What type of engine oil is suitable for the Vios?

1 Answers
HarmonyRose
07/30/25 10:27am
The Vios is suitable for engine oil with a viscosity of 5W-30. Here are some methods to identify genuine engine oil: 1. Check the packaging appearance. Genuine oil has a one-time-use cap, and the sealing foil at the notch bears the manufacturer's special mark. If these features are missing, it may be counterfeit. To prevent counterfeiting, genuine oil also has special marks on less noticeable areas such as the label sticker, bottom of the can, inside of the can lid, and handle. Counterfeiters often use custom packaging, so comparing the packaging of genuine and fake products can help distinguish them. 2. Examine the oil quality. Genuine oil is light in color, transparent, free of impurities, suspended particles, or sediment, and flows well when shaken. Counterfeit oil may be darker in color, contain impurities or sediment, have a strong or irritating odor, and exhibit poor flow or a stringy texture when touched.
Was this review help?
18
1
Share
More Forum Discussions

What to Do When a Car Battery is Dead?

When a car battery is dead and the vehicle cannot start, an external power source is needed to jump-start the vehicle. Common issues include: 1. Disconnect the negative terminal: As long as the battery is connected to the car, many electrical devices continue to draw power, albeit in small amounts, which can last a long time. Therefore, if the vehicle is not driven for an extended period, it is recommended to disconnect the negative terminal of the battery. 2. Self-discharge: Even when no electrical devices are connected, the battery itself will experience some discharge. If the car remains unused for a long time and is not recharged, starting the engine requires a large amount of power, making it prone to draining. Each time the battery is drained, its performance significantly declines. The battery's capacity diminishes over time with use. 3. Cliff effect: Battery discharge exhibits a cliff effect. New batteries have a relatively linear discharge curve, whereas older batteries with degraded performance show a sharp decline. 4. Temperature factor: Weather conditions also play a role, as low temperatures can significantly reduce battery performance.
17
1
Share

What to Do If the Engine Hood Won't Open?

Try using the button to open the hood or pull the release lever to open it. If necessary, remove the door seal strip. If it still cannot be opened, the only solution is to take it to a repair shop. Functions of the Engine Hood: 1. Airflow Management: For objects moving at high speed in the air, the air resistance and turbulence generated around the moving object directly affect its trajectory and speed. The shape of the engine hood effectively adjusts the direction of airflow relative to the car's movement and the resulting resistance, minimizing the impact of airflow on the vehicle. By managing airflow, air resistance can be broken down into beneficial forces, increasing the front tires' grip on the road and enhancing driving stability. The streamlined design of the engine hood is largely based on this principle. 2. Protection of the Engine and Surrounding Components: Beneath the hood lie critical components of the car, including the engine, electrical circuits, fuel system, braking system, and transmission system, all of which are vital to the vehicle. By improving the strength and construction of the engine hood, it effectively guards against adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle operates normally. 3. Aesthetics: The exterior design of a vehicle is a direct reflection of its value. As a key part of the overall appearance, the engine hood plays a crucial role in enhancing visual appeal and embodying the concept of the entire car. 4. Assisting Driver Visibility: During driving, the driver's ability to correctly assess the road and conditions ahead depends heavily on forward visibility and the reflection of natural light. The shape of the engine hood can effectively adjust the direction and form of reflected light, reducing its impact on the driver. 5. Accident Prevention: The engine operates in a high-temperature, high-pressure, and flammable environment, where overheating or accidental damage to components can lead to explosions, fires, or leaks. The engine hood effectively blocks damage from explosions, acting as a protective shield. It also isolates air and prevents the spread of flames, reducing the risk and extent of fire damage.
19
1
Share

Is it necessary to repair a motorcycle with a blown cylinder?

It is necessary to repair a motorcycle with a blown cylinder, as it generally requires replacing related components such as the cylinder block, piston, piston rings, and valve oil seals. These parts are crucial for the long-term effectiveness of the repair, so they must be replaced together. If the camshaft is also damaged, it should be replaced as well; otherwise, the engine may later develop abnormal noises or overheating issues. A blown cylinder in a motorcycle is a severe mechanical failure caused by insufficient engine oil, clogged oil passages or filters, or a damaged oil pump. Essentially, the cylinder block, piston, and piston rings melt and fuse together due to high-temperature friction caused by lack of lubrication.
18
0
Share

Where is the cabin air filter located on the Chery Fengyun 2?

Chery Fengyun 2's cabin air filter is located at the upper left side of the engine, secured by two screws that fasten the sealing strip. After removing these screws, the cabin air filter becomes visible. The functions of the cabin air filter are as follows: 1. Providing fresh air: It prevents the car windows from fogging up, ensuring clear visibility for the driver and enhancing driving safety; supplies fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety; effectively sterilizes and deodorizes. 2. Ensuring safety and hygiene: Maintains clean cabin air free from bacterial growth, creating a healthy environment; effectively separates solid impurities such as dust, powder, and grinding particles from the air; efficiently blocks pollen to prevent allergic reactions among passengers that could affect driving safety. 3. Adsorbing harmful substances: Captures moisture, soot, ozone, odors, carbon oxides, SO2, CO2, and other pollutants from the air; features strong and durable moisture adsorption capabilities.
19
2
Share

What is the Difference Between Wide Tires and Narrow Tires?

The differences between wide tires and narrow tires are as follows: 1. Applicable vehicle types differ: Wide tires are typically used in mid-to-high-end models, while narrow tires are more commonly found on ordinary models. 2. Applicable rims differ: Wide tires are mounted on larger rims, whereas narrow tires are generally mounted on smaller rims. 3. Sidewall height differs: Narrow tires are taller and thicker, while wide tires are relatively thinner. 4. Price differs: Wide tires are more expensive than narrow tires. Below is a comparison of wide and narrow tires: 1. Compared to narrow tires: Wide tires have a larger tread width, greater contact area with the ground, and higher friction resistance, resulting in stronger grip. However, they also have higher fuel consumption and greater tire noise. 2. Compared to wide tires: Narrow tires offer better economic practicality, as they are relatively cheaper. Due to their smaller contact area, friction resistance is reduced, leading to better vehicle acceleration performance, lower tire noise, lighter driving feel, and improved fuel efficiency. However, narrow tires have slightly weaker grip and inferior braking performance and handling compared to wide tires.
11
4
Share

What is the standard size of a motorcycle parking space?

The standard size of a motorcycle parking space is 1.93 meters in total length, 0.6 meters in total width, and 1.15 meters in total height. Precautions for choosing underground parking spaces: 1. Choose a location close to the elevator: When selecting an underground parking space, it is best to choose one that is close to the elevator. This is very convenient whether you are picking up your car in the morning or parking at night, especially for women who often return alone. The closer the parking space is to the elevator, the higher the safety. 2. Parking spaces with separate spaces: Parking spaces that are separated by existing buildings or facilities are better, such as parking spaces between two pillars. Generally, there is plenty of space, and it is also very convenient to open and close car doors and reverse on weekdays. You basically don’t need to consider whether it will affect the cars next to you, nor do you have to worry about accidentally bumping into other people’s cars. 3. Choose a parking space close to the pillar: If there is more than one parking space between two pillars in an underground parking lot, it is best to choose a parking space close to the pillar. This way, even if a car is parked on one side, the door on the other side can be opened freely without affecting others and is also convenient for your own use.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.