···
Log in / Register

What type of engine oil is suitable for the Roewe 350?

4 Answers
LaCamilla
08/30/25 6:13am
The Roewe 350 uses engine oil with the specification 5W-30. Below are the detailed specifications of the Roewe 350: 1. Vehicle Positioning: The Roewe 350 is a compact sedan positioned in the A-segment market, launched by SAIC Motor following the Roewe 750 and Roewe 550. It measures 4521/1788/1492 mm in length, width, and height. 2. Powertrain: The Roewe 350 is equipped with a 1.5T Hyperboost turbocharged engine, delivering a maximum power of 95 kW (129 PS) at 5500 rpm and a peak torque of 210 Nm between 2000-4400 rpm. It is paired with either a 6-speed manual or a 6-speed automatic transmission.
Was this review help?
13
0
Share
StKhloe
09/12/25 3:18am
I've been driving a Roewe 350, and the best choice for this car is 5W-30 full synthetic engine oil. With over 80,000 kilometers on the odometer, my experience is not to skimp on oil costs—it's best to use brands like Mobil or Shell. Cold starts in winter are smooth, and the oil doesn't thicken in summer heat, protecting the engine. The manual recommends this viscosity, and changing it every 5,000 kilometers is the safest bet. When checking the oil level, park and turn off the engine for a few minutes before checking the dipstick; as long as the oil level is in the middle, it's safe. I maintain regular service, and the engine has never had any issues. If you use cheaper mineral oil, carbon buildup is likely, and the engine noise increases. Pay attention to driving habits—smooth driving reduces wear and tear, making the oil last longer. In short, choosing the right oil is key to driving with peace of mind and longevity.
Was this review help?
6
3
Share
Expand All
OscarAnn
09/12/25 3:20am
As a car enthusiast, choosing 5W-30 full synthetic oil for the Roewe 350 is absolutely correct! The viscosity perfectly matches this engine, ensuring quick cold starts, excellent high-temperature fluidity, and enhanced acceleration. Having tested various oil types, I can confirm full synthetic offers clear advantages in fuel efficiency and noise reduction. The maintenance manual specifically recommends this grade. Change intervals depend on driving conditions - typically every 7,500 km or 6 months. Use 5W for cold weather (though it works fine in heat too). Simply check the dipstick to ensure proper oil level. Always opt for reputable brands like Castrol to avoid counterfeits. Quality oil extends engine life and boosts highway confidence. Adjust intervals if you frequently take long trips. Pro tip: Monitor performance changes post-oil-change for added enjoyment!
Was this review help?
19
3
Share
Expand All
Etta
10/26/25 4:08am
Recommended engine oil for Roewe 350 is 5W-30 full synthetic. I often see this in car repairs, its viscosity is ideal for engine protection. When checking, park and wait a while, then ensure the dipstick shows normal oil level for safety. Change oil every 6 months or 5,000 km. Avoid wrong viscosity like 10W-40, which is too thick and wastes fuel. DIY oil change is simple, just buy API-certified brand oil. Good maintenance reduces wear and extends engine life. Regularly check fluids to spot issues early.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

How many days after paying the purchase tax can you license a vehicle?

Purchase tax should be paid within two months, and the sooner it is paid, the better. There is no time limit for licensing. Objects of vehicle purchase tax: Vehicle purchase tax is levied on listed vehicles, and unlisted vehicles are not taxed. The scope of taxation includes cars, motorcycles, electric vehicles, trailers, and agricultural transport vehicles. Materials required: Copy of organization code (for institutional purchases) or ID card (for individual purchases); Tax payment copy of the "Unified Invoice for Motor Vehicle Sales" or "Customs Duty Payment Certificate" and "Customs Code Consumption Tax Payment Certificate"; Original and copy of the vehicle qualification certificate or "People's Republic of China Entry-Exit Inspection and Quarantine Import Motor Vehicle Inspection Certificate" (for imported vehicles); Original and copy of the technical parameter table for motor vehicle registration.
6
5
Share

What Causes a Fan Clutch to Fail?

Fan clutch failure can be attributed to the following causes: damaged bimetal temperature sensor, silicone oil leakage, or broken silicone fan drive pin. Details are as follows: Damaged Bimetal Temperature Sensor: When the bimetal temperature sensing port is damaged, the fan clutch cannot engage or disengage in response to the air temperature behind the radiator, remaining permanently disengaged. This results in engine overheating. Silicone Oil Leakage: Silicone oil serves as the primary transmission medium in the fan clutch. When leakage reaches a certain level, power transmission fails. Broken Silicone Fan Drive Pin: This causes the oil outlet valve plate to remain open under spring force, allowing silicone oil from the reservoir to continuously enter the working chamber. Consequently, the fan clutch remains engaged, leading to excessively slow engine warm-up.
9
1
Share

Can the Tire Pressure Monitoring System Be Installed by Oneself?

Tire pressure monitoring systems can be installed by oneself. However, if the original vehicle does not come with one, it is recommended that car owners go to a 4S shop or a repair shop for installation, as it provides more peace of mind with after-sales service guarantees. The functions of the tire pressure monitoring system and the method to eliminate alarms are as follows: Functions of the Tire Pressure Monitoring System: The tire pressure monitoring system not only alerts the owner when there is high pressure, low pressure, or high temperature in the tires, ensuring driving safety, but also helps owners save fuel and money, contributing to low-carbon and environmentally friendly driving. By continuously monitoring tire conditions, the system helps prevent tire blowouts and promotes fuel efficiency and environmental protection. Method to Eliminate Tire Pressure Alarms: Check and confirm whether the tire pressure is normal. If there are issues, adjust it to the standard pressure, then drive a few kilometers. Generally, the system will automatically reset at this point. If the tire pressure is confirmed to be normal, visit a car service shop to check the tire pressure sensors and clear any fault codes. If necessary, manually reset the system by locating the settings button on the central console.
7
1
Share

Is it okay to turn off an automatic transmission car without shifting to P gear?

You can turn off the car without shifting to P gear before shutting down the engine, but it may damage the transmission and engine. Here is some information about engine shutdown: 1. Introduction: Also known as flameout. Generally refers to the engine shutting down. 2. Operation: When the reactor is operating at a significant reaction rate, if the inlet temperature is lowered to the lower limit of the multiple-state region, the reaction rate will suddenly drop significantly, and the reaction will basically stop. This phenomenon is called flameout. The corresponding inlet temperature is called the flameout point. 3. Precautions: For beginners, stalling midway is not a new topic. The main solution is to improve driving skills after a quick break-in period.
11
3
Share

What do S and L mean in an automatic transmission?

S mode stands for Sport mode, and L mode stands for Low gear mode. Below is a related introduction to the various gears in an automatic transmission car: 1. P gear: This is the Parking gear, which uses a mechanical device inside the transmission to lock the rotating parts of the car. It must only be used when the vehicle is completely stopped. Additionally, when the car is turned off, the gear must be in P. 2. N gear: This is the Neutral gear, generally used for short stops. When in neutral, the right foot can leave the brake pedal to rest. However, on slopes, you still need to press the brake to prevent the car from rolling unless the handbrake or electronic brake is engaged. 3. D gear: This is the Drive gear. When in D gear, the driver only needs to control the accelerator pedal to adjust the speed. The transmission will automatically determine the appropriate gear based on the throttle input and vehicle speed, eliminating the need for manual gear shifting.
12
3
Share

What happens if you press the brake and rev the engine in an automatic transmission car?

Car won't move, and this can cause significant damage to both the engine and transmission, accelerating vehicle wear. Below is relevant information about the car throttle: 1. Function of car throttle: In gasoline engines, the throttle doesn't control fuel injection volume but rather regulates the throttle valve opening size. A smaller opening means less air-fuel mixture enters the cylinders, resulting in lower engine power output, and vice versa. 2. Solutions for stiff throttle: A stiff throttle can be addressed by cleaning the fuel system. Alternatively, try continuing acceleration to see if engine RPM increases without corresponding speed gain - if so, it might indicate a damaged sensor in the transmission locking the overdrive gear.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.