What type of engine oil is suitable for the Roewe RX5?

1 Answers
DiClaire
07/29/25 6:07pm
Roewe RX5 generally uses 5W-30 fully synthetic engine oil. If the temperature in your area is relatively low, it is recommended to use 0W-30 fully synthetic engine oil. The reasons are as follows: 1. In terms of power, it is divided into two types: 1.5T and 2.0T, matched with three types of transmissions: 6-speed dual-clutch, 7-speed dual-clutch, and 6-speed manual. 2. The vehicle's engine is a turbocharged engine, which has higher lubrication requirements for engine oil because turbocharging operates under high temperature and high speed conditions. In this case, fully synthetic engine oil must be used. 3. With fully synthetic engine oil, maintenance is required approximately once a year or every 10,000 kilometers.
Was this review help?
7
3
Share
More Forum Discussions

How to Replace the Battery in a Peugeot 308 Key?

Peugeot 308 key battery replacement method is as follows: 1. Remove the key ring, use a coin to pry open the key by inserting it into the key groove and twisting; 2. Place the new battery with the positive side facing upwards into the battery slot, gently push the battery until it is fully secured. After replacing the battery, initialization is required to restore the remote control function. The Peugeot 308 is a compact sedan with dimensions of 4590mm in length, 1820mm in width, and 1488mm in height, and a wheelbase of 2675mm. In terms of safety, the vehicle offers multiple airbags, including rear side airbags and a driver's knee airbag. The entire series comes standard with ESP and a traction control system.
8
0
Share

Is the Honda CR-V produced by Dongfeng Honda or GAC Honda?

Honda CR-V is produced by Dongfeng Honda. Dongfeng Honda Automobile Co., Ltd. offers a range of products including the Honda sport utility vehicle CR-V, the mid-size car Civic, the premium sports sedan Spirior, the self-owned brand model CIIMO, the high-end MPV Elysion, the hybrid vehicle Insight, and the new concept car Jade. The Honda CR-V is a classic urban SUV model produced by the company, with dimensions of 4550mm in length, 1820mm in width, and 1685mm in height, and a wheelbase of 2620mm. The vehicle is equipped with a 2.0L DOHC i-VTEC engine, delivering a maximum power of 110kW and a maximum torque of 190Nm.
7
5
Share

Where is the OBD of Dongfeng Peugeot 308 located?

The OBD of the older model Dongfeng Peugeot 308 is located in a small compartment under the ashtray in front of the front gear lever, and it can be seen by removing the black plastic plate below; the OBD of the new model is inside the decorative panel below the steering wheel on the left side, and it can be seen by pulling the panel outward with force. OBD is the on-board diagnostic system, which monitors the operating condition of the engine and the working state of the exhaust after-treatment system at all times. Dongfeng Peugeot 308 is a compact car with a length, width, and height of 4590mm, 1820mm, and 1488mm respectively, and a wheelbase of 2675mm. The car is also equipped with LDWS lane departure warning system, dual xenon headlights, and up to 9 airbags, including 2 side airbags and a steering column airbag.
12
4
Share

What does PEPS mean on a car?

PEPS on a car refers to the Passive Entry Passive Start system, which is a keyless system that allows for intelligent entry and starting. When the driver enters a specified range, the system can identify the authorized driver and automatically unlock the doors. When leaving the vehicle, the doors will automatically lock and enter an anti-theft state. Additionally, the system can remember all service and diagnostic information, such as seat adjustments, air conditioning settings, and entertainment preferences. The working principle of the keyless system is as follows: 1. The driver approaches the vehicle with the key fob. When pressing the vehicle button or pulling the door handle, the vehicle receives a signal to start or unlock and sends a signal to the low-frequency antenna. 2. Upon receiving the signal, the low-frequency antenna sends a low-frequency trigger signal to the key fob. 3. The key fob receives the low-frequency trigger signal and emits a high-frequency unlock signal. 4. The high-frequency receiver receives the unlock signal, and the entire vehicle completes the unlocking or starting process.
11
1
Share

How to Use the Cruise Control in the New Passat?

The usage of the cruise control in the new Passat is as follows: 1. Maintain the car within a certain speed range, flip the small toggle knob above the car's turn signal controller to the ON position; 2. If you need to increase the speed, press the RES plus button above until the speed reaches the desired value; 3. If you need to decrease the speed, press the SET minus button below until the speed reduces to the desired value. The new Passat is a mid-size sedan designed by Volkswagen, which applies advanced engineering technology and surpasses the standard design of mid-size sedans in terms of power performance, overall design, safety concept, driving comfort, durability, and reliability.
5
0
Share

How to Turn on the Heater When There's AUTO in the Car?

Press the "AUTO" button, and the automatic air conditioning will adjust automatically based on the temperature inside the car. You should first start the engine to warm it up, wait until the engine temperature gauge needle reaches the middle position. Turn on the heater air conditioning, and set the air circulation to external circulation to allow the cold air inside the car to be expelled. After waiting for 2 to 3 minutes, set the air circulation to internal circulation. Choose an appropriate air conditioning temperature. Setting the temperature too low in summer can affect health, so the air conditioning temperature adjustment must be appropriate.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.