What type of engine oil is suitable for the Regal?

1 Answers
LaKingston
07/30/25 12:11am
The Regal uses 5W30 engine oil. Compared to 5W40 and 5W30, the low-temperature fluidity performance is the same, but the difference lies in the high-temperature performance. 5W40 has higher viscosity, providing better high-temperature protection and sealing performance. However, the increased viscosity results in greater engine running resistance and higher fuel consumption. For the Regal engine, 5W30 engine oil is more suitable. 1. Different Models For the Regal, depending on the vehicle configuration, the factory-fill engine oil is either dexos™ engine oil or engine oil that meets GM6094M or GM4718M standards. When changing the engine oil, if the engine oil filler cap has a dexos logo, it is recommended to use engine oil with the dexos™ certification mark. The Regal is suitable for engine oil identified by the dexos™ certification mark. Look for and use engine oil that displays the dexos™ certification mark with the correct viscosity grade, or engine oil that meets General Motors GM6094M standard and is certified by the American Petroleum Institute (API), with a viscosity grade of SAE5W-30. For vehicles equipped with a Turbo engine, use engine oil that meets General Motors GM4718M standard and is certified by the American Petroleum Institute (API), with a viscosity grade of SAE5W-30. 2. Different Engines Naturally aspirated engines have lower requirements for engine oil and can use mineral oil or semi-synthetic oil. If the consumer's budget allows, fully synthetic oil can be used. Compared to naturally aspirated engines, turbocharged engines have a more compact structure and operate in more complex conditions, requiring higher-quality engine oil with better fluidity. It is best to use fully synthetic oil.
Was this review help?
19
1
Share
More Forum Discussions

How Many Chances Are There for the Subject 1 Test?

There is no limit to the number of attempts for Subject 1. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," candidates can take the Subject 1 test twice on the same day. If the first attempt is unsuccessful, a free retake is allowed for the second attempt. If the second attempt also fails, the Subject 1 test is terminated for that day, and the candidate must wait at least 10 days before scheduling another test. Subject 1, also known as the theoretical test or driver's theory test, is part of the motor vehicle driver's license examination. The test covers driving theory basics, road safety laws and regulations, local regulations, and other related knowledge. The test is computer-based and has a time limit of 45 minutes. To pass the Subject 1 test, a score of 90 out of 100 is required. The test consists of 100 questions, including single-choice and true/false questions, with each question worth 1 point. If a candidate answers 11 questions incorrectly during the test, the system will automatically submit the test and end the session. Subject 1 test content includes: driver's license and motor vehicle management regulations; road traffic conditions and rules; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: Candidates should dress appropriately (no slippers), and electronic devices and bags are not allowed in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in lockers before entering the examination room. Upon entering, verify your identity at the assigned station and begin the test. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it; unsigned reports are invalid. While there is no limit on Subject 1 attempts, Subject 2 and Subject 3 allow only five attempts each. If a candidate fails five times, any previously passed road driving skill test results will become invalid. The driver's license test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safe driving common sense. The safe driving common sense test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official terminology (under the Ministry of Public Security’s Order No. 123) does not include a "Subject 4."
16
1
Share

How to Match the Skoda Steering Angle Sensor?

After starting the vehicle, turn the steering wheel all the way to the left and hold for five seconds, then turn it all the way to the right for five seconds, and finally return it to the center to complete the matching. Function of the Steering Angle Sensor: The steering angle sensor is a device used to detect the rotation angle and direction of the steering wheel. It is an equipment designed to determine the angular position of a shaft, such as the steering column, and includes a coil set, coil holder, and coupler element, which has a coupler angular position related to the angular position of the shaft. Steering Wheel Angle Sensor: It is one of the key components for implementing "ESP" active braking. Not only does it detect the rotation angle of the steering wheel, but it also provides relevant signals to the "ECU" system as the basis for "ESP" control.
11
1
Share

Is the MG 5's space small?

MG 5 has a spacious interior. In terms of body dimensions: The MG 5 is a compact car with a length of 4704mm, width of 1848mm, height of 1466mm, and a wheelbase of 2715mm. It has a fuel tank capacity of 50 liters and a fuel consumption of only 6.2L per 100km. The curb weight is 1300kg, and it meets the China 6 emission standards. In terms of powertrain: The MG 5 features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5L turbocharged engine that delivers a maximum horsepower of 181PS and a maximum power of 133kW, paired with a 6-speed manual transmission.
10
1
Share

What Causes the Abnormal Noise When Accelerating in a Passat?

The reasons for abnormal noise when accelerating in a Passat include: engine overheating causing loss of power; clogged internal engine valves; exhaust pipe leakage; throttle blockage; engine misfire; insufficient power steering fluid; damaged generator bearings; issues with the power steering pump or water pump, etc. Excessive Engine Oil: This increases the instantaneous working resistance of the engine, raising the crankshaft's rotational resistance and reducing the engine's output power. Additionally, excess oil can enter the combustion chamber and participate in combustion, leading to oil burning, blue smoke emission, and increased fuel consumption. Incorrect Engine Oil Type: For example, switching from full synthetic to mineral oil. Therefore, it's essential to change the oil at a reputable shop using genuine oil, as counterfeit or substandard oil can cause significant engine damage.
9
0
Share

What is the original tire model of the Geely Boyue?

Geely Boyue original tire model is 225/60-R18. Functions of tires: Mainly include dry grip, anti-hydroplaning, providing comfort, reducing driving noise, impact resistance, wet grip, load-bearing capacity, handling performance, average wear, and mileage. Tire cross-sectional structure: Generally can be divided into 4 parts: tread, shoulder, sidewall, and bead. Each part has its own function. The tread mainly contacts the ground, the shoulder and sidewall provide support, and the bead contacts the wheel rim to provide sealing. Internal composition of tires: The interior of the tire is composed of multiple layers of different materials, including tread pattern, overlay, steel belt layer, stress-absorbing rubber strip, carcass ply layer, and inner liner.
7
5
Share

What is the appropriate tire pressure for a Jeep Cherokee?

The standard tire pressure for a Jeep Cherokee is 2.4-2.5 bar. It may vary depending on specific conditions, as both overinflation and underinflation can compromise driving safety and comfort. Effects of underinflation: Underinflation increases tire body deformation, making the sidewalls prone to cracking. It also causes excessive flexing movement, leading to overheating, accelerated rubber aging, fatigue of the cord layers, and cord breakage. Additionally, it increases the tire's contact area with the ground, accelerating shoulder wear. Effects of overinflation: Overinflation causes excessive stretching deformation of the tire cords, reducing the tire body's elasticity. This increases the load on the vehicle during driving, potentially leading to internal cracks or blowouts upon impact. Overinflation also accelerates tread wear and reduces puncture resistance.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.