card reader to assign random seat numbers before entering the exam hall. 3. Find your seat: After being assigned a seat number, locate your seat; it's especially important not to click "Confirm" on the screen until the invigilator instructs you to do so. Simply sit in your seat without any operations (otherwise, you may be asked to leave the exam hall).
11
0
Share

What Do the Numbers on Wheel Sizes Mean?

Automotive tire numbers and letters represent tire parameters. Taking 215/70R15 as an example, 215 indicates the tire section width is 215mm; 70 is the aspect ratio, meaning the tire sidewall height is 70% of the tire section width, R stands for radial tire, and 15 means the tire fits a 15-inch wheel hub. Below is relevant information about tires: 1. Tire lifespan: The wear life of tires is 30,000-50,000 kilometers. If the tire hasn't reached the wear limit or mileage but has been in use for 5 years or shows extensive sidewall cracks, it should be replaced. 2. Tire material: The main component of tires is rubber. The maximum storage and anti-aging duration for rubber, from natural latex to EPDM and nitrile, does not exceed 10 years, with the average service life of various rubber products in use being 3-5 years.
11
0
Share

How to Drive a Car with Manual and Automatic Transmission?

Car with manual and automatic transmission has M+ and M- buttons, which can be used to set the gear of the vehicle and switch between manual mode and automatic mode. Switch to manual mode in the following situations: 1. When accelerating to overtake. Manual mode accelerates faster and more powerfully than automatic mode, so it is better to switch to manual mode when you want to overtake. 2. When going downhill for a long distance. In this case, using manual mode to go downhill is more convenient and can reduce the number of times the car brakes, thereby reducing tire wear. 3. When encountering continuous undulating roads. At this time, using manual mode can not only improve driving stability and safety but also reduce the wear and tear on the vehicle caused by continuous braking. 4. When climbing a slope. Switching to manual mode at this time can give the vehicle more power, making it easier to climb the slope.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.