What type of engine oil is suitable for Vios?

1 Answers
OOmar
07/29/25 11:07pm
Vios can use engine oil with a viscosity of 5W-30. Mainstream engine oil brands include: Mobil, Castrol, Shell, and Dusso Lubricants. Engine oil plays multiple roles such as lubrication and wear reduction, auxiliary cooling, sealing and leakage prevention, rust and corrosion protection, as well as shock absorption. It is often referred to as the "blood" of a car. Below are some related details: 1. Engine oil consists of base oil and additives. Base oil is the main component of lubricants, determining their fundamental properties, while additives compensate for and improve any shortcomings in the base oil's performance, providing certain new characteristics. Additives are an essential part of lubricants. 2. The SAE viscosity classification for winter oils includes grades: 0W, 5W, 10W, 15W, 20W, 25W. The symbol 'W' stands for winter, and the smaller the number before 'W', the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the applicable minimum temperature. 3. The SAE viscosity classification for summer oils includes grades: 20, 30, 40, 50. The larger the number, the higher the viscosity and the higher the applicable maximum temperature. 4. The SAE viscosity classification for all-season oils includes grades: 5W-20, 5W-30, 5W-40, 5W-50, 10W-20, 10W-30, 10W-40, 10W-50, 15W-20, 15W-30, 15W-40, 15W-50, 20W-20, 20W-30, 20W-40, 20W-50. The smaller the number representing the winter part (indicating a lower applicable minimum temperature), and the larger the number representing the summer part (indicating a higher applicable maximum temperature), the wider the applicable temperature range.
Was this review help?
9
5
Share
More Forum Discussions

What are width indicator lights?

Width indicator lights, also known as clearance lights or commonly referred to as small car lights, are installed at the highest points at the front and rear of a vehicle. Their purpose is to indicate the presence and approximate width of the vehicle, aiding other drivers in making judgments during passing or overtaking. The width indicator lights are positioned at higher points on the front and rear of the vehicle; the front width indicators are located beside the headlights, while the rear ones are integrated with the brake lights. The main uses of width indicator lights include: 1. Temporarily parking by the roadside at night—width indicator lights should be turned on; 2. Serving as driving lights on well-lit roads without needing to use headlights; 3. Activating width indicator lights during rain, snow, fog, nighttime, or other conditions with poor visibility to alert passing vehicles.
12
2
Share

What does it mean when the cruise control indicator light is on?

When the cruise control indicator light is on, it means the cruise control function is activated and can be turned off by pressing the button again. The cruise control button is usually located near the steering wheel and mainly comes in three types: lever-style, steering wheel button-style, and steering wheel control group-style. Its function is to maintain the vehicle speed as set by the driver without the need to press the accelerator pedal, allowing the car to travel at a constant speed. Cruise control is used to maintain a steady speed for the vehicle. Once the car is set to cruise mode, the engine's fuel supply is controlled by the computer, which continuously adjusts the fuel supply based on road conditions and the vehicle's driving resistance to keep the car at the set speed. This eliminates the need to operate the accelerator, reduces unnecessary speed changes, and can save fuel.
14
0
Share

Is Automotive Urea Solution Harmful to the Human Body?

Automotive urea solution is basically harmless to the human body. The following is a related introduction to automotive urea solution: 1. Working principle: In order for trucks to meet the National IV emission standards, the SCR system (Selective Catalytic Reduction technology) must be used in exhaust gas treatment. This system requires the use of urea solution to treat nitrogen oxides in the exhaust gas, making urea an essential product. 2. Raw materials: Urea refers to a urea aqueous solution with a urea concentration of 32.5% and a solvent of ultra-pure water. The raw materials are special urea for automotive use and ultra-pure water. The urea is mainly obtained from the purification of industrial urea, and automotive urea must use ultra-pure water of electronic grade.
5
3
Share

What does the circle a on the car mean?

The circle a on the car is the auto hold system of the car. Cars with electronic parking brakes will be equipped with this system. If you want to use this system, the driver needs to manually turn it on. After turning on this switch, when the car brakes during driving and stops the car stably, even if the brake pedal is lifted, the car will not continue to move. Only when the accelerator pedal is pressed again will the car continue to move. The auto hold system is a technical application that can realize the automatic parking brake during the operation of the car. This technology enables the driver not to need to brake for a long time when the vehicle stops, and can avoid unnecessary sliding of the vehicle when the automatic electronic parking brake is activated.
7
3
Share

Which country does the DS brand belong to?

DS is a French brand, belonging to the premium marque under the PSA Peugeot Citroën Group. The DS model lineup includes: DS7, DS4, DS5, DS6, DS9, etc. Taking the 2021 DS7 as an example, its body dimensions are: length 4603mm, width 1891mm, height 1626mm, wheelbase 2740mm, fuel tank capacity 60 liters, and trunk capacity 550 liters. The 2021 DS7 is equipped with a 1.6T turbocharged engine, delivering a maximum power of 133kW and maximum torque of 250Nm, paired with an 8-speed automatic transmission.
8
5
Share

What Causes the Low Airflow of Car Air Conditioning Heating?

The reasons for the low airflow of car air conditioning heating are: 1. The blower power is insufficient or the ventilation ducts are blocked; 2. The air conditioning evaporator and heater radiator are clogged with impurities; 3. The air filter element in the heating duct is too dirty. The method to turn on the heating in a car air conditioning system is: 1. After starting the vehicle, turn off the AC button; 2. Wait for the water temperature to rise to the normal value, then turn on the air conditioning heating. Car air conditioning, also known as the car air conditioning system, is used to adjust and control the temperature, humidity, air cleanliness, and airflow inside the car cabin to an optimal state. Its functions are: 1. To provide a comfortable riding environment for passengers and reduce travel fatigue; 2. To create good working conditions for the driver.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.