What type of engine oil is used for Beijing Hyundai Verna maintenance?

1 Answers
LylaMarie
07/30/25 2:25am
Beijing Hyundai Verna maintenance uses 5W20 engine oil, which is the original factory oil for Beijing Hyundai. Any engine oil with the same specification can be used. Taking the 2020 Hyundai Verna as an example, it belongs to the compact car category with body dimensions of: length 4300mm, width 1705mm, height 1460mm, a wheelbase of 2570mm, a fuel tank capacity of 43L, and a curb weight of 990kg. The 2020 Hyundai Verna features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.4L naturally aspirated engine, delivering a maximum horsepower of 95PS, a maximum power of 70kW, and a maximum torque of 132.4Nm, paired with a 5-speed manual transmission.
Was this review help?
2
4
Share
More Forum Discussions

Why does the 12V auxiliary battery of an electric vehicle frequently run out of power?

The following are the main reasons why the 12V auxiliary battery of an electric vehicle frequently runs out of power: 1. Some system settings only supply power to the auxiliary battery when the vehicle is started: Certain electric vehicle system configurations are designed such that the high-voltage battery only charges the auxiliary battery when the car is running, and stops supplying power once the vehicle is turned off. Therefore, sometimes the auxiliary battery is already severely depleted, but the owner turns off and locks the car to charge the electric vehicle. At this point, the charging process cannot replenish the auxiliary battery, resulting in the auxiliary battery being completely drained after sitting overnight. 2. Excessive charging duration: Some electric vehicles can recharge the auxiliary battery even when turned off during charging. However, once charging is complete, even if the charging cable remains connected, the auxiliary battery will not receive additional charges—meaning each charging session only replenishes the auxiliary battery to full capacity once. Meanwhile, the auxiliary battery continues to power various electronic control modules and electrical components in the vehicle, slowly discharging until it is completely depleted. 3. Electric vehicle in an extremely low-power state: Sometimes, when an electric vehicle is in an extremely low-power condition, recharging may no longer be able to replenish the auxiliary battery. This is because the pathway for the converter to charge the auxiliary battery itself requires power from the auxiliary battery to maintain contact closure. Once the auxiliary battery lacks sufficient power to keep the contacts closed, the high-voltage battery cannot recharge the auxiliary battery.
13
2
Share

How to Handle Traffic Violations When Driving Someone Else's Car?

If the violation was captured by an electronic eye, you need to prepare the vehicle license. If it was a speeding violation, you need to prepare the vehicle license, driver's license, and a copy of each. After preparing the required materials, go to the vehicle management office to check the violation record and fill out an acknowledgment form. Take the acknowledgment form to the bank designated by the vehicle management office to pay the fine. If the violation occurred in another location, you generally need to handle it at the local traffic police station or vehicle management office where the violation took place.
10
4
Share

How to Change the Gear Oil for Suzuki Choriander 150?

Locate the position of the odometer cable on the transmission, remove the odometer cable shaft cover, and slowly pull out the small gear. Remove the gear oil drain plug from the transmission, drain all the old gear oil, and tighten the drain plug. Start refilling the gear oil from the odometer axis hole. Reinstall the removed gears according to the operation manual.
12
0
Share

What are the differences between 1.5T and 2.0L engines in cars?

In current automotive technology, the power parameters of 1.5T and 2.0L engines are quite similar, or even higher in some cases. For example, the Honda Avancier 1.5T has a maximum horsepower of 193Ps and a maximum power of 142KW, while the Nissan X-Trail 2.0L has a maximum horsepower of 150Ps and a maximum power of 110KW. Specific details are as follows: Driving on regular roads: The fuel consumption between 1.5T and 2.0L engines is almost the same. However, considering the vehicle's weight, the 1.5T engine consumes more fuel during the initial acceleration phase because the turbocharger requires certain RPM to engage. In congested traffic: Frequent stops and starts cause the turbo to switch between working and non-working states, which can lead to some jerky sensations. In contrast, the 2.0L naturally aspirated engine performs more smoothly under such conditions, which is one of the advantages of naturally aspirated engines. On highways: The 2.0L engine tends to have higher fuel consumption. The 1.5T engine, with its smaller displacement, shows a significant power boost and lower fuel consumption once the turbo engages. However, there is also an issue: the 1.5T engine lacks the sustained power (or "afterburn") of the 2.0L naturally aspirated engine at higher speeds. Since most driving conditions don't require RPMs between 4500 and 6000, this lack of afterburn can generally be ignored.
13
0
Share

How to Reset the Maserati Parking Brake?

Place the vehicle in park or neutral position, turn on the ignition, and the parking brake system will enter maintenance mode. The EPB switch apply/release function will be disabled. Hold the parking brake switch in the apply position. Wait for 2 seconds. Press the accelerator pedal to fully open the throttle. Wait for another 2 seconds. Turn off the ignition and then immediately turn it back on. Upon hearing a sound, confirm that the parking brake has been released from maintenance mode. Release the accelerator pedal and return the parking brake switch to the neutral position.
10
2
Share

How to Start and Turn Off the WM EX5?

The vehicle is equipped with a one-key start function. The doors feature sensor-based locks that automatically unlock when the key is detected nearby. With the key on your person, first press the brake pedal. After starting the vehicle, you can shift gears by moving the gear selector. Press the one-key start button while holding the brake pedal to start the vehicle. The vehicle will power on and start only after sensing the key. Ensure the vehicle is stationary by pressing the brake, shift to N (Neutral), engage the parking brake, shift to P (Park), and then release the brake.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.