What type of engine oil is suitable for the Roewe RX5?

2 Answers
McBenjamin
07/24/25 10:02pm
Roewe RX5 requires 5W-30 fully synthetic engine oil. Engine oil, also known as Engine-oil in English, serves multiple functions for the engine including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. It is often referred to as the "blood" of a car. Below is an introduction to engine oil-related information: 1. There are 4 types of summer oils, 6 types of winter oils, and 16 types of all-season oils. The summer oil grades are: 20, 30, 40, 50, 60, with higher numbers indicating greater viscosity and suitability for higher maximum temperatures. 2. The winter oil grades are: 0W, 5W, 10W, 15W, 20W, 25W. The letter W stands for Winter, and the smaller the number before W, the lower the low-temperature viscosity and the better the low-temperature fluidity, making it suitable for lower minimum temperatures.
Was this review help?
15
3
Share
McEliza
08/10/25 2:51pm
For the Roewe RX5, I believe the suitable engine oil mainly depends on the engine model. Typically, it's SAE 5W-30 synthetic oil, and the manufacturer recommends high-quality API SN-grade oil. From my experience, using inappropriate oil, such as low-quality oil or mismatched viscosity, can lead to increased engine noise, higher fuel consumption, and accelerated wear over time. I advise owners to always check the manual, as it clearly specifies the requirements—don’t switch oils blindly. I drive a similar car myself, and after switching to a reputable brand, the ride became smoother, acceleration more responsive, and maintenance intervals longer. Additionally, consider seasonal changes when choosing oil—lower viscosity oil is better for cold starts in winter. It’s best to purchase from authorized dealers to avoid counterfeit products, as the quality of engine oil directly impacts the car’s lifespan. This is not something to take lightly.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

How Long Can a Car Be Driven Before Scrapping?

Non-commercial vehicles and commercial vehicles have different scrapping periods, as detailed below: Scrapping regulations for non-commercial vehicles: For household 5-seat sedans and 7-seat SUVs, as well as small and micro non-commercial vehicles, there is no usage period limit. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping. In addition to the above vehicles, small and micro non-commercial passenger cars, large non-commercial sedans, and wheeled special machinery vehicles also have no usage period limit. Common scrapping regulations for commercial vehicles: Small and micro taxi passenger vehicles have a scrapping period of 8 years, medium-sized taxi passenger vehicles have a scrapping period of 10 years, and large taxi passenger vehicles have a scrapping period of 12 years. Public transport passenger vehicles have a scrapping period of 13 years, other small and micro commercial passenger vehicles have a scrapping period of 10 years, and large and medium-sized commercial passenger vehicles have a scrapping period of 15 years. Micro commercial trucks have a scrapping period of 8 years, light and large commercial trucks have a scrapping period of 10 years. The vehicle scrapping process is as follows: The car owner applying for scrapping and renewal must fill out the "Motor Vehicle Change, Transfer, Modification, Suspension, Scrapping Approval Application Form" in duplicate and affix the owner's seal. The registration office will accept the application and issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping period. For vehicles that have not reached the scrapping period, the motor vehicle inspection office will determine if they meet the scrapping standards and issue a "Vehicle Scrapping Notice". The owner will choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner must submit the "Change Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the motor vehicle inspection office for verification and signature. The license plates will be reclaimed, and the approval will be processed according to regulations to complete the scrapping registration. Special notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if the vehicle is damaged and cannot be driven back to the registration location, the owner can hand over the scrapped vehicle to a local motor vehicle recycling company. If a commercial vehicle is converted to a non-commercial vehicle, it must be scrapped according to the original commercial vehicle's scrapping period. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation registration of a motor vehicle, the original owner can apply to the vehicle management office to use the original license plate number when registering a newly purchased motor vehicle. The application to use the original license plate number must meet the following conditions: (1) The application must be submitted within six months after the transfer or cancellation registration; (2) The owner must have owned the original vehicle for more than three years.
8
1
Share

What does the seek button mean?

seek button is used to switch radio channels, which is to find radio stations. The usage method of the seek button is: 1. Press the left button in the CD playback state to play the current music from the beginning; 2. Continuously pressing the left or right button will cycle through the current disc from the current position. Other CD buttons in the car include: 1. mute; 2. mode selection; 3. auto volume control; 4. volume control; 5. channel selection; 6. radio station scan; 7. sound effect selection; 8. preview button; 9. repeat playback; 10. random playback.
4
5
Share

Why is the low beam working but the high beam not?

When the low beam is working but the high beam is not, it indicates that the high beam bulb is damaged. In vehicle lighting systems, there are integrated headlights that combine both high and low beams, as well as separate high and low beam headlights. This situation involves separate headlights where the high beam bulb controls the high beam, and the low beam bulb controls the low beam, operating under separate controls. Car headlights, also known as automobile front lights or LED daytime running lights, serve as the 'eyes' of the car. They not only affect the owner's external image but are also crucial for safe driving at night or in adverse weather conditions. Therefore, the use and maintenance of car lights should not be overlooked.
14
3
Share

What Causes the Parking Brake Failure in BMW 5 Series?

BMW 5 Series parking brake failure is usually caused by severe brake wear or excessive brake clearance, and timely replacement of the brake can resolve the issue. The parking brake, commonly referred to as the handbrake, is now installed in many motor vehicles as a manual brake to stabilize the vehicle after it comes to a stop, preventing accidents caused by rolling on sloped roads. Taking the BMW 5 Series 2021 Modified 525Li Luxury Package as an example: The manufacturer of this car is BMW Brilliance, classified as a mid-to-large-sized car, with a gasoline energy type, an 8-speed automatic transmission, and a 4-door 5-seater sedan body type.
3
5
Share

Where is the Chevrolet Cruze Water Pump Located?

The Chevrolet Cruze water pump is located inside the engine block. The function of the car water pump is to pressurize the coolant, ensuring its circulation within the cooling system. This allows water to continuously cycle through the radiator and engine block components, carrying away heat and preventing the engine from overheating. Below are the main symptoms of a damaged water pump: 1. A damaged water pump weakens or stops the cooling circulation, leading to coolant boiling. 2. Coolant leakage near the engine's water pump area leaves traces of coolant color at the pump's vent holes, causing symptoms like high water temperature due to insufficient coolant. 3. Unusual noises from the water pump during engine operation, which may be caused by internal debris or bearing wear.
16
2
Share

Why does the transmission fault alarm come on and then go away after a while?

When a transmission fault alarm comes on and then goes away after a while, it is usually due to a false triggering of the fault code in the transmission computer. This is generally an occasional and common issue that does not harm the vehicle. After restarting the car, the transmission computer refreshes the stored fault code. If the fault no longer exists at this point, the fault code will disappear on its own. The transmission consists of a gear transmission mechanism and a control mechanism, and some vehicles also have a power output mechanism. It can be categorized into stepped, continuously variable, and integrated transmissions, and it functions to enable reverse driving, interrupt power transmission, and change gear ratios.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.