What type of engine oil is suitable for the Roewe i5?

How Long After Obtaining a C1 License Can You Take the B2 Test?

You can apply for a B2 license upgrade after reaching 20 years of age and completing the probationary period of your C1 driver's license. Additionally, you must meet the condition of not having accumulated 12 penalty points in the current scoring cycle or the most recent scoring cycle prior to application. The B2 driver's license is for large trucks, which include heavy-duty and medium-duty trucks. Heavy-duty trucks are defined as those with a vehicle length of 6 meters or more and a total mass of 12,000 kilograms or more. Medium-duty trucks are defined as those with a vehicle length of 6 meters or more and a total mass between 4,500 kilograms and less than 12,000 kilograms. Drivers holding licenses for large buses, tractors, city buses, medium buses, or large trucks who accumulate 6 or more penalty points (but fewer than 12) during their one-year probationary period will have their probationary period extended by one year.

17

1

Share

Does the Audi A6 have high fuel consumption?

Audi A6 has moderate fuel consumption, ranging from 6.5L to 10.9L. Here is relevant information: 1. Technology: The all-new Audi A6L's engines all feature direct fuel injection technology, offering four comprehensively upgraded gasoline engines - 2.0TFSI, 2.5FSI, 2.8FSI, and 3.0TFSI, fully meeting consumers' diverse power requirements. 2. Regulations: Compressed natural gas vehicles of M2, M3, N2, and N3 categories with a maximum design total mass exceeding 3.5t; M2, M3 category vehicles and N category vehicles with a maximum total mass greater than or equal to 2t shall comply with the test method specified in GB/T-12545.2-2001 'Test Method for Fuel Consumption of Commercial Vehicles'.

9

0

Share

Where is the Borgward engine produced?

Borgward automobile engines are produced at the intelligent factory in Miyun, Beijing, utilizing German technology, and are classified as domestically produced engines. The Borgward BX7 model is equipped with the 4G20TI1 engine. The mid-to-low efficiency version of the engine has a maximum power of 148kW and a maximum torque of 300Nm. The high-power version of the engine has a maximum power of 165kW and a maximum torque of 300Nm. Here are some methods for daily maintenance of Borgward automobile engines: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.

5

0

Share

What engine does the V5 Lingzhi use?

The V5 Lingzhi is equipped with the 4A91 engine model, delivering a maximum horsepower of 120 HP, a maximum power output of 88 KW at 5000-6000 rpm, and a peak torque of 143 Nm. The engine of the V5 Lingzhi is assembled by Mitsubishi, making it a domestically produced engine. For daily maintenance of the V5 Lingzhi's engine, the following methods can be applied: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine issues. To avoid malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder wall, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

4

1

Share

Is the Evoque fuel consumption high?

Domestically produced Land Rover Range Rover Evoque has low fuel consumption, with a combined fuel consumption of 9 liters. The Evoque has the following advantages: 1. Advantage one: It features a highly recognizable and stylish front face, which is both full and rich with distinct layers. Beneath its youthful and fashionable appearance lies a rugged temperament. The simple front face paired with sharp headlights perfectly showcases Land Rover's domineering presence, exuding an imposing aura from afar. 2. Advantage two: Unlike its bold and domineering exterior, the interior is relatively simple, with each functional area clearly divided. The materials used are also quite exquisite, with leather materials paired with exquisite stitching, in line with its luxury car nature. 3. Advantage three: The safety features are neither extravagant nor very practical, including driver and passenger airbags, front and rear side airbags, tire pressure monitoring, brake assist, brake force distribution, traction control, vehicle stability system, and ABS anti-lock braking system.

1

0

Share

What is the difference between the two-wheel drive and four-wheel drive versions of the Tiguan L?

Detailed introduction about the two-wheel drive and four-wheel drive versions of the Tiguan L is as follows: 1. The four-wheel drive version connects the two axles on all four wheels: It is equipped with a drive distribution device that can control the driving force of each wheel based on the friction between the wheel and the ground, maximizing the utilization of the engine's driving force. 2. The Tiguan L offers front-wheel drive and front-engine four-wheel drive configurations: Front-wheel drive means the engine is positioned at the front and drives the front wheels, featuring a simple mechanical structure, good engine cooling conditions, spacious interior, easy layout, reduced overall vehicle weight, better fuel efficiency, and convenient maintenance; Front-engine four-wheel drive refers to the engine being positioned at the front and driving all four wheels, offering superior handling performance. 3. The four-wheel drive version of the Tiguan L has more prominent power: The four-wheel drive Tiguan L can distribute the engine's power to all four wheels, significantly improving the vehicle's handling and off-road capability. Although the two-wheel drive version of the Tiguan L has no difference in appearance, interior, driving visibility, and ride comfort compared to the four-wheel drive version, the engine load of the two-wheel drive version is significantly reduced, leading to a substantial decrease in fuel consumption.

2

5

Share

What type of engine oil is suitable for the Roewe i5?

How Long After Obtaining a C1 License Can You Take the B2 Test?

Does the Audi A6 have high fuel consumption?

Where is the Borgward engine produced?

What engine does the V5 Lingzhi use?

Is the Evoque fuel consumption high?

What is the difference between the two-wheel drive and four-wheel drive versions of the Tiguan L?

What is the function of the Jetta's small water tank?

What is the wading depth of the Golf 7?

Is the Wrangler an imported vehicle?

How to Change the Transmission Fluid for Audi Q7?