What type of engine oil is suitable for the new Sylphy?

What is the initialization method for Wuyang-Honda's i-FI electronic fuel injection system?

The method is: the engine kill switch must be in the ON position; turn the ignition key to ON and immediately turn it off, then wait for 20 seconds; turn the key on and off 5 times at a rate of one cycle per second; wait another 20 seconds, then turn the ignition key to ON. If the yellow malfunction indicator light on the dashboard does not illuminate and the fuel pump operates normally, the reset is successful. Left turn signal operation method: Push the light control lever downward to activate the left turn signal. Turn signal operation method: Simply lift the control lever upward to activate. High beam operation method: After switching the lights to low beam, push the lever forward to activate high beam. The high beam and high beam flash functions are controlled by moving the lever to corresponding positions.

3

Share

How to Use the Car Push-On-Off Pedal?

Car push-on-off pedal is the foot brake. Convenient for parking: This is the foot brake, serving the same function as the handbrake, mostly found in automatic transmission vehicles, making it easier for women with less strength to complete parking effortlessly. Preventing vehicle skidding: It serves the same purpose as the conventional handbrake in cars, mainly used to prevent the vehicle from sliding when parked. Never press it while driving, as it won't spring back automatically; you need to press it again to release. Pressing it while driving can easily engage the foot brake. Replacing the handbrake: The parking brake, commonly known as the foot brake, is now used in many car models to replace the handbrake.

1

2

Share

How to Remove Residual Adhesive from Car Film?

Methods to remove residual adhesive from car film: 1. Wipe it off with a wet cloth; 2. Spray professional adhesive remover and then wipe it off; 3. Use foam cleaner to remove. The functions of car film are: 1. It can prevent glass from accidental breakage or scratches. When the glass with film is accidentally impacted and broken, the tightly bonded film will slow down the impact speed of glass fragments, playing an anti-explosion role; 2. It can avoid direct sunlight exposure to the interior decorations and items. High-quality car film can effectively absorb more than 90% of ultraviolet rays; 3. It can filter glare and enhance driving safety.

5

2

Share

Should You Turn Off the Engine Before Shifting to P Gear or Shift to P Gear Before Turning Off the Engine?

It is best to turn off the engine before shifting to P gear. Engine shutdown method: Normally, when parking the car, first bring the car to a complete stop, then shift the gear to N gear, engage the handbrake, turn off the engine, and then shift to P gear. This is the correct way to turn off the engine. The correct steps for starting an automatic transmission car are: Press the brake, engage the handbrake, start the engine (do not directly shift to D gear; shift to N gear first and then start the engine, then shift from N gear to D gear), release the handbrake, release the foot brake, and release the handbrake (for electronic handbrakes, simply press the button briefly). You can choose to warm up the car in place, and the time can be determined based on the environment. Press the accelerator and start moving. Depending on the road conditions, press the accelerator smoothly to accelerate and drive safely.

13

2

Share

What is the reason for the continuous rotation of the EA888 third-generation fan?

First, purge the air inside the engine. If the fan continues to run constantly, replace the water pump again. Impact on engine lifespan: The cooling fan is a crucial component of the vehicle's cooling system. The performance of the fan directly affects the engine's heat dissipation efficiency, which in turn influences the engine's performance. If the fan is improperly selected, it can lead to insufficient or excessive cooling of the engine, worsening the engine's working conditions and thereby affecting its performance and lifespan. Components of the cooling system: The cooling system of an automobile engine is a forced circulation water-cooling system, which uses a water pump to increase the pressure of the coolant, forcing it to circulate within the engine. The cooling system mainly consists of the water pump, radiator, cooling fan, expansion tank, thermostat, water jackets in the engine block and cylinder head, as well as auxiliary components.

12

1

Share

Where is the hazard light switch located in an automatic transmission car?

Automatic transmission hazard light switch is located on the center console to the right of the steering wheel. In some models, the hazard light switch may be positioned below the center console. The hazard light switch is a red triangle. Car hazard lights, correctly called hazard warning flashers. According to traffic regulations, they must be used in certain road conditions. In weather conditions with reduced visibility caused by rain or fog, hazard lights can be activated. When a vehicle breaks down or is involved in an accident on the road, hazard lights should be turned on to warn passing vehicles. When towing a faulty vehicle, both the towing vehicle in front and the towed faulty vehicle behind must simultaneously activate hazard lights to alert other vehicles on the road to maintain distance and be aware there's another vehicle behind. Hazard lights should also be activated when slowing down to prompt other vehicles to detour or overtake. Hazard lights are more widely used in parking lots. For example, when parking in a large parking lot and unable to find the parking spot upon return, you can press the remote control to activate hazard lights to help locate your vehicle.

9

2

Share

What type of engine oil is suitable for the new Sylphy?

What is the initialization method for Wuyang-Honda's i-FI electronic fuel injection system?

How to Use the Car Push-On-Off Pedal?

How to Remove Residual Adhesive from Car Film?

Should You Turn Off the Engine Before Shifting to P Gear or Shift to P Gear Before Turning Off the Engine?

What is the reason for the continuous rotation of the EA888 third-generation fan?

Where is the hazard light switch located in an automatic transmission car?

How to turn off the TC slash indicator on the car?

What is the difference between dual-clutch and AT?

Where is the hazard warning light switch for automatic transmission?

How to Report Illegal Use of Emergency Lanes on Highways?